Search
Inc VAT Prices Ex VAT Prices
Ex VAT Prices
All Categories
    Menu Close

    Straps & Struts

    Restraint straps and Struts suitable for providing stability and support to structures.

    View as Grid List
    Sort by
    Display per page
    Picture of Simpsons Herringbone Joist Strut - 400mm

    Simpsons Herringbone Joist Strut - 400mm

    HSA400

    Herringbone Joist Strut - 400mm

     

    Superior alternative to unreliable, slow and costly timber struts. Meets bracing requirements for long span domestic floors.


    Product Information:

     

    - Generally required at centre of span when floor joists exceed 2.5 metres.

    - Spans exceeding 4.5 metres require two rows spaced at 1/3 and 2/3 span.

    - Sized to suit joist centre spacing of 400mm

    - Material: Pre-galvanised mild steel.

    £1.13 ex VAT
    Picture of Simpsons Herringbone Joist Strut - 600mm

    Simpsons Herringbone Joist Strut - 600mm

    HSA600

    Herringbone Joist Strut - 600mm

     

    Superior alternative to unreliable, slow and costly timber struts. Meets bracing requirements for long span domestic floors.


    Product Information:

     

    - Generally required at centre of span when floor joists exceed 2.5 metres.

    - Spans exceeding 4.5 metres require two rows spaced at 1/3 and 2/3 span.

    - Sized to suit joist centre spacing of 600mm

    - Material: Pre-galvanised mild steel.

    £1.20 ex VAT
    Picture of 600 x 30 x 5mm Flat Heavy Duty Restraint Strap

    600 x 30 x 5mm Flat Heavy Duty Restraint Strap

    H06F00

    600 x 30 x 5mm Flat Heavy Duty Restraint Strap

     

    Product Information:

     

    - Lateral restraint strap heavy duty

    - Material: Galvanised steel

    - Length: 600mm

    - Width: 30mm

    - Thickness: 5mm

     

    Installation:

     

    - Use specified fasteners.

    - Spaced not more than 2 metre centres and attached to at least 3 timber members via the use of noggins and packing.

    - Fix to timber members using the correct fasteners.

    - The bend length should be no shorter than 100mm, and should be positioned at the centre of an uncut brick or block.

    - Vertical restraint strapping should be at least 1 metre in length.

    - When straps are fixed to masonry use either hardened nails 4mm x 75mm long or wood screws into plastic plugs 5.5 x 50mm long.

    - The lowest fixing needs to be located within 150mm of the bottom of a vertical strap.

    £2.69 ex VAT
    Picture of 1000 x 30 x 5mm Flat Heavy Duty Restraint Strap

    1000 x 30 x 5mm Flat Heavy Duty Restraint Strap

    H10F00

    1000 x 30 x 5mm Flat Heavy Duty Restraint Strap

     

    Product Information:

     

    - Lateral restraint strap heavy duty

    - Material: Galvanised steel

    - Length: 1000mm

    - Width: 30mm

    - Thickness: 5mm

     

    Installation:

     

    - Use specified fasteners.

    - Spaced not more than 2 metre centres and attached to at least 3 timber members via the use of noggins and packing.

    - Fix to timber members using the correct fasteners.

    - The bend length should be no shorter than 100mm, and should be positioned at the centre of an uncut brick or block.

    - Vertical restraint strapping should be at least 1 metre in length.

    - When straps are fixed to masonry use either hardened nails 4mm x 75mm long or wood screws into plastic plugs 5.5 x 50mm long.

    - The lowest fixing needs to be located within 150mm of the bottom of a vertical strap.

    £3.99 ex VAT
    Picture of 1200 x 30 x 5mm Flat Heavy Duty Restraint Strap

    1200 x 30 x 5mm Flat Heavy Duty Restraint Strap

    H12F00

    1200 x 30 x 5mm Flat Heavy Duty Restraint Strap

     

    Product Information:

     

    - Lateral restraint strap heavy duty

    - Material: Galvanised steel

    - Length: 1200mm

    - Width: 30mm

    - Thickness: 5mm

     

    Installation:

     

    - Use specified fasteners.

    - Spaced not more than 2 metre centres and attached to at least 3 timber members via the use of noggins and packing.

    - Fix to timber members using the correct fasteners.

    - The bend length should be no shorter than 100mm, and should be positioned at the centre of an uncut brick or block.

    - Vertical restraint strapping should be at least 1 metre in length.

    - When straps are fixed to masonry use either hardened nails 4mm x 75mm long or wood screws into plastic plugs 5.5 x 50mm long.

    - The lowest fixing needs to be located within 150mm of the bottom of a vertical strap.

    £4.99 ex VAT
    Picture of 600 x 30 x 5mm Twist Heavy Duty Restraint Strap

    600 x 30 x 5mm Twist Heavy Duty Restraint Strap

    H06T10

    600 x 30 x 5mm Twist Heavy Duty Restraint Strap

     

    Product Information:

     

    - Lateral restraint straps heavy duty with 100mm twist

    - Material: Galvanised steel

    - Lengths available: 600mm

    - Width: 30mm

    - Thickness: 5mm

     

    Installation:

     

    - Use specified fasteners.

    - Spaced not more than 2 metre centres and attached to at least 3 timber members via the use of noggins and packing.

    - Fix to timber members using the correct fasteners.

    - The bend length should be no shorter than 100mm, and should be positioned at the centre of an uncut brick or block.

    - Vertical restraint strapping should be at least 1 metre in length.

    - When straps are fixed to masonry use either hardened nails 4mm x 75mm long or wood screws into plastic plugs 5.5 x 50mm long.

    - The lowest fixing needs to be located within 150mm of the bottom of a vertical strap.

    £3.49 ex VAT
    Picture of 1000 x 30 x 5mm Twist Heavy Duty Restraint Strap

    1000 x 30 x 5mm Twist Heavy Duty Restraint Strap

    H10T10

    1000 x 30 x 5mm Twist Heavy Duty Restraint Strap

     

    Product Information:

     

    - Lateral restraint straps heavy duty with 100mm twist

    - Material: Galvanised steel

    - Length: 1000mm

    - Width: 30mm

    - Thickness: 5mm

     

    Installation:

     

    - Use specified fasteners.

    - Spaced not more than 2 metre centres and attached to at least 3 timber members via the use of noggins and packing.

    - Fix to timber members using the correct fasteners.

    - The bend length should be no shorter than 100mm, and should be positioned at the centre of an uncut brick or block.

    - Vertical restraint strapping should be at least 1 metre in length.

    - When straps are fixed to masonry use either hardened nails 4mm x 75mm long or wood screws into plastic plugs 5.5 x 50mm long.

    - The lowest fixing needs to be located within 150mm of the bottom of a vertical strap.

    £4.49 ex VAT
    Picture of 1200 x 30 x 5mm Twist Heavy Duty Restraint Strap

    1200 x 30 x 5mm Twist Heavy Duty Restraint Strap

    H12T10

    1200 x 30 x 5mm Twist Heavy Duty Restraint Strap

     

    Product Information:

     

    - Lateral restraint straps heavy duty with 100mm twist

    - Material: Galvanised steel

    - Length: 1200mm

    - Width: 30mm

    - Thickness: 5mm

     

    Installation:

     

    - Use specified fasteners.

    - Spaced not more than 2 metre centres and attached to at least 3 timber members via the use of noggins and packing.

    - Fix to timber members using the correct fasteners.

    - The bend length should be no shorter than 100mm, and should be positioned at the centre of an uncut brick or block.

    - Vertical restraint strapping should be at least 1 metre in length.

    - When straps are fixed to masonry use either hardened nails 4mm x 75mm long or wood screws into plastic plugs 5.5 x 50mm long.

    - The lowest fixing needs to be located within 150mm of the bottom of a vertical strap.

    £4.89 ex VAT
    Picture of 600 x 30 x 5mm Bent Heavy Duty Restraint Strap

    600 x 30 x 5mm Bent Heavy Duty Restraint Strap

    H06B10

    600 x 30 x 5mm Bent Heavy Duty Restraint Strap

     

    Product Information:

     

    - Lateral restraint straps heavy duty with 100mm bend

    - Material: Galvanised steel

    - Length: 600mm

    - Width: 30mm

    - Thickness: 5mm

     

    Installation:

     

    - Use specified fasteners.

    - Spaced not more than 2 metre centres and attached to at least 3 timber members via the use of noggins and packing.

    - Fix to timber members using the correct fasteners.

