Timber Construction Screws

Velocity Premium Multi Purpose Screw - 600 Pieces

Contents:

- 4.0 x 30mm (Qty 140)

- 4.0 x 40mm (Qty 100)

- 4.0 x 50mm (Qty 70)

- 4.0 x 60mm (Qty 60)

- 5.0 x 40mm (Qty 80)

- 5.0 x 50mm (Qty 55)

- 5.0 x 60mm (Qty 45)

- 5.0 x 70mm (Qty 30)

- 5.0 x 80mm (Qty 20)

- 25mm Driver Bit (Qty 1)

Product Information:

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications.

- Dual angle thread designed for superior hold

- Partially threaded stops the timber jacking. (NOTE: Partially threaded from 40mm)

- Rapid drive twist cut enhances drive performance

- Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. (NOTE: Slash point from 25mm and above)

3 x 16mm Velocity Premium Multi Purpose Screw (Pack of 200)

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications.

Product Information:

- Dual angle thread designed for superior hold

- Rapid drive twist cut enhances drive performance

Classic Multi-Purpose Screws - PZ - Double Countersunk - A2 Stainless Steel - 4 x 30mm

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

Product Information:

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

4.5 x 50mm Decking Screw (Box of 250)

This decking screw uses the C2 twin-cut technology.

Coated with a multi-layer patented corrosion resistant plating to withstand up to 1,000 hours in a salt spray cabinet.

This new and innovative designed screw enables the screw to rapidly penetrate into the timber, cleanly countersink, and securely clamp the decking board firmly to the joists.

Product Information:

- Strengthened head to prevent shearing when using an impact tool,

- Ribs under the head to improve countersinking,

- Helix shank for removing debris and to benefit clamping,

- Coated with a patented multi-layer corrosion resistant plating which withstands up to 1,000 hours salt spray,

- Patented twin cut technology for rapid "pick-up" which reduces timber splitting.

3x20mm Velocity Premium Multi Purpose Screw (Pack of 200)

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications.

Product Information:

- Dual angle thread designed for superior hold

- Rapid drive twist cut enhances drive performance

Classic Multi-Purpose Screws - PZ - Double Countersunk - A2 Stainless Steel - 4 x 40mm

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

Product Information:

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

4.5 x 65mm Decking Screw (Tub of 1000)

This decking screw uses the C2 twin-cut technology.

Coated with a multi-layer patented corrosion resistant plating to withstand up to 1,000 hours in a salt spray cabinet.

This new and innovative designed screw enables the screw to rapidly penetrate into the timber, cleanly countersink, and securely clamp the decking board firmly to the joists.

Product Information:

- Strengthened head to prevent shearing when using an impact tool,

- Ribs under the head to improve countersinking,

- Helix shank for removing debris and to benefit clamping,

- Coated with a patented multi-layer corrosion resistant plating which withstands up to 1,000 hours salt spray,

- Patented twin cut technology for rapid "pick-up" which reduces timber splitting.

3.5x20mm Velocity Premium Multi Purpose Screw (Pack of 200)

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications.

Product Information:

- Dual angle thread designed for superior hold

- Rapid drive twist cut enhances drive performance

Classic Multi-Purpose Screws - PZ - Double Countersunk - A2 Stainless Steel - 4 x 50mm

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

Product Information:

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

4.5 x 65mm Decking Screw (Tub of 1000)

This decking screw uses the C2 twin-cut technology.

Coated with a multi-layer patented corrosion resistant plating to withstand up to 1,000 hours in a salt spray cabinet.

This new and innovative designed screw enables the screw to rapidly penetrate into the timber, cleanly countersink, and securely clamp the decking board firmly to the joists.

Product Information:

- Strengthened head to prevent shearing when using an impact tool,

- Ribs under the head to improve countersinking,

- Helix shank for removing debris and to benefit clamping,

- Coated with a patented multi-layer corrosion resistant plating which withstands up to 1,000 hours salt spray,

- Patented twin cut technology for rapid "pick-up" which reduces timber splitting.

3.5 x 25mm Velocity Premium Multi Purpose Screw (Pack of 200)

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications.

Product Information:

- Dual angle thread designed for superior hold

- Rapid drive twist cut enhances drive performance

- Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque.

Classic Multi-Purpose Screws - PZ - Double Countersunk - A2 Stainless Steel - 4 x 60mm

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

Product Information:

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

4.5 x 75mm Decking Screw (Box of 250)

This decking screw uses the C2 twin-cut technology.

Coated with a multi-layer patented corrosion resistant plating to withstand up to 1,000 hours in a salt spray cabinet.

This new and innovative designed screw enables the screw to rapidly penetrate into the timber, cleanly countersink, and securely clamp the decking board firmly to the joists.

Product Information:

- Strengthened head to prevent shearing when using an impact tool,

- Ribs under the head to improve countersinking,

- Helix shank for removing debris and to benefit clamping,

- Coated with a patented multi-layer corrosion resistant plating which withstands up to 1,000 hours salt spray,

- Patented twin cut technology for rapid "pick-up" which reduces timber splitting.

3.5 x 30mm Velocity Premium Multi Purpose Screw (Pack of 200)

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications.

Product Information:

- Dual angle thread designed for superior hold

- Rapid drive twist cut enhances drive performance

- Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque.

Classic Multi-Purpose Screws - PZ - Double Countersunk - A2 Stainless Steel - 4 x 70mm

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

Product Information:

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Timber Screws - Hex - Exterior - Mixed Grab Pack - Green - 165 Pieces

Contents:

- 6.7 x 75 (Qty 30)

- 6.7 x 87 (Qty 45)

- 6.7 x 100 (Qty 35)

- 6.7 x 125 (Qty 35)

- 6.7 x 150 (Qty 20)

- 8mm Socket Driver Bit (Qty 1)

Product Information:

A selection of popular exterior hex head landscaping screw sizes in a handy and reusable storage pack with clip-shut lid.

- Hex head countersunk with a fixed washer

- Long lasting plating withstands up to 1,000 hours salt spray resistance in accordance to BS EN 9227:2012

- Helix shank for removing debris and to improve clamping

- 50° deep single thread to provide a secure fixing with high pull-out resistance

- Finish: Exterior (Green Organic)

4.0 x 16mm Velocity Premium Multi Purpose Screw (Pack of 200)

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications.

Product Information:

- Dual angle thread designed for superior hold

- Rapid drive twist cut enhances drive performance

Classic Multi-Purpose Screws - PZ - Double Countersunk - A2 Stainless Steel - 5 x 40mm

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

Product Information:

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

4.0 x 20mm Velocity Premium Multi Purpose Screw (Pack of 200)

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications.

Product Information:

- Dual angle thread designed for superior hold

- Rapid drive twist cut enhances drive performance

Classic Multi-Purpose Screws - PZ - Double Countersunk - A2 Stainless Steel - 5 x 50mm

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

Product Information:

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length