Wall Ties & Wall Starters

Frame Ties - 100mm x 50mm

When fixing windows, door frames etc. to masonry, the frame tie provides enhanced mortar keying and reduces the risk of injury from sharp edges.

Note: Frame tie should be fully embedded into mortar.

130mm Long Screw In Wall Tie Stainless Steel With Nylon Wall Plug

Screw in wall ties 130mm stainless steel includes nylon wall plug.

Product information:

- Plastic wall plug included.

- For use when building new brick or block walls directly from existing brickwork.

- Not to be used as a cross cavity wall tie.

- Length: 130mm.

150mm Frame Cramp Wall Tie

Frame cramp for restraining masonry to new or existing structures and for building in non-structural elements (frames etc).

Product Information:

Material - Manufactured from grade 304 stainless steel.

Behaviour in relation to fire - Non combustable (as defined in the national Building  Regulations).

Durability - Excellent corrosion resistance and a service life of not less than 60 years.

Frame Ties - 150mm x 50mm

When fixing windows, door frames etc. to masonry, the frame tie provides enhanced mortar keying and reduces the risk of injury from sharp edges.

Note: Frame tie should be fully embedded into mortar.

180mm Long Screw In Wall Tie Stainless Steel With Nylon Wall Plug

Screw in wall ties 130mm stainless steel includes nylon wall plug.

Product information:

- Plastic wall plug included.

- For use when building new brick or block walls directly from existing brickwork.

- Not to be used as a cross cavity wall tie.

- Length: 180mm.

200mm Frame Cramp Wall Tie

Frame cramp for restraining masonry to new or existing structures and for building in non-structural elements (frames etc).

Product Information:

Material - Manufactured from grade 304 stainless steel.

Behaviour in relation to fire - Non combustable (as defined in the national Building  Regulations).

Durability - Excellent corrosion resistance and a service life of not less than 60 years.

Frame Ties - 200mm x 50mm

When fixing windows, door frames etc. to masonry, the frame tie provides enhanced mortar keying and reduces the risk of injury from sharp edges.

Note: Frame tie should be fully embedded into mortar.

225mm Type 4 Housing Wall Tie Stainless Steel (Box of 250)

Product information:

- Will accept insulation retaining discs / clips.

- Wall tie with a multi drip feature which prevents moisture travelling across the cavity.

- The tie can be installed either way up.

- Length: 225mm.

- Quantity: Box of 250.

250mm Type 4 Housing Wall Tie Stainless Steel (Box of 250)

Product information:

- Will accept insulation retaining discs / clips.

- Wall tie with a multi drip feature which prevents moisture travelling across the cavity.

- The tie can be installed either way up.

- Length: 250mm.

- Quantity: Box of 250.

275mm Type 4 Housing Wall Tie Stainless Steel (Box of 250)

Product information:

- Will accept insulation retaining discs / clips.

- Wall tie with a multi drip feature which prevents moisture travelling across the cavity.

- The tie can be installed either way up.

- Length: 250mm.

- Quantity: Box of 250.

300mm V26 Type 2 Double Triangle Wall Ties - Box of 250

Traditional Double Triangle, general-purpose wall tie used in small commercial buildings and domestic properties. Suitable for buildings with a maximum height of 15m and cavity widths from 0-150mm.

Product Information:

Application - Type 2 - A general-purpose wall tie for applications such as small commercial buildings and domestic properties. They are suitable for buildings with a maximum height if 15m and for flat sites where the basic wind speed is up to 31m/s and altitude is not greater than 150m above sea level. Type 3 - As Type 2 but where the basic wind speed does not exceed 27m/s.

Design - Traditional Double Triangle wall tie previously to BS1243. Multidrip feature to prevent moisture travelling across the cavity. Design means the tie can be installed either way up.

Material - Manufactured from grade 304 stainless steel.

Behaviour in relation to fire - Non combustable (as defined in the national Building  Regulations).

Durability - Excellent corrosion resistance and a service life of not less than 60 years.

Compliance - Tested as Type B (sound) and as Type 2 & 3* (strength) to BS EN 845-1.

50mm Cavity Timber Frame Tie

Stainless steel masonry-timber tie for domestic and small commercial buildings up to four storeys high. Suitable for buildings with a maximum height of 15m and cavity widths from 50-100mm. Designed to accommodate vertical movement.

Product Information:

Application - This type of timber frame wall tie is right for domestic and small commercial builds up to four storeys high. They are suitable for buildings with a maximum height of 15m and for flat sites where the basic wind speed is up to 25m/s and altitude is not greater than 150m above sea level.

Design - Masonry-timber tie for timber frame buildings that accommodates vertical movement.

Material - Manufactured from grade 304 stainless steel.

Behaviour in relation to fire - Non combustable (as defined in the national Building  Regulations).

Durability - Excellent corrosion resistance and a service life of not less than 60 years.

Thermal Performance - In situations where thermal losses through ties need to be taken into account, the products will adequately resist thermal transmittance through a wall cavity

Compliance - Tested as Type B (sound) and as Type 6 (strength) to BS EN 845-1

75mm Cavity Timber Frame Tie

Stainless steel masonry-timber tie for domestic and small commercial buildings up to four storeys high. Suitable for buildings with a maximum height of 15m and cavity widths from 50-100mm. Designed to accommodate vertical movement.

Product Information:

Application - This type of timber frame wall tie is right for domestic and small commercial builds up to four storeys high. They are suitable for buildings with a maximum height of 15m and for flat sites where the basic wind speed is up to 25m/s and altitude is not greater than 150m above sea level.

Design - Masonry-timber tie for timber frame buildings that accommodates vertical movement.

Material - Manufactured from grade 304 stainless steel.

Behaviour in relation to fire - Non combustable (as defined in the national Building  Regulations).

Durability - Excellent corrosion resistance and a service life of not less than 60 years.

Thermal Performance - In situations where thermal losses through ties need to be taken into account, the products will adequately resist thermal transmittance through a wall cavity

Compliance - Tested as Type B (sound) and as Type 6 (strength) to BS EN 845-1

Simpsons Crocodile Stainless Steel Wallstarter CWS

The UK’s most popular solution to the tying-in of new walls to existing masonry walls/columns. The only system with “snap out” ties which can be positioned anywhere along the channel for a universal fit.

The C2K Crocodile Wall Starter is a quality engineered wall connector system that has been developed for use with most brick and block modules. This system has been designed for multi-purpose use where reliability and durability are important requirements. It provides lateral support to masonry wall panels in conversion, extension and new building work.

- BBA Approved for up to 8m, 3 storey work.

- Accommodates 10mm of vertical movement.

- Adjustable anchor ties to accommodate variation in brick courses.

- All fixings and ties provided within the packs.

The multi-purpose ‘no flange profile’ that has been designed to cater for brick and block walls of widths from 60 to 250mm. Ideal for internal and external applications where both sides of the new wall are to be fair faced.

65mm Insulation Retaining Clips (Bag 250)

Product information:

- Holds insulation in position against the inner leaf of a cavity wall.

- Compatible with VE4 housing wall ties.

- Colour supplied may vary

- Diameter: 65mm.

- Quantity: Bag of 250.