Twinwall Pipe & Fittings

Miflues Finishing Plate 30º-45º - Ø 125

The Finishing Plate comes in two parts and is used to tidy the area around the flue as it passes through a non-combustible wall. This plate is attached to the wall where the flue is passing through between 45° and 60°. Use silicone and screws to secure against the wall.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues Heavy Duty Roof Support - Ø125

The Heavy duty roof Support will rotate on 2 screws so that the flue can be installed vertically through the roof. The Roof Support is attached to the rafters in the roof space, allowing a fixed support before the Flue leaves the structure of the building. The larger plates offer more support than the standard -067 roof support.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues Round Fixed Finishing Plate 45º - Ø 125 - 2pc

The Round Finishing Plate comes in two parts and is used to tidy the area around the flue as it passes through a non-combustible wall. This plate is attached to the wall where the flue is passing through at fixed 45°. Use silicone and screws to secure against the wall. 75mm wide.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues Single Wall to Twin Wall Adaptor - Ø125

Universal adaptor to connect the appliance outlet to the TWPro, can also connect single wall connecting flue or vitreous enamel to TWPro. This has a tapered design to allow a smooth transition from single wall to twin wall.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues 135º Tee - Ø125

The 135° Tee is used when you need a cleaning access at the base of the chimney. It is the first piece installed on the external wall and allows for ease cleaning of the flue. The 135° Tee is shaped in such away that it does not restrict the flue gases.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues 45º Bend - Ø125

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues Adjustable Base Support - Ø125

Adjustable Base Supports are used internally or externally to provide vertical support to the chimney. This support has a small levelling adjustment of 50mm to 80mm from the wall surface. Only recommended fixings should be used to fit this base support to the building surface.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro - Adjustable Connecting Pipe 500mm - 125 Ø

500m pipe with an exposed telescopic connecting pipe built into the male end. This has a cover band and insulation to cover the connecting pipe. This can be used to connect directly on to a heating appliance and allows a clean streamlined finish to a stove installation. The disconnector section allows for easy removal of the appliance.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues Ø125 Twinwall Pipe - 500mm

Rigid fixed 500mm pipe effective installed length of 465mm.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues Roof Support - Ø 125

The Roof Support will rotate on 2 screws so that the flue can be installed vertically through the roof. The Roof Support is attached to the rafters in the roof space, allowing a fixed support before the Flue leaves the structure of the building.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues Tee Cap - Ø125

Used to cap off the bottom or unused end of a 90/135 tee, this is usually fitted to the bottom of a base support to allow easy removal for sweeping and access.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues Wall Support 130mm-210mm - Ø 125

Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 130mm (minimum) and 210mm (maximum) adjustment from the wall surface allowing a 80mm adjustment. This wall support has to be manually cut down to achieve the desired effective length.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues Wall Support 210mm-420mm - Ø 125

Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 80mm (minimum) and 420mm (maximum) adjustment from the wall surface allowing a 340mm adjustment. This wall support has to be manually cut down to achieve the desired effective length.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues Wall Support 50mm-80mm - Ø 125

Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 50mm (minimum) and 80mm (maximum) adjustment from the wall surface allowing a 30mm adjustment.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Chest Mounting Plate - Ø 125

Transitional plate that converts MI-FLEX flue liner to TWPro, the component is designed to be fixed onto the top of a lowered chimney stack. Please note the transition from flex to TWpro must be made in side the existing class 1 chimney stack.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Retro Fit Base Support - Ø 125

The Retrofit base support is adjustable from 0mm to 120mm from the wall, it can be used in conjunction with 90° or 135° tees when fitted directly above. This item can also be used as a load bearing intermediate support on longer flue runs and can be retro fitted to make installation simpler. One support to be used on most standard single story or 2 storey homes, supporting up to 10m of chimney immediately above the tee. Only recommended fixings should be used.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - 2pc. Round Fixed Finishing Plate (150) 45º - Ø 125

