Nails, Screws, Coach bolts, Fixings and Fasteners for general building work.
*Please scroll down to view all sizes.*
Round Head Wire Nails (Galvanised) - Various Sizes
For general purpose use in fastening and construction.
Product Information:
- Galvanised Steel
- Length: Listed Below
- Weight: 500g bags, 2.5kg bags & 5kg tubs Listed Below
*Please scroll down to view all sizes.*
Oval Head Sheradised Steel Brads - Various Sizes
Oval nails are used where concealment is required or where there is danger that the use of standard round wire nail would split the wood. The Oval Brad is tapped below the level of the timber in door jambs, floor and skirting boards. These sherardised coating gives prolonged life through protection from moisture.
Product Information:
- Sheradised steel.
- Length: Listed Below
- Weight: 500g bags & 2.5kg bags
*Please scroll down to view all sizes.*
Round Head Wire Nails (Bright Steel) - Various Sizes
For general purpose use in fastening and construction.
Product Information:
- Steel
- Length: Listed Below
- Weight: 500g bags, 2.5kg bags & 5kg tubs Listed Below
4.5 x 50mm Decking Screw (Box of 250)
This decking screw uses the C2 twin-cut technology.
Coated with a multi-layer patented corrosion resistant plating to withstand up to 1,000 hours in a salt spray cabi net.
This new and innovative designed screw enables the screw to rapidly penetrate into the timber, cleanly countersink, and securely clamp the decking board firmly to the joists.
Product Information:
- Strengthened head to prevent shearing when using an impact tool
- Ribs under the head to improve countersinking
- Helix shank for removing debris and to benefit clamping
- Coated with a patented multi-layer corrosion resistant plating which withstands up to 1,000 hours salt spray
- Patented twin cut technology for rapid "pick-up" which reduces timber splitting
*Please scroll down to view all sizes.*
Annular Ring Shank Nails (Steel) - Various Sizes
For general purpose use in fastening and construction.
Product Information:
- Steel
- Annular ring shank for gripping
- Length: Listed Below
- Weight: 500g bags, 2.5kg bags & 5kg tubs Listed Below
*Please scroll down to view all sizes.*
Oval Head Brad Nails (Steel) - Various Sizes
For general purpose use in fastening and construction.
Product Information:
- Steel
- Length: Listed Below
- Weight: 500g bags, 2.5kg bags & 5kg tubs Listed Below
4.5 x 65mm Decking Screw (Box of 250)
This decking screw uses the C2 twin-cut technology.
Coated with a multi-layer patented corrosion resistant plating to withstand up to 1,000 hours in a salt spray cabi net.
This new and innovative designed screw enables the screw to rapidly penetrate into the timber, cleanly countersink, and securely clamp the decking board firmly to the joists.
Product Information:
- Strengthened head to prevent shearing when using an impact tool
- Ribs under the head to improve countersinking
- Helix shank for removing debris and to benefit clamping
- Coated with a patented multi-layer corrosion resistant plating which withstands up to 1,000 hours salt spray
- Patented twin cut technology for rapid "pick-up" which reduces timber splitting
4.5 x 65mm Decking Screw (Tub of 1000)
This decking screw uses the C2 twin-cut technology.
Coated with a multi-layer patented corrosion resistant plating to withstand up to 1,000 hours in a salt spray cabi net.
This new and innovative designed screw enables the screw to rapidly penetrate into the timber, cleanly countersink, and securely clamp the decking board firmly to the joists.
Product Information:
- Strengthened head to prevent shearing when using an impact tool
- Ribs under the head to improve countersinking
- Helix shank for removing debris and to benefit clamping
- Coated with a patented multi-layer corrosion resistant plating which withstands up to 1,000 hours salt spray
- Patented twin cut technology for rapid "pick-up" which reduces timber splitting
4.5 x 75mm Decking Screw (Box of 250)
This decking screw uses the C2 twin-cut technology.
Coated with a multi-layer patented corrosion resistant plating to withstand up to 1,000 hours in a salt spray cabi net.
This new and innovative designed screw enables the screw to rapidly penetrate into the timber, cleanly countersink, and securely clamp the decking board firmly to the joists.
Product Information:
- Strengthened head to prevent shearing when using an impact tool
- Ribs under the head to improve countersinking
- Helix shank for removing debris and to benefit clamping
- Coated with a patented multi-layer corrosion resistant plating which withstands up to 1,000 hours salt spray
- Patented twin cut technology for rapid "pick-up" which reduces timber splitting
Timber Screws - Hex - Exterior - Mixed Grab Pack - Green - 165 Pieces
Contents:
- 6.7 x 75 (Qty 30)
- 6.7 x 87 (Qty 45)
- 6.7 x 100 (Qty 35)
- 6.7 x 125 (Qty 35)
- 6.7 x 150 (Qty 20)
- 8mm Socket Driver Bit (Qty 1)
Product Information:
A selection of popular exterior hex head landscaping screw sizes in a handy and reusable storage pack with clip-shut lid.
