Universal Dry Fix Ridge Kit
The universal dry fix ridge kit is a simple system to secure ridge tiles on a dual pitched roof while removing the need for sand cement mortar by using clamps, screws, and unions to give a safe and improved speed of installation with protection from wind up-lift and rain penetration.
The kit complies with BS8612 and provides 5,000mm²/m ventilation to the roof void which is the equivalent to a continuous 5mm gap, to meet requirements of BS5250. The system is compatible with most makes of round and angled ridge tiles along with low & high profile tiles and slates. Each universal dry fix ridge kit contains all mechanical fixings required for a ridge run approximately 6 metres in length.
Product Information:
- Complies with BS8612 Dryfixed system specification
- 6m kit that is easy to use & handle
- 5000mm²/m ridge ventilation to meet requirements of BS 5250
- Complies with mechanical fixing requirements of BS 5534
- Universal ridge tile joint unions to provide a mortar free finish
- Ridge batten wrap style fixing brackets
- Stainless-steel fixings screws and clamping plates
- Highly durable – UV stable and water resistant
- Suitable for new build and refurbishment projects
- Additional dry fix hip support trays and tiles clips available as required
Ridge Kit Contents:
- 1 x Vent Roll (300mm x 6m) with black edge trim to upper surface
- 13 x Ridge to ridge joint unions and 26x clips
- 13 x Stainless steel 100mm screws and clamping plates
- 10 x Ridge batten fixing brackets