The Round Finishing Plate comes in two parts and is used to tidy the area around the flue as it passes through a non-combustible wall. This plate is attached to the wall where the flue is passing through at fixed 45°. Use silicone and screws to secure against the wall. 150mm wide

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Single Wall to Twin Wall Adaptor - Ø 125

Universal adaptor to connect the appliance outlet to the TWPro, can also connect single wall connecting flue or vitreous enamel to TWPro. This has a tapered design to allow a smooth transition from single wall to twin wall.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - 135º Tee - Ø 125

The 135° Tee is used when you need a cleaning access at the base of the chimney. It is the first piece installed on the external wall and allows for easy cleaning of the flue. The 135° Tee is shaped in such a way that it does not restrict the flue gases.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - 45º Bend - Ø 125

2 segment 45° Bend

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Adjustable Base Support - Ø 125

Adjustable Base Supports are used internally or externally to provide vertical support to the chimney. This support has a small levelling adjustment of 50mm to 80mm from the wall surface. Only recommended fixings should be used to fit this base support to the building surface.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Adjustable Pipe 350-500mm - Ø 125

Adjustable Length extends from 350mm to 500mm. This item comes with a FREE Locking Band. The adjustable length has been packed to its minimum length with the central locking band plus the additional insulation. IT IS VERY IMPORTANT THAT THE ADDITIONAL INSULATION (SUPPLIED) IS USED TO TOTALLY FILL THE VOID LEFT BETWEEN THE TWO PIPE SECTIONS.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Adjustable Pipe 500-880mm - Ø 125

Two piece adjustable length with an adjustment range of 500mm to 880mm. The Pipe comes with a body soluble ceramic blanket that is cut down to achieve the desired effective length, secured with a locking band to fix the pipe in place. No screws required.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Anti-wind Cowl - Ø 125

The Anti-Wind terminal has a rain cap at its core with an outer cover to give ultimate rain and wind protection.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Pipe 1000mm - Ø 125

Rigid fixed 1000mm pipe effective installed length of 965mm.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Pipe 250mm - Ø 125

Rigid fixed 250mm pipe effective installed length of 215mm.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Pipe 500mm - Ø 125

Rigid fixed 500mm pipe effective installed length of 465mm.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Pipe 800mm - Ø 125

Rigid fixed 800mm pipe effective installed length of 765mm

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Rain Cap with Mesh - Ø 125

Standard rain cap terminal with added 25mm square wire mesh to stop birds or vermin entering and blocking the flue way. Suitable for all fuel except gas.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Tee Cap - Ø 125

Used to cap off the bottom or unused end of a 90/135 Tee, this is usually fitted to the bottom of a base support to allow easy removal for sweeping and access.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Testing Flat Adaptor to SW - 125 Ø

Flat adaptor with test point and cap built in, this allows a safe convenient entry point into the flue way for testing gas and draft samples. Please note 3rd party test point may invalidate the warranty.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Wall Support 130-210mm - Ø 125

Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 130mm (minimum) and 210mm (maximum) adjustment from the wall surface allowing a 80mm adjustment. This wall support has to be manually cut down to achieve the desired effective length.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Wall Support 210mm-420mm - Ø 125

Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 80mm (minimum) and 420mm (maximum) adjustment from the wall surface allowing a 340mm adjustment. This wall support has to be manually cut down to achieve the desired effective length.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Wall Support 50-80mm - Ø 125

Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 50mm (minimum) and 80mm (maximum) adjustment from the wall surface allowing a 30mm adjustment.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues Firestop Cover Plate (WHITE) - Ø 125

The Firestop Cover Plate is used to cover an existing Firestop Plate. It gives the installation a pleasing finish, while still allowing enough air into the chamber without compromising the use of the Firestop Plate. It is attached to the underside of the Firestop Plate using magnets and spacers. It is important to use these spacers to allow the correct amount of air into the chamber.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro - Adjustable Connecting Pipe 1000mm - 125 Ø

1000m pipe with an exposed telescopic connecting pipe built into the male end. This has a cover band and insulation to cover the connecting pipe. This can be used to connect directly on to a heating appliance and allows a clean streamlined finish to a stove installation. The disconnecter section allows for easy removal of the appliance.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues Ø125 Adjustable Twinwall Pipe - 350mm to 500mm

Two piece adjustable length with an adjustment range of 350mm to 500mm. The Pipe comes with a body soluble ceramic blanket that is cut down to achieve the desired effective length, secured with a locking band to fix the pipe in place. No screws required.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues Anti-wind Cowl - Ø 125

The Anti-Wind terminal has a rain cap at its core with an outer cover to give ultimate rain and wind protection.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro - Connecting Pipe Starter Length 1000mm - Ø 125

1000mm pipe with a rebated slip joint at the bottom that allows a connecting pipe to slide inside the main pipe allowing adjustment of up to 200mm. This allows pre installation of the chimney system and allows for safe disconnection of the appliance without disturbing the TWPro.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues Ø125 Twinwall Pipe - 1000mm

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues Ø125 Twinwall Pipe - 250mm

Rigid fixed 250mm pipe effective installed length of 215mm.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues Ø125 Twinwall Pipe - 800mm

Rigid fixed 800mm pipe effective installed length of 765mm

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues Rain Cap with Mesh - Ø125

Standard rain cap terminal with added 25mm square wire mesh to stop birds or vermin entering and blocking the flue way. Suitable for all fuel except gas.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro - Testing Flat Adaptor to SW - 125 Ø

Flat adaptor with test point and cap built in, this allows a safe convenient entry point into the flue way for testing gas and draft samples.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues Ventilated Firestop Plate (WHITE) Ø 125

A ventilated firestop plate (T600) can be used on installations burning all fuels. All TWPro fire stops are set at a 50mm to combustible distance.

Product Information:

A Firestop plate is used to allow the chimney to pass between floors, for example, when you need the chimney to go through the ceiling on the ground floor through to the first floor. The steel plate is designed to provide the appropriate distance between the flue and the adjacent flammable materials, according to both fire and building regulations. A plate must be used top and bottom of the floor penetration.

A ventilated firestop plate (T600) can be used on installations burning all fuels. All TWPro fire stops are set at a 50mm to combustible distance.

TWPro is HETAS Approved and is CE marked. Designation Number is EN1856-1 T600 N1 W V2 L50040 G50. EN1856-1 T200 P1 W V2 L50040 O20.

Miflues TWPro MB - Chest Mounting Plate - Ø 150

Transitional plate that converts MI-FLEX flue liner to TWPro, the component is designed to be fixed onto the top of a lowered chimney stack. Please note the transition from flex to TWpro must be made in side the existing class 1 chimney stack.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Single Wall to Twin Wall Adaptor - Ø 150

Universal adaptor to connect the appliance outlet to the TWPro, can also connect single wall connecting flue or vitreous enamel to TWPro. This has a tapered design to allow a smooth transition from single wall to twin wall.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - 135º Tee - Ø 150

The 135° Tee is used when you need a cleaning access at the base of the chimney. It is the first piece installed on the external wall and allows for easy cleaning of the flue. The 135° Tee is shaped in such a way that it does not restrict the flue gases.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - 45º Bend - Ø 150

2 segment 45° Bend

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Adjustable Base Support - Ø 150

Adjustable Base Supports are used internally or externally to provide vertical support to the chimney. This support has a small levelling adjustment of 50mm to 80mm from the wall surface. Only recommended fixings should be used to fit this base support to the building surface.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Anti-wind Cowl - Ø 150

The Anti-Wind terminal has a rain cap at its core with an outer cover to give ultimate rain and wind protection.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Pipe 1000mm - Ø 150

Rigid fixed 1000mm pipe effective installed length of 965mm.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Pipe 250mm - Ø 150

Rigid fixed 250mm pipe effective installed length of 215mm.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Pipe 500mm - Ø 150

Rigid fixed 500mm pipe effective installed length of 465mm.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Pipe 800mm - Ø 150