- Hex head countersunk with a fixed washer
- Long lasting plating withstands up to 1,000 hours salt spray resistance in accordance to BS EN 9227:2012
- Helix shank for removing debris and to improve clamping
- 50° deep single thread to provide a secure fixing with high pull-out resistance
- Finish: Exterior (Green Organic)
Thunderbolt Masonry Fixing - Priced Per Bolt
Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone.
It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications.
The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt.
Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.
Product Information:
- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust.
- Remove any loose debris from the hole.
- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action.
- Tighten the Thunderbolt™ to secure the fixture firmly in place.
Thunderbolt Masonry Fixing - Priced Per Bolt
Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone.
It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications.
The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt.
Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.
Product Information:
- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust.
- Remove any loose debris from the hole.
- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action.
- Tighten the Thunderbolt™ to secure the fixture firmly in place.
Thunderbolt Masonry Fixing - Priced Per Bolt
Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone.
It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications.
The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt.
Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.
Product Information:
- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust.
- Remove any loose debris from the hole.
- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action.
- Tighten the Thunderbolt™ to secure the fixture firmly in place.
Thunderbolt Masonry Fixing - Priced Per Bolt
Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone.
It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications.
The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt.
Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.
Product Information:
- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust.
- Remove any loose debris from the hole.
- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action.
- Tighten the Thunderbolt™ to secure the fixture firmly in place.
Thunderbolt Masonry Fixing - Priced Per Bolt
Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone.
It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications.
The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt.
Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.
Product Information:
- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust.
- Remove any loose debris from the hole.
- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action.
- Tighten the Thunderbolt™ to secure the fixture firmly in place.
Joist Hanger with Adjustable Height Strap - 100mm x 270mm
Height adjustable joist hanger for supporting timber joists from timber members.
Product Information:
- A galvanised joist hanger that provides great support with ease of installation.
- Wider strap provides more surface area on the supporting timber and allows increased nail spacing, enhancing the performance of the critical hanger-to-support part of the connection.
- Minimum and maximum nailing schedules are stamped into the strap providing correct installation information for site operatives.
- Speed-prong holds the hanger in position to allow easier attachment. The installer no longer has to try to hold hanger, joist and nail with one hand and swing a hammer with the other!
- JHA270 range features a location tab which allows easier alignment of the hanger.
- The model number and size is stamped into the seat of the hanger for easy identification, even after installation.
- Pre-galvanised mild steel.
Suitable on:
- Solid sawn timber joists.
When to use:
- Face Fix
- Wrap Over
Joist Hanger with Adjustable Height Strap - 100mm x 450mm
Height adjustable joist hanger for supporting timber joists from timber members.
Product Information:
- A galvanised joist hanger that provides great support with ease of installation.
- Wider strap provides more surface area on the supporting timber and allows increased nail spacing, enhancing the performance of the critical hanger-to-support part of the connection.
- Minimum and maximum nailing schedules are stamped into the strap providing correct installation information for site operatives.
- Speed-prong holds the hanger in position to allow easier attachment. The installer no longer has to try to hold hanger, joist and nail with one hand and swing a hammer with the other!
- JHA450 range features longer legs.
- The model number and size is stamped into the seat of the hanger for easy identification, even after installation.
- Pre-galvanised mild steel.
Suitable on:
- Solid sawn timber joists.
When to use:
- Face Fix
- Wrap Over
Frame Ties - 100mm x 50mm
When fixing windows, door frames etc. to masonry, the frame tie provides enhanced mortar keying and reduces the risk of injury from sharp edges.
Note: Frame tie should be fully embedded into mortar.
Timco Heavy Duty Staples - Chisel Point - Galvanised - 10mm
Heavy duty staples suitable for a range of professional second fix applications including carpet fitting, roof insulating, woodworking and more.
Product Information:
Super sharp chisel point
Heavy duty 1.2mm wire
Galvanised for medium duty rust protection
Flat crown for improved material clamping
Pack size: 1000
Nylon Insert Nut - 10mm
Nylon insert nuts are an economical means of combatting loosening from vibration. A nylon neck situated at the top of the nut, is slightly narrower than the thread; as the nut is tightened, the nylon grips the corresponding thread.
Product Information:
- Metric coarse thread DIN 985 Type T
- The bolt threads into the nylon material located at the top of the hex nut
- The nut then "self-locks" and prevents loosening from vibration
- High tensile steel Grade 8.8
- Zinc coated for corrosion resistance