Lead & Flashing

*Please scroll down to view all lengths & widths.*

Code 3 Cast Lead

Product Information:

- Lead (cast) roll

- Gauge: Code 3

- Length: Listed below

- Width: Listed below

*Please scroll down to view all lengths & widths.*

Code 4 Cast Lead

Product Information:

- Lead (cast) roll

- Gauge: Code 4

- Length: Listed below

- Width: Listed below

Seldek Aluminium Rubber Roof Flashing 50 - 170mm Black EPDM (SDA101B)

Installs in a flash on Tile or Slate Roofs, The Seldek Aluminium won't stain or corrode roