Power Tool Accessories

Timco Professional SDS Plus Hammer Bit - 10.0 x Multiple sizes

A high performance drill bit with a superior carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. USER CAUTION: Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside.

Product Information:

- Special nickel chromoly shank

- High quality BC20 Tungsten Carbide tip

- Cold formed blanks utilised up to 11mm diameter

- Fully heat treated to eliminate bending

- Twin flute design for increased drilling performance

- Shot-peened for increased strength and durability

- PGM approved and marked

- Large range of sizes to cover most drilling applications, including direct fix anchors

- Length: Listed below

SDS Plus Steels - Point - 10 x 250mm

Designed for use in rotation stop hammers with the SDS Plus tool holder system. Breaks up concrete and masonry.

NOTE: NOT TO BE USED IN ROTARY MODE.

Product Information:

- Heat treated

- Shot blast finish for rust protection

Timco Professional SDS Plus Hammer Bit - 12.0 x Multiple sizes

A high performance drill bit with a superior carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. USER CAUTION: Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside.

Product Information:

- Special nickel chromoly shank

- High quality BC20 Tungsten Carbide tip

- Cold formed blanks utilised up to 11mm diameter

- Fully heat treated to eliminate bending

- Twin flute design for increased drilling performance

- Shot-peened for increased strength and durability

- PGM approved and marked

- Large range of sizes to cover most drilling applications, including direct fix anchors

- Length: Listed below

Timco Professional SDS Plus Hammer Bit - 16.0 x 210

A high performance drill bit with a superior carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. USER CAUTION: Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside.

Product Information:

Special nickel chromoly shank

High quality BC20 Tungsten Carbide tip

Cold formed blanks utilised up to 11mm diameter

Fully heat treated to eliminate bending

Twin flute design for increased drilling performance

Shot-peened for increased strength and durability

PGM approved and marked

Large range of sizes to cover most drilling applications, including direct fix anchors

SDS Plus Steels - Chisel - 20 x 250mm

Designed for use in rotation stop hammers with the SDS Plus tool holder system. Breaks up concrete and masonry. Also removes plaster or rendering.

NOTE: NOT TO BE USED IN ROTARY MODE.

Product Information:

- Heat treated

- Shot blast finish for rust protection

SDS Plus Steels - Gouge - 22 x 250mm

Designed for use in rotation stop hammers with the SDS Plus tool holder system. Removes mortar from brickwork prior to re-pointing.

NOTE: NOT TO BE USED IN ROTARY MODE.

Product Information:

- Heat treated

- Shot blast finish for rust protection

SDS Plus Steels - Spade - 40 x 250

Designed for use in rotation stop hammers with the SDS Plus tool holder system. Breaks up concrete and masonry. Also removes plaster or rendering.

NOTE: NOT TO BE USED IN ROTARY MODE.

Product Information:

- Heat treated

- Shot blast finish for rust protection

SDS Plus Steels - Tile - 40 x 250mm

Designed for use in rotation stop hammers with the SDS Plus tool holder system. Angled head design for easy removal of tiles, plaster or rendering.

NOTE: NOT TO BE USED IN ROTARY MODE.

Product Information:

- Heat treated

- Shot blast finish for rust protection

- Angled head design for easy removal of tiles, plaster or rendering

Timco Professional SDS Plus Hammer Bit - 4.0 x 160

A high performance drill bit with a superior carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. USER CAUTION: Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside.

Product Information:

Special nickel chromoly shank

High quality BC20 Tungsten Carbide tip

Cold formed blanks utilised up to 11mm diameter

Fully heat treated to eliminate bending

Twin flute design for increased drilling performance

Shot-peened for increased strength and durability

PGM approved and marked

Large range of sizes to cover most drilling applications, including direct fix anchors

Timco Professional SDS Plus Hammer Bit - 5.5 x 160

A high performance drill bit with a superior carbide tip to give extended durability. USER CAUTION: Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside.

Product Information:

- Special nickel chromoly shank

- High quality BC20 Tungsten Carbide tip

- Cold formed blanks utilised up to 11mm diameter

- Fully heat treated to eliminate bending

- Twin flute design for increased drilling performance

- Shot-peened for increased strength and durability

- Large range of sizes to cover most drilling applications, including direct fix anchors

Timco Professional SDS Plus Hammer Bit - 5.5 x 210

A high performance drill bit with a superior carbide tip to give extended durability. USER CAUTION: Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside.

Product Information:

- Special nickel chromoly shank

- High quality BC20 Tungsten Carbide tip

- Cold formed blanks utilised up to 11mm diameter

- Fully heat treated to eliminate bending

- Twin flute design for increased drilling performance

- Shot-peened for increased strength and durability

- Large range of sizes to cover most drilling applications, including direct fix anchors

Timco Professional SDS Plus Hammer Bit - 6.0 x Multiple lengths

A high performance drill bit with a superior carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. USER CAUTION: Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside.

Product Information:

- Special nickel chromoly shank

- High quality BC20 Tungsten Carbide tip

- Cold formed blanks utilised up to 11mm diameter

- Fully heat treated to eliminate bending

- Twin flute design for increased drilling performance

- Shot-peened for increased strength and durability

- PGM approved and marked

- Large range of sizes to cover most drilling applications, including direct fix anchors

- Length: Listed below

Timco Professional SDS Plus Hammer Bit - 7.0 x 160

A high performance drill bit with a superior carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. USER CAUTION: Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside.

Product Information:

- Special nickel chromoly shank

- High quality BC20 Tungsten Carbide tip

- Cold formed blanks utilised up to 11mm diameter

- Fully heat treated to eliminate bending

- Twin flute design for increased drilling performance

- Shot-peened for increased strength and durability

- PGM approved and marked

- Large range of sizes to cover most drilling applications, including direct fix anchors

Timco Professional SDS Plus Hammer Bit - 7.0 x 210

A high performance drill bit with a superior carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. USER CAUTION: Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside.

Product Information:

- Special nickel chromoly shank

- High quality BC20 Tungsten Carbide tip

- Cold formed blanks utilised up to 11mm diameter

- Fully heat treated to eliminate bending

- Twin flute design for increased drilling performance

- Shot-peened for increased strength and durability

- PGM approved and marked

- Large range of sizes to cover most drilling applications, including direct fix anchors

Timco Professional SDS Plus Hammer Bit - 8.0 x Multiple sizes

A high performance drill bit with a superior carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. USER CAUTION: Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside.

Product Information:

- Special nickel chromoly shank

- High quality BC20 Tungsten Carbide tip

- Cold formed blanks utilised up to 11mm diameter

- Fully heat treated to eliminate bending

- Twin flute design for increased drilling performance

- Shot-peened for increased strength and durability

- PGM approved and marked

- Large range of sizes to cover most drilling applications, including direct fix anchors

- Length: Listed below

Bonded Abrasive Disc - For Cutting - 115 x 22.2 x 1.0

A tin of 10 115mm bonded abrasive discs. Used for cutting slits into various types of metals, including stainless steel / inox.

Product Information:

- Manufactured to European standard EN 12413

- Reduced burring

- Less heat distortion

- High cutting speed

- Pack Quantity: 10 Pieces

TIMCO Bonded Abrasive Disc - For Cutting 115 x 22.2 x 2.5

Used for cutting various types of metals.

Product Information:

- Manufactured to European standard EN 12413

- High stability

- Long life

- High cutting speed

TIMCO Bonded Abrasive Disc - For Cutting 230 x 22.2 x 3.2

Used for cutting various types of metals.

Product Information:

- Manufactured to European standard EN 12413

- High stability

- Long life

- High cutting speed

TIMCO Bonded Abrasive Disc - For Cutting 300 x 20.0 x 3.2

Used for cutting various types of metals.

Product Information:

- Manufactured to European standard EN 12413

- High stability

- Long life

- High cutting speed

Multi-Tool Blade Sets - 4 Piece Set - Mixed

Convenient four piece mixed set of popular blades. Ideal for multiple applications.

Product Information:

- Quick release fitment

Contents:

- 32mm Fine Cut Blade (Qty 1)

- 69mm Fine Cut Blade (Qty 1)

- 32mm Coarse Cut Blade (Qty 1)

- 69mm Coarse Cut Blade (Qty 1)

Multi-Tool Blade Sets - 8 Piece Set - Mixed

Convenient eight piece mixed set of popular blades. Ideal for multiple applications.

Product Information:

- Quick release fitment

Contents:

- 10mm Fine Cut Blade (Qty 1)

- 20mm Fine Cut Blade (Qty 1)

- 32mm Fine Cut Blade (Qty 1)

- 69mm Fine Cut Blade (Qty 1)

- Ø87mm Radial Blade (Qty 1)

- 32mm Coarse Cut Blade (Qty 1)

- 69mm Coarse Cut Blade (Qty 1)

- 52mm Flexible Scraper Blade (Qty 1)

Timco Professional SDS Plus Hammer Bit - 5.0 x 210

A high performance drill bit with a superior carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. USER CAUTION: Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside.

Product Information:

- Special nickel chromoly shank

- High quality BC20 Tungsten Carbide tip

- Cold formed blanks utilised up to 11mm diameter

- Fully heat treated to eliminate bending

- Twin flute design for increased drilling performance

- Shot-peened for increased strength and durability

- PGM approved and marked

- Large range of sizes to cover most drilling applications, including direct fix anchors