Products tagged with 'screws'

Collated Drywall Screws - PH - Bugle - Coarse Thread - Black - 3.5 x 25

Used to secure wallboards to stud work. The collated strips are specifically designed to be compatible with all leading power tool brands.

Product Information:

- The collated strips are specifically designed to be compatible with all leading power tool brands

- Fire Classification - A1

4.5 x 75mm Decking Screw (Box of 250)

This decking screw uses the C2 twin-cut technology.

Coated with a multi-layer patented corrosion resistant plating to withstand up to 1,000 hours in a salt spray cabi net.

This new and innovative designed screw enables the screw to rapidly penetrate into the timber, cleanly countersink, and securely clamp the decking board firmly to the joists.

Product Information:

• Strengthened head to prevent shearing when using an impact tool,
• Ribs under the head to improve countersinking,
• Helix shank for removing debris and to benefit clamping,
• Coated with a patented multi-layer corrosion resistant plating which withstands up to 1,000 hours salt spray,
• Patented twin cut technology for rapid "pick-up" which reduces timber splitting.

4.5 x 50mm Decking Screw (Box of 250)

This decking screw uses the C2 twin-cut technology.

Coated with a multi-layer patented corrosion resistant plating to withstand up to 1,000 hours in a salt spray cabi net.

This new and innovative designed screw enables the screw to rapidly penetrate into the timber, cleanly countersink, and securely clamp the decking board firmly to the joists.

Product Information:

• Strengthened head to prevent shearing when using an impact tool,
• Ribs under the head to improve countersinking,
• Helix shank for removing debris and to benefit clamping,
• Coated with a patented multi-layer corrosion resistant plating which withstands up to 1,000 hours salt spray,
• Patented twin cut technology for rapid "pick-up" which reduces timber splitting.

Collated drywall Screws - PH - Bugle - Coarse Thread - Black - 3.5 x 32

Used to secure wallboards to stud work. The collated strips are specifically designed to be compatible with all leading power tool brands.

Product Information:

- The collated strips are specifically designed to be compatible with all leading power tool brands

- Fire Classification - A1

Collated Drywall Screws - PH - Bugle - Coarse Thread - Black - 3.5 x 38

Used to secure wallboards to stud work. The collated strips are specifically designed to be compatible with all leading power tool brands.

Product Information:

- The collated strips are specifically designed to be compatible with all leading power tool brands

- Fire Classification - A1

Collated Drywall Screws - PH - Bugle - Coarse Thread - Black - 3.5 x 45

Used to secure wallboards to stud work. The collated strips are specifically designed to be compatible with all leading power tool brands.

Product Information:

- The collated strips are specifically designed to be compatible with all leading power tool brands

- Fire Classification - A1

Collated Drywall Screws - PH - Bugle - Coarse Thread - Black - 3.5 x 55

Used to secure wallboards to stud work. The collated strips are specifically designed to be compatible with all leading power tool brands.

Product Information:

- The collated strips are specifically designed to be compatible with all leading power tool brands

- Fire Classification - A1

Collated Drywall Screws - PH - Bugle - Coarse Thread - Black - 4.2 x 75

Used to secure drywall to stud work. The collated strips are specifically designed to be compatible with all leading power tool brands.

NOTE: Partially Threaded

Product Information:

- The collated strips are specifically designed to be compatible with all leading power tool brands

- Fire Classification - A1

4.5 x 65mm Decking Screw (Box of 250)

This decking screw uses the C2 twin-cut technology.

Coated with a multi-layer patented corrosion resistant plating to withstand up to 1,000 hours in a salt spray cabi net.

This new and innovative designed screw enables the screw to rapidly penetrate into the timber, cleanly countersink, and securely clamp the decking board firmly to the joists.

Product Information:

• Strengthened head to prevent shearing when using an impact tool,
• Ribs under the head to improve countersinking,
• Helix shank for removing debris and to benefit clamping,
• Coated with a patented multi-layer corrosion resistant plating which withstands up to 1,000 hours salt spray,
• Patented twin cut technology for rapid "pick-up" which reduces timber splitting.