    - The bend length should be no shorter than 100mm, and should be positioned at the centre of an uncut brick or block.

    - Vertical restraint strapping should be at least 1 metre in length.

    - When straps are fixed to masonry use either hardened nails 4mm x 75mm long or wood screws into plastic plugs 5.5 x 50mm long.

    - The lowest fixing needs to be located within 150mm of the bottom of a vertical strap.

    £2.75 ex VAT
    Picture of 1000 x 30 x 5mm Bent Heavy Duty Restraint Strap

    1000 x 30 x 5mm Bent Heavy Duty Restraint Strap

    H10B10

    1000 x 30 x 5mm Bent Heavy Duty Restraint Strap

     

    Product Information:

     

    - Lateral restraint straps heavy duty with 100mm bend

    - Material: Galvanised steel

    - Length: 1000mm

    - Width: 30mm

    - Thickness: 5mm

     

    Installation:

     

    - Use specified fasteners.

    - Spaced not more than 2 metre centres and attached to at least 3 timber members via the use of noggins and packing.

    - Fix to timber members using the correct fasteners.

    - The bend length should be no shorter than 100mm, and should be positioned at the centre of an uncut brick or block.

    - Vertical restraint strapping should be at least 1 metre in length.

    - When straps are fixed to masonry use either hardened nails 4mm x 75mm long or wood screws into plastic plugs 5.5 x 50mm long.

    - The lowest fixing needs to be located within 150mm of the bottom of a vertical strap.

    £4.29 ex VAT
    Picture of 1200 x 30 x 5mm Bent Heavy Duty Restraint Strap

    1200 x 30 x 5mm Bent Heavy Duty Restraint Strap

    H12B10

    1200 x 30 x 5mm Bent Heavy Duty Restraint Strap

     

    Product Information:

     

    - Lateral restraint straps heavy duty with 100mm bend

    - Material: Galvanised steel

    - Length: 1200mm

    - Width: 30mm

    - Thickness: 5mm

     

    Installation:

     

    - Use specified fasteners.

    - Spaced not more than 2 metre centres and attached to at least 3 timber members via the use of noggins and packing.

    - Fix to timber members using the correct fasteners.

    - The bend length should be no shorter than 100mm, and should be positioned at the centre of an uncut brick or block.

    - Vertical restraint strapping should be at least 1 metre in length.

    - When straps are fixed to masonry use either hardened nails 4mm x 75mm long or wood screws into plastic plugs 5.5 x 50mm long.

    - The lowest fixing needs to be located within 150mm of the bottom of a vertical strap.

    £5.29 ex VAT
    Picture of 1500 x 30 x 5mm Bent Heavy Duty Restraint Strap

    1500 x 30 x 5mm Bent Heavy Duty Restraint Strap

    H15B10

    1500 x 30 x 5mm Bent Heavy Duty Restraint Strap

     

    Product Information:

     

    - Lateral restraint straps heavy duty with 100mm bend

    - Material: Galvanised steel

    - Length: 1500mm

    - Width: 30mm

    - Thickness: 5mm

     

    Installation:

     

    - Use specified fasteners.

    - Spaced not more than 2 metre centres and attached to at least 3 timber members via the use of noggins and packing.

    - Fix to timber members using the correct fasteners.

    - The bend length should be no shorter than 100mm, and should be positioned at the centre of an uncut brick or block.

    - Vertical restraint strapping should be at least 1 metre in length.

    - When straps are fixed to masonry use either hardened nails 4mm x 75mm long or wood screws into plastic plugs 5.5 x 50mm long.

    - The lowest fixing needs to be located within 150mm of the bottom of a vertical strap.

    £6.50 ex VAT
    Picture of 20mm x 10mtr Simpsons Fixing Band

    20mm x 10mtr Simpsons Fixing Band

    FB20A

    20mm x 10mtr Simpsons Fixing Band

     

    FB20 fixing band is for all general light strapping needs.

     

    Perfect for DIY, industrial and agricultural applications. Comes in convenient 10 metre rolls.

     

    FB20 comes supplied in a rugged plastic dispenser, making it much easier to transport and work with

     

    Product Information:

     

    - Supplied on a 10 metre roll.

     

    - Suitable for internal applications only

     

    - Strap is punched with two different sized round holes and 1 square hole, to enable a variety of different fixings to be used.

    £10.95 ex VAT