Rigid fixed 800mm pipe effective installed length of 765mm

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Rain Cap with Mesh - Ø 150

Standard rain cap terminal with added 25mm square wire mesh to stop birds or vermin entering and blocking the flue way. Suitable for all fuel except gas.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Tee Cap - Ø 150

Used to cap off the bottom or unused end of a 90/135 Tee, this is usually fitted to the bottom of a base support to allow easy removal for sweeping and access.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Testing Flat Adaptor to SW - 150 Ø

Flat adaptor with test point and cap built in, this allows a safe convenient entry point into the flue way for testing gas and draft samples. Please note 3rd party test point may invalidate the warranty.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Wall Support 130-210mm - Ø 150

Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 130mm (minimum) and 210mm (maximum) adjustment from the wall surface allowing a 80mm adjustment. This wall support has to be manually cut down to achieve the desired effective length.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Wall Support 210-420mm - Ø 150

Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 80mm (minimum) and 420mm (maximum) adjustment from the wall surface allowing a 340mm adjustment. This wall support has to be manually cut down to achieve the desired effective length.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Wall Support 50-80mm - Ø 150

Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 50mm (minimum) and 80mm (maximum) adjustment from the wall surface allowing a 30mm adjustment.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues Firestop Cover Plate (WHITE) - Ø 150

The Firestop Cover Plate is used to cover an existing Firestop Plate. It gives the installation a pleasing finish, while still allowing enough air into the chamber without compromising the use of the Firestop Plate. It is attached to the underside of the Firestop Plate using magnets and spacers. It is important to use these spacers to allow the correct amount of air into the chamber.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues Heavy Duty Roof Support - Ø150

The Heavy duty roof Support will rotate on 2 screws so that the flue can be installed vertically through the roof. The Roof Support is attached to the rafters in the roof space, allowing a fixed support before the Flue leaves the structure of the building. The larger plates offer more support than the standard -067 roof support. See loading data in guides.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues Single Wall to Twin Wall Adaptor - Ø150

Universal adaptor to connect the appliance outlet to the TWPro, can also connect single wall connecting flue or vitreous enamel to TWPro. This has a tapered design to allow a smooth transition from single wall to twin wall.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues 135º Tee - Ø150

The 135° Tee is used when you need a cleaning access at the base of the chimney. It is the first piece installed on the external wall and allows for ease cleaning of the flue. The 135° Tee is shaped in such away that it does not restrict the flue gases.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues Finishing Plate 30º-45º - Ø 150

The Finishing Plate comes in two parts and is used to tidy the area around the flue as it passes through a non-combustible wall. This plate is attached to the wall where the flue is passing through between 45° and 60°. Use silicone and screws to secure against the wall.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues 45º Bend - Ø150

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues Adjustable Base Support - Ø150

Adjustable Base Supports are used internally or externally to provide vertical support to the chimney. This support has a small levelling adjustment of 50mm to 80mm from the wall surface. Only recommended fixings should be used to fit this base support to the building surface.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues Anti-wind Cowl - Ø 150

The Anti-Wind terminal has a rain cap at its core with an outer cover to give ultimate rain and wind protection.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues Ø150 Twinwall Pipe - 1000mm

Rigid fixed 1000mm pipe effective installed length of 965mm.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues Ø150 Twinwall Pipe - 250mm

Rigid fixed 250mm pipe effective installed length of 215mm

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues Ø150 Twinwall Pipe - 500mm

Rigid fixed 500mm pipe effective installed length of 465mm.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues Ø150 Twinwall Pipe - 800mm

Rigid fixed 800mm pipe effective installed length of 765mm

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues Rain Cap with Mesh - Ø150

Standard rain cap terminal with added 25mm square wire mesh to stop birds or vermin entering and blocking the flue way. Suitable for all fuel except gas.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues Roof Support - Ø 150

The Roof Support will rotate on 2 screws so that the flue can be installed vertically through the roof. The Roof Support is attached to the rafters in the roof space, allowing a fixed support before the Flue leaves the structure of the building.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues Tee Cap - Ø150

Used to cap off the bottom or unused end of a 90/135 tee, this is usually fitted to the bottom of a base support to allow easy removal for sweeping and access.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro - Testing Flat Adaptor to SW - 150 Ø

Flat adaptor with test point and cap built in, this allows a safe convenient entry point into the flue way for testing gas and draft samples.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues Ventilated Firestop Plate (WHITE) Ø 150

A ventilated firestop plate (T600) can be used on installations burning all fuels. All TWPro fire stops are set at a 50mm to combustible distance.

Product Information:

A Firestop plate is used to allow the chimney to pass between floors, for example, when you need the chimney to go through the ceiling on the ground floor through to the first floor. The steel plate is designed to provide the appropriate distance between the flue and the adjacent flammable materials, according to both fire and building regulations. A plate must be used top and bottom of the floor penetration.

A ventilated firestop plate (T600) can be used on installations burning all fuels. All TWPro fire stops are set at a 50mm to combustible distance.

TWPro is HETAS Approved and is CE marked. Designation Number is EN1856-1 T600 N1 W V2 L50040 G50. EN1856-1 T200 P1 W V2 L50040 O20.

Miflues Wall Support 130mm-210mm - Ø 150

Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 130mm (minimum) and 210mm (maximum) adjustment from the wall surface allowing a 80mm adjustment. This wall support has to be manually cut down to achieve the desired effective length.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues Wall Support 210mm-420mm - Ø 150

Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 80mm (minimum) and 420mm (maximum) adjustment from the wall surface allowing a 340mm adjustment. This wall support has to be manually cut down to achieve the desired effective length.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues Wall Support 50mm-80mm - Ø 150

Wall support are to be used for lateral support only and should be use a minimum of every 3 metres. Only recommended fixings should be used to fit the wall support to the building surface. This wall band allows you to set a distance of 50mm (minimum) and 80mm (maximum) adjustment from the wall surface allowing a 30mm adjustment.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Storm Collar - Ø 125

Used to ensure water tightness in the passage through the roof. It also protects the flashing from extreme weather conditions. It should be installed about 25mm above the tallest part of the flashing. Once secure run a bead of silicone around the top edge and the flue to complete the water-tightness..

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Storm Collar - Ø 150

Used to ensure water tightness in the passage through the roof. It also protects the flashing from extreme weather conditions. It should be installed about 25mm above the tallest part of the flashing. Once secure run a bead of silicone around the top edge and the flue to complete the water-tightness.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Structural Locking Band - Ø 125

The Structural Locking Band replaces the standard locking band where an unsupported length of up to 2.9 metres is required. These should be used on each joint above and the joint below the final wall support.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Structural Locking Band - Ø 150

The Structural Locking Band replaces the standard locking band where an unsupported length of up to 2.9 metres is required. These should be used on each joint above and the joint below the final wall support.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues Storm Collar - Ø 125

Used to ensure water tightness in the passage through the roof. It also protects the flashing from extreme weather conditions. It should be installed about 25mm above the tallest part of the flashing. Once secure run a bead of silicone around the top edge and the flue to complete the water-tightness.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues Storm Collar - Ø 150

Used to ensure water tightness in the passage through the roof. It also protects the flashing from extreme weather conditions. It should be installed about 25mm above the tallest part of the flashing. Once secure run a bead of silicone around the top edge and the flue to complete the water-tightness.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro - Structural Locking Band - 125 Ø

The Structural Locking Band replaces the standard locking band where an unsupported length of up to 2.9 metres is required. These should be used on each joint above and the joint below the final wall support.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro - Structural Locking Band - 150 Ø

The Structural Locking Band replaces the standard locking band where an unsupported length of up to 2.9 metres is required. These should be used on each joint above and the joint below the final wall support.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm.

