Primers, Fillers & Tapes

Plaster board Metal Reinforced Corner Tape 30mts

Reinforce corners professionally with this tape which is an alternative to metal beading it gives a crisp angle every time, and can also be used  around windows and doors.

The product is easy to use and is heavy duty due to the metal strips on the tape.

Product Information:

- Use for internal and external corners

- Manufactured from paper and metal strips

- For plaster board corners

- Easily cut to length

- Roll width: 50mm

- Roll length: 30mts

- Colour: White

Plaster board Paper Joint Tape

White joint tape for reinforcing plaster board joints.

Product Information:

- For plaster board joints and corners

- Manufactured from paper

- Roll width: 50mm

- Roll length: 150mts

- Colour: White

Hi-Tac Self Adhesive Fibre Glass Tape - 100mm x 45mts

Hi Tac self adhesive drywall tape for the drywall professional, ultimate adhesion guaranteed.

Product Information:

- Is a multi purpose mesh tape for use in plaster board jointing, and for repairs,

- Designed to reinforce the plaster board joint and is suitable for all types of plaster boards,

- As it is a self adhesive product time is saved on installation compared to traditional scrim products,

- Hi-Tac uses a much higher gl ue content than other fibr eglass tapes, and therefore provides a far superior adhesion in colder temperatures

FT Extra Self Adhesive Fibreglass Tape 1m x 30m Roll

Large self adhesive scrim tape is usually used to repair cracks in ceilings. This scrim is the modern alternative to traditional jute and cotton scrim, being substantially quicker and easier to install

Product Information:

- Each roll is individually shrink wrapped to prevent drying out of the adhesive

- Colour: White

- 1000mm x 30mtr

Knauf Fill & Finish Light - 20kg

Ideal for taping and finishing joints in drywall partitions and ceilings, suitable for use with paper tape, paper-faced beads and metal corner beads.

Product Information:

- Ready mixed for minimal preparation smooth application, and longer lasting performance.

- Sands more easily than traditional compounds for manual and machine application.

- Weighs up to 35% less than other traditional compounds, very low shrinkage; only two coats required in metal partition systems.

Hi-Tac Self Adhesive Fibre Glass Tape - 50mm x 90mts

Hi Tac self adhesive drywall tape for the drywall professional, ultimate adhesion guaranteed.

Product Information:

- Is a multi purpose mesh tape for use in plaster board jointing, and for repairs

- Designed to reinforce the plaster board joint and is suitable for all types of plaster boards

- As it is a self adhesive product time is saved on installation compared to traditional scrim products

- Hi-Tac uses a much higher gl ue content than other fibr eglass tapes, and therefore provides a far superior adhesion in colder temperatures

Wondertex Prem Fill & Finish 7.5kg Plaster board Jointing Filler

Prem fill & finish is a filler / smoother, designed for the filling, smoothing, and finishing of plaster board joints.

Product Information:

- Cures hard providing a durable surface

- Minimal shrinkage avoiding cracking

- 60 minute working time before setting

- Super fine smooth finish

- Fast setting

- Easy sa nding

Everbuild All Purpose Powder Filler

A high strength powder filler which is the ideal choice for most indoor repairs. When mixed with water, the filler is ready to apply in one minute and dries in about one hour to a smooth sandable finish. Due to the high levels of added PVA powder, this filler will not shrink or crack and is strong enough to accept nails and screws.

Product Information:

- Heavy-duty tough filler – will accept nails or screws when dry.

- Non Shrink.

- Overpaintable with most solvent based and emulsion paints.

- Overstainable.

Everbuild All Purpose Ready Mixed Filler - 1kg

All Purpose Filler is an easy to use ready mixed filler which is suitable for both interior and exterior use. Dries to a smooth but tough crack resistant sandable finish which may be painted, papered or stained.

The product is designed for indoor or outdoor repairs to plaster, plasterboard, brick, render, wood, stone and most other building materials.

Size - 1kg

Everbuild One Strike Filler - 250ml

One Strike is a revolutionary filler formulated using lightweight polymer bubbles that fills holes and cracks, even deep holes, in just one quick application. There is no need for secondary filling to level off as the filler will not shrink, sag or crack. 

Product Information:

- Easy to apply

- No sanding required – finishes to a smooth surface

- Quick drying – ready to paint/paper in approx. 30 minutes

- Fills up to 75mm deep in one application

- No sagging or shrinkage

- Overpaintable with most solvent based and emulsion paints

- Overstainable

- Suitable for internal and external use

- Dries brilliant white

- Size: 250 ml

FC1 Acrylic Filler & Caulk 310ml - White

A versatile acrylic based premium grade filler and caulk, FC1 is designed specifically for professional users and utilises scientific advancements in elastomer technology. With its unique blend of acrylic polymers and selected fillers made to the very highest specification, FC1 bonds and seals gaps between wood, metal, brick, stone, plaster and plastics.

Product Information:

- Ultra smooth finish – no sanding required

- Fill up to 25mm in one application

- Acrylic based with maximum flexibility

- Contains no solvents

- Will not crack

- Superior colour stability

Febond Blue Grit Bonding Agent Primer - 10 Litres

Blue Grit is a high-performance plasterers grip coat bonding agent designed to provide an improved key to smooth surfaces. It contains a fine aggregate which provides a mechanical key to backgrounds such as plaster, concrete, painted surfaces, textured surfaces and ceramic tiles.

Product Information:

- Bond strength tested in accordance with EN13892-8.

- Ready to use immediately from the tub.

- Simple application by roller or brush.

- Coloured Blue to indicate coverage.

- One coat application.

Febond Blue Grit Bonding Agent Primer - 5 Litres

Blue Grit is a high-performance plasterers grip coat bonding agent designed to provide an improved key to smooth surfaces. It contains a fine aggregate which provides a mechanical key to backgrounds such as plaster, concrete, painted surfaces, textured surfaces and ceramic tiles.

Product Information:

- Bond strength tested in accordance with EN13892-8.

- Ready to use immediately from the tub.

- Simple application by roller or brush.

- Coloured Blue to indicate coverage.

- One coat application.

Everbuild One Strike Filler - 1 Litre

One Strike is a revolutionary filler formulated using lightweight polymer bubbles that fills holes and cracks, even deep holes, in just one quick application. There is no need for secondary filling to level off as the filler will not shrink, sag or crack. 

Product Information:

- Easy to apply

- No sanding required – finishes to a smooth surface

- Quick drying – ready to paint/paper in approx. 30 minutes

- Fills up to 75mm deep in one application

- No sagging or shrinkage

- Overpaintable with most solvent based and emulsion paints

- Overstainable

- Suitable for internal and external use

- Dries brilliant white

- Size: 1 Litre