Weather & Waterproofing

DPM Black Polythene Damp Proof Membrane

The polythene is used to protect buildings from the passage of water and water vapour from the ground when installed to appropriate standards. 

Product Information:

- For creating a damp proof membrane in a floor

- Size: 4mts x 25mts full roll

- Colour: Black

*Please scroll down to view all lengths & widths.*

Code 3 Cast Lead

Product Information:

- Lead (cast) roll

- Gauge: Code 3

- Length: Listed Below.

- Width: Listed Below.

*Please scroll down to view all lengths & widths.*

Code 4 Cast Lead

Product Information:

- Lead (cast) roll

- Gauge: Code 4

- Length: Listed Below.

- Width: Listed Below.

Black Bitumen Paint Black Jack - All Sizes

BlackJack 901 is a solvent-based, full-bodied black bituminous paint. When dry, the product forms an odourless and taintfree black film suitable for metal protection as well as overcoating wood and felt.

Product Information: Black Jack Bitumen Paint.pdf

- Fast drying solvent based paint.

- Suitable for use on most building surfaces.

- Resistant to most salt solutions, dilute acids, alkalis, water, and alcohol.

- Provides a waterproof, weatherproof, and corrosion resistant protective coating.

- Size: Listed below

Everbuild BlackJack 908 DPM - 5 Ltr

908 DPM is a rubber enriched bitumen emulsion which provides a highly-effective sandwich damp proof membrane for floors. It also acts as a waterproofer for walls, above ground structures and foundations.

Product Information:

- Suitable for internal and external use

- Suitable as an adhesive for wood block and mosaic panels, insulation boards, expanded polystyrene, cork and as a plaster bonding agent, even on difficult surfaces

- Can be used as a curing agent for concrete

- Low hazard – water clean up

- Suitable as an adhesive or bonding aid

- Size: 5 Litres

Evercryl One Coat Waterproofing Roof Coating - Grey

Evercryl is instantly waterproof when applied there is no fear of wash off so emergency leaks can be tackled immediately, and there is no need to wait for the rain to stop,.

For use on concrete, fibre/cement, roofing felt, mastic asphalt, existing bituminous roof coatings, rigid PVCu, corrugated iron, metals, slates, brickwork, tiles, lead, copper and zinc

Also for waterproofing guttering (plastic and metal), downpipes, gulleys, flashings, upstands, vents and leadwork.

Product Information:

- Application: One coat.

- Fast drying solvent based.

- Fibre reinforced.

- Use in wet or dry conditions.

- Bridges small cracks in one go.

- Provides instant and total water protection.

- For sealing, repairs, general maintenance, and waterproofing.

- Size: Listed below

Everbuild Liquid Roof - 7kg - Slate Grey

Liquid Roof is an easy to use, all weather roofing system ideal for waterproofing any flat or pitched roofs, creating a solid waterproof membrane covering the entire surface area without any seams.

Product Information:

Liquid Roof is a polyurethane based, cold applied, ready to use product ideal for use on roof areas for new projects, extensions or to refurbish an existing, leaky roof with excellent adhesion to both porous and non-porous substrates.

- Provides cost-effective life-cycle extension of failing roofs

- Fast-curing – rain resistant in 10 minutes

- Ready to use

- Can be reinforced with Sikalastix Fleece 120

- Easily recoated, no stripping required

- Retains flexibility even at low temperatures

- Compatible with most common substrates

- Size: 7kg

One Coat Water Seal (Thompsons) - 5 litres

Protects against water damage in one application due to the silicone micro emulsion effectively penetrating below the surface of porous materials carrying waterproofing resins deep into the pores of the substrate.

The breathable waterproofing membrane allows moisture vapour inside the substrate to evaporate whilst protecting against water penetration and damage.

The invisible membrane is protected from ultraviolet light and is long lasting even under heavy moisture conditions.

Assuming application instructions and coverage guidelines are adhered to it provides effective water repellency for years in just one coat.

The RSLTWSU5L waterseal can be used on brickwork, stone and other cement surfaces and has the following technical details.

Product Information:

- Coverage: 4m2 / litre,

- Size: 5 litre.

DrySeal Masonry Protection Cream - 3 Litres

DrySeal is a unique, thixotropic, water-repelling masonry protection cream which can be used on a range of building materials. Depending on the porosity of the substrate, the effective siloxane ingredient penetrates the substrate within a short period of time (30 minutes to several hours), where it reacts to become a permanent, chemically bonded, silicone coating.