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Finishing Plate 0º-30º - Ø 125

The Finishing Plate comes in two parts and is used to tidy the area around the flue as it passes through a non-combustible wall. This plate is attached to the wall where the flue is passing through between 90° and 60°. Use silicone and screws to secure against the wall.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Finishing Plate 30º-45º - Ø 125

The Finishing Plate comes in two parts and is used to tidy the area around the flue as it passes through a non-combustible wall. This plate is attached to the wall where the flue is passing through between 45° and 60°. Use silicone and screws to secure against the wall.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Solid Firestop Plate - Ø 125

A Non-Ventilated Firestop plate can only be used on installations burning gas or oil. All TWPro fire stops are set at a 50mm to combustible distance.

Product Information:

A Firestop plate is used to allow the chimney to pass between floors, for example, when you need the chimney to go through the ceiling on the ground floor through to the first floor. The steel plate is designed to provide the appropriate distance between the flue and the adjacent flammable materials, according to both fire and building regulations. A plate must be used top and bottom of the floor penetration.

For use on solid fuel and gas/oil appliances. All TWPro fire stops are set at a 50mm to combustible distance.

TWPro is HETAS Approved and is CE marked. Designation Number is EN1856-1 T600 N1 W V2 L50040 G50. EN1856-1 T200 P1 W V2 L50040 O20.

Miflues TWPro MB - Flat Adaptor - Ø 125

Universal adaptor to connect the appliance outlet to the TWPro, can also connect single wall connecting flue or vitreous enamel to TWPro. This has a flat design to give an instant transition from the appliance or connecting flue to TWPro in the shortest length

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, gas boiler and any solid fuel appliances

CONSTRUCTION: Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³. All parts are fully welded.. Distance to combustibles is 50mm

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number is. EN1856-1 T600 N1 W V2 L50040 G50.. EN1856-1 T200 P1 W V2 L50040 O20

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied).. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board)

Miflues TWPro MB - Guy Wire Bracket - Ø 125

This component is used to secure unsupported chimney sections above 1.5m of the roof level, an extra 1.5m can be achieved in conjunction with the guy wire kit.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Heavy Duty Roof Support - Ø 125

TWPro MB - Heavy Duty Roof Support - Ø 125

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Roof Brace Kit - Ø 125

A Roof Brace Kit can be used whenever there is a need to stabilise the chimney above the roof level. The roof brace kit must be used if the chimney extends 1.5 + metres above the roof. The arms can be adjusted from 1.5 metres to 2.3 metres in length.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - Roof Support - Ø 125

The Roof Support will rotate on 2 screws so that the flue can be installed vertically through the roof. The Roof Support is attached to the rafters in the roof space, allowing a fixed support before the Flue leaves the structure of the building. See loading data in guides.

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - 2pc. Round Fixed Finishing Plate 45º - Ø 125

The Round Finishing Plate comes in two parts and is used to tidy the area around the flue as it passes through a non-combustible wall. This plate is attached to the wall where the flue is passing through at fixed 45°. Use silicone and screws to secure against the wall. 75mm wide

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - 2pc. Round Fixed Finishing Plate 90º - Ø 125

The Round Finishing Plate comes in two parts and is used to tidy the area around the flue as it passes through a non-combustible wall. This plate is attached to the wall where the flue is passing through at fixed 90°. Use silicone and screws to secure against the wall. 75mm wide

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).

Miflues TWPro MB - 2pc. Round Fixed Finishing Plate (150) 90º - Ø 125

The Round Finishing Plate comes in two parts and is used to tidy the area around the flue as it passes through a non-combustible wall. This plate is attached to the wall where the flue is passing through at fixed 90°. Use silicone and screws to secure against the wall. 150mm wide

Product Information:

APPLICATION: For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION: Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m³ TWPro / 128Kg/m3. All parts are fully welded.. Distance to combustibles is 50mm TWPro 60mm on KC

APPROVALS: TWPro is HETAS Approved and is CE marked.. Designation Number . TWPro EN1856-1 T600 N1 W V2 L50040 G50.. TWPro EN1856-1 T200 W V2 L50040 O20. . KC EN1856-1 T600 N1 W V2 L50040 G60.. KC EN1856-1 T200 W V2 L50040 O20.

INSTALLATION: TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.. Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).