4.5 x 65mm Decking Screw (Tub of 1000)

This decking screw uses the C2 twin-cut technology.

Coated with a multi-layer patented corrosion resistant plating to withstand up to 1,000 hours in a salt spray cabi net.

This new and innovative designed screw enables the screw to rapidly penetrate into the timber, cleanly countersink, and securely clamp the decking board firmly to the joists.

Product Information:

• Strengthened head to prevent shearing when using an impact tool,
• Ribs under the head to improve countersinking,
• Helix shank for removing debris and to benefit clamping,
• Coated with a patented multi-layer corrosion resistant plating which withstands up to 1,000 hours salt spray,
• Patented twin cut technology for rapid "pick-up" which reduces timber splitting.

Classic Multi-Purpose Screws - PZ - Double Countersunk - A2 Stainless Steel - 4 x 30mm

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipb oard, M DF and p lastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

Product Information:

- Double countersunk reduces the likelihood of head shear and assists completion of countersinking

- 40° deep single thread to provide a secure fixing with high pull-out resistance

- Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge

- All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Classic Multi-Purpose Screws - PZ - Double Countersunk - A2 Stainless Steel - 4 x 40mm

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipb oard, M DF and p lastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

Product Information:

- Double countersunk reduces the likelihood of head shear and assists completion of countersinking

- 40° deep single thread to provide a secure fixing with high pull-out resistance

- Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge

- All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Classic Multi-Purpose Screws - PZ - Double Countersunk - A2 Stainless Steel - 4 x 50mm

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipb oard, M DF and p lastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

Product Information:

- Double countersunk reduces the likelihood of head shear and assists completion of countersinking

- 40° deep single thread to provide a secure fixing with high pull-out resistance

- Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge

- All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Classic Multi-Purpose Screws - PZ - Double Countersunk - A2 Stainless Steel - 4 x 60mm

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipb oard, M DF and p lastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

Product Information:

- Double countersunk reduces the likelihood of head shear and assists completion of countersinking

- 40° deep single thread to provide a secure fixing with high pull-out resistance

- Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge

- All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Classic Multi-Purpose Screws - PZ - Double Countersunk - A2 Stainless Steel - 4 x 70mm

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipb oard, M DF and p lastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

Product Information:

- Double countersunk reduces the likelihood of head shear and assists completion of countersinking

- 40° deep single thread to provide a secure fixing with high pull-out resistance

- Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge

- All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Classic Multi-Purpose Screws - PZ - Double Countersunk - A2 Stainless Steel - 5 x 100mm

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipb oard, M DF and p lastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

Product Information:

- Double countersunk reduces the likelihood of head shear and assists completion of countersinking

- 40° deep single thread to provide a secure fixing with high pull-out resistance

- Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge

- All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Classic Multi-Purpose Screws - PZ - Double Countersunk - A2 Stainless Steel - 5 x 40mm

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipb oard, M DF and p lastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

Product Information:

- Double countersunk reduces the likelihood of head shear and assists completion of countersinking

- 40° deep single thread to provide a secure fixing with high pull-out resistance

- Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge

- All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Classic Multi-Purpose Screws - PZ - Double Countersunk - A2 Stainless Steel - 5 x 50mm

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipb oard, M DF and p lastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

Product Information:

- Double countersunk reduces the likelihood of head shear and assists completion of countersinking

- 40° deep single thread to provide a secure fixing with high pull-out resistance

- Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge

- All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Classic Multi-Purpose Screws - PZ - Double Countersunk - A2 Stainless Steel - 5 x 60mm

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipb oard, M DF and p lastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

Product Information:

- Double countersunk reduces the likelihood of head shear and assists completion of countersinking

- 40° deep single thread to provide a secure fixing with high pull-out resistance

- Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge

- All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Classic Multi-Purpose Screws - PZ - Double Countersunk - A2 Stainless Steel - 5 x 70mm

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipb oard, M DF and p lastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

Product Information:

- Double countersunk reduces the likelihood of head shear and assists completion of countersinking

- 40° deep single thread to provide a secure fixing with high pull-out resistance

- Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge

- All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length