Simpsons High Wind Ties

Concrete Block 100mm (4") Thick

This dense concrete block offers durability and reliability, making it ideal for both internal and external applications, including load-bearing walls and cavity walls.

Product Information:

- 100 mm thick concrete block for construction purposes 7.3 N

- Size: 440mm long x 215mm high x 100mm depth

- 10 Blocks per sq metre (Including 10mm mortar joint)

- Full packs of concrete blocks will be delivered by one of our crane vehicles (72 Blocks = Full Pack)

Cement 25kg Supplied in a Weatherproof Plastic Bag

O'Brien premium grade cement for jobs which require higher strength cement, such as screeds, concrete, plastering and mortar, this premium grade product is ideal.

Product Information:

- Smooth, uniform finish, and impressive drying performance.

- Premium grade O'Brien cement with 42.5N strength which offers exceptional performance.

- Supplied in a plastic based bag.

Steel Hex Nut - BZP - 8mm

Full nuts are applied to a matching male thread (examples include bolts, set screws and machine screws) and tighten two or more component parts together.

Product Information:

- Hexagon fits corresponding sockets and spanners.

8mm Steel Washer - BZP - M8

Used under the head of a bolt or nut to distribute the forces applied when tightening

Product Information:

- External Diameter: 21mm

- Thickness: 1.6mm

- Finish: BZP

O'Brien Post Mix 20kg Bag

O’Brien Cement Post Mix is a simple to use rapid setting concrete mix for fixing posts in the ground. It is pre-mixed and blended and contains cement, dried aggregates and admixtures. The cement used is O’Brien Cement manufactured in Ireland and conforms to I.S EN 197-1 2011.

Product Information:

1. 1. Dig a hole to required size for post, half fill the hole with water and place the post in the hole,
2. 2. Tip the pre-mixed aggregate uniformly into the hole around the post, until it is above the level of water,
3. 3. If any dry powder remains visible at this stage, add additional water until absorbed by the material,
4. 4. Adjust the post into position and support appropriately until material set occurs, which takes approximately 10 minutes.

Mini Hanger - 47mm

The MHA is a galvanised mini joist hanger suitable for use with regularised timber, rough sawn timber, I-Joists and LVL.

Ideally suited for small timber sections and timber members; such as trimmers and ceiling joists.

Product Information:

- Pre-galvanised mild steel.

Building Sand - 25kg Sealed Polythene Bag

Premium building sand, finely graded for masonry and general construction use. Its clean, consistent texture ensures excellent workability, strong bonding, and a smooth, durable finish for all building projects.

Product Information:

- Delivered by one of our crane vehicles in a large nylon bag

- This is a natural product and colour variations can occur

- Handy 25kg bag

19mm x 38mm Roofing Batten Treated - 4.8 metres

Roofing batten type A produced in Sweden BS 8417 Certified.

Product Information:

- Country of origin: Sweden

- Species: Spruce

- Grade: BS 8417 certified

- Moisture content: Kiln dried (18% approx.)

- Treatment: UC2

- Colour: Green

- Surface finish: Sawn

- Machined from / size: 19mm x 38mm

- Length: 4.8mts

Timco PESF Styrene Free Chemical Resin -  300ml

Polyester styrene free low odour resin is a high performance, two component, mix in the nozzle resin with European approval. Suitable for many kinds of solid and hollow masonry. Simple to apply by pumping a required resin quantity into the hole.

Product Information:

- European Technically Approved (ETA) low odour resin used in non-safety critical fixing

- For day to day non-safety critical fixing

- For enclosed or poorly ventilated environments

- Less wastage & no leakage

- Ready to use

- Mixing nozzle included

- Low extrusion force

- Fire rated

- Closer edge and axial spacing

M8 Threaded Bar Studding - 8mm x 1mts

Threaded bar (Studding) is used in general maintenance and construction.

Product Information:

- Steel

- Length: 1 Metre

- Diameter: 8mm