Suffolk Latch - Black

38mm x 88mm Fencing Rail Treated UC3 Green - 3.6mtr

This timber is mainly used for fencing rails but has other suitable applications.

Product Information: Premium Quality!

- Country of origin: UK

- Species: Spruce

- Grade: Ungraded

- Surface finish: Sawn

- Colour: Green

- Treatment: UC3

- Size: 38mm x 88mm

- Length: 3.6 metre

Thunderbolt Masonry Fixing - Priced Per Bolt

Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone. It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications. The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt. Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.

Product Information:

- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust

- Remove any loose debris from the hole

- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action

- Tighten the Thunderbolt™ to secure the fixture firmly in place

Fence Post Caps Square Chamfered Treated Green

Square chamfered treated fence post cap for 100mm post.

Product Information:

- For 100mm fence post (125mm cap).

Boltdown Shoe - Hot Dipped Galvanised - 100mm

Bolt down fence post shoes are a quick and easy way to erect fencing and garden posts as they require no digging or concreting into place, saving time and money. Designed to be fixed down onto an existing concrete base or wall and are perfect for patio fencing, decking, pergolas or car ports. The bolt secure version features 2x 8mm carriage bolts that tighten and clamp the post firmly into the post holder section to prevent any post movement.

Product Information:

- Prevents against post rot and decay as it will hold the base of the post above ground level

- Hot dipped galvanised for maximum rust protection

- Can be painted over

Timco 100mm x 100mm Fence Post Cap - Galvanised

Fence post caps create the perfect decorative finish to the top of fence posts and also protect the top of the fence post from weather.

Product Information:

- Perfect decorative finish to the top of fence posts

- Protects the top of the fence post from weather damage

- Can be painted over to match with a different fence colour

- To suit post size (mm) - 100 x 100

O'Brien Post Mix 20kg Bag

O’Brien Cement Post Mix is a simple to use rapid setting concrete mix for fixing posts in the ground. It is pre-mixed and blended and contains cement, dried aggregates and admixtures. The cement used is O’Brien Cement manufactured in Ireland and conforms to I.S EN 197-1 2011.

Product Information:

1. 1. Dig a hole to required size for post, half fill the hole with water and place the post in the hole,
2. 2. Tip the pre-mixed aggregate uniformly into the hole around the post, until it is above the level of water,
3. 3. If any dry powder remains visible at this stage, add additional water until absorbed by the material,
4. 4. Adjust the post into position and support appropriately until material set occurs, which takes approximately 10 minutes.

Drive in Post Spike - Bolt Secure - Hot Dipped Galvanised - 100mm x 600mm

Drive in post spikes are a quick and easy way to erect fencing and garden posts as they require no digging or concreting into place, saving time and money. The bolt secure version features 2x 8mm carriage bolts that tighten and clamp the post firmly into the post holder section to prevent any post movement, as well as allowing for over / under sized post tolerance. Designed to allow for removal of the post at a later stage if required.

Product Information:

- Features a 4 fin steel spike to ensure a solid, permanent, wind resistant fit

- Prevents against post rot and decay as it will hold the base of the post above ground level

- Hot dipped galvanised for maximum rust protection

- Can be painted over

- Suitable for 4ft fencing

Bartoline Creocote Oil Based Wood Treatment

Bartoline Creocote is an oil-based wood treatment, effective when applied to exterior timbers. Its oil-based properties provide excellent surface water repellence, improve grain definition and restrict weather damage.

Application:

Rough cut exterior timbers such as garden sheds, fences and trellis work.

Coverage:

1 Litre will cover 6 – 8 square meters depending upon texture and porosity of the timber to be treated.

Product Information:

- Not recommended for use with plant life contact

- Not suitable for var nish or overpainting

- Storage: Containers should be stored out of direct sunlight in dry conditions away from sources of ignition

- Cleaning: Use white sp irit followed by detergent

Classic Multi-Purpose Screws - PZ - Double Countersunk - A2 Stainless Steel - 4 x 40mm

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipb oard, M DF and p lastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

Product Information:

- Double countersunk reduces the likelihood of head shear and assists completion of countersinking

- 40° deep single thread to provide a secure fixing with high pull-out resistance

- Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge

- All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Classic Multi-Purpose Screws - PZ - Double Countersunk - A2 Stainless Steel - 4 x 50mm

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipb oard, M DF and p lastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

Product Information:

- Double countersunk reduces the likelihood of head shear and assists completion of countersinking

- 40° deep single thread to provide a secure fixing with high pull-out resistance

- Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge

- All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length