DrySeal appears white when applied, but dries completely clear, and prevents liquid water from penetrating the substrate but remains vapour permeable, allowing substrates to breathe.

Typical uses:

Ideal for walls with cavity fill insulation, to prevent saturatuion through rain penetration, Ideal for walls with cavity fill that has already become saturated, as DrySeal allows the masonry to breath encouraging it to dry out and preventing any further water ingress.

Product Information:

- BBA Approved

- Easy application by brush, roller or low-pressure spray.

- Protects against efflorescent salts which damage paintwork.

- Becomes effective straight after drying (approx. 3 hours).

- Can be applied to damp surfaces.

- Improves insulation by keeping surfaces dry.

- Allows surfaces to breathe.

- Appears white when wet for easy application.

- Dries colourless and does not stain surfaces.

- Helps keep substrate dry so improves insulation by 25%.

Wykamol Tanking Slurry - 20kg Bag in a Bucket BBA - Coverage approx 7sqm per tub

Wykamol Tanking Slurry is a cementitious waterproofing system which creates a monolithic bond using crystalline chemicals when applied to concrete and masonry structures. BBA and WRAS approved. Can also be used as a radon barrier with appropriate application.

When mixed with clean water and applied correctly, Wykamol Tanking Slurry forms a permanent waterproof coating to the concrete and masonry and is easily applied by brush, roller or spray.

Tanking Slurry waterproofs against positive and negative hydrostatic heads of water and is suitable for use, internally, externally, above and below ground. Tanking slurry is ideal for use as part of a damp-proofing course (DPC).

Typical Uses: 

Product Information:

Thermaldry Anti Condensation Coating - 2.5 Litres

DPC Damp Proof Course - 100mm x 30 metres

For creating a damp proof membrane in a wall.

Product Information:

- Colour: Black

- Width: 100mm

- Sold in 30 metre rolls

DPC Damp Proof Course - 150mm x 30 metres

For creating a damp proof membrane in a wall.

Product Information:

- Colour: Black

- Width: 150mm

- Sold in 30 metre rolls

DPC Damp Proof Course - 225mm x 30 metres

For creating a damp proof membrane in a wall.

Product Information:

- Colour: Black

- Width: 225mm

- Sold in 30 metre rolls

DPC Damp Proof Course - 300mm x 30 metres

For creating a damp proof membrane in a wall.

Product Information:

- Colour: Black

- Width: 300mm

- Sold in 30 metre rolls

DPC Damp Proof Course - 450mm x 30 metres

For creating a damp proof membrane in a wall.

Product Information:

- Colour: Black

- Width: 450mm

- Sold in 30 metre rolls

DPC Damp Proof Course - 600mm x 30 metres

For creating a damp proof membrane in a wall.

Product Information:

- Colour: Black

- Width: 600mm

- Sold in 30 metre rolls

DPC Damp Proof Course - 900mm x 30 metres

For creating a damp proof membrane in a wall.

Product Information:

- Colour: Black

- Width: 900mm

- Sold in 30 metre rolls

Timco Double Sided Damp Proof Membrane Jointing Tape - 50mm x 10mtr

A high performance double sided butyl tape used for bonding DPMs. Use with TIMco High Strength PVC Builders Tape to provide a continuous damp proof seal between two sheets, where joints cannot be avoided.

Product Information:

- High adhesion

- Backing paper for easy application

Ultracure Damp Proofing Cream - 380ml

Damcor Insulated DPC Damp Proof Course - 165mm x 10 metres

The Insulated DPC has been developed to close off cavities around window and door openings and is intended to be used in conjunction with a return block. The Insulated DPC will also help to eliminate cold bridging around openings

Product Information:

- Type: Insulated

- Colour: Black

- Width: 165mm

- Thickness: 17mm

- Sold in 10 metre rolls

Expansion Joint Filler - 100mm x 10 Metres

Polyethylene foam expansion joint filler, undercut and perforated to form a near mastic joint.

A white-coloured, closed-cell, non-cross-linked, polyethylene, low-resistance joint filler for use in brick and blockwork.

Product Information:

- Lightweight

- Easy to store and handle

- Quickly and easily cut on-site

- Closed cells stop the absorption of water

- Weather, alkali and acid resistant

- Low load transfer