M6 x 75mm Coach Screw - Hex Head - BZP

O'Brien Post Mix 20kg Bag

O’Brien Cement Post Mix is a simple to use rapid setting concrete mix for fixing posts in the ground. It is pre-mixed and blended and contains cement, dried aggregates and admixtures. The cement used is O’Brien Cement manufactured in Ireland and conforms to I.S EN 197-1 2011.

Product Information:

1. 1. Dig a hole to required size for post, half fill the hole with water and place the post in the hole,
2. 2. Tip the pre-mixed aggregate uniformly into the hole around the post, until it is above the level of water,
3. 3. If any dry powder remains visible at this stage, add additional water until absorbed by the material,
4. 4. Adjust the post into position and support appropriately until material set occurs, which takes approximately 10 minutes.

12" Medium Tee Hinge - Black (Per Pair)

A popular hinge for general applications.

Product Information:

- Style: T hinge

- Finish: Black

- Sizes: 300mm

- Price shown is per pair

Drive in Post Spike - Bolt Secure - Hot Dipped Galvanised - 75mm x 600mm

Drive in post spikes are a quick and easy way to erect fencing and garden posts as they require no digging or concreting into place, saving time and money. The bolt secure version features 2x 8mm carriage bolts that tighten and clamp the post firmly into the post holder section to prevent any post movement, as well as allowing for over / under sized post tolerance. Designed to allow for removal of the post at a later stage if required.

Product Information:

- Features a 4 fin steel spike to ensure a solid, permanent, wind resistant fit

- Prevents against post rot and decay as it will hold the base of the post above ground level

- Hot dipped galvanised for maximum rust protection

- Can be painted over

- Suitable for 4ft fencing

4" Brenton Bolt - Black Finish

Brenton bolt black finish which can be locked using a padlock.

Product Information:

- Finish: Black japanned

- Security: Lockable

- Lengths: 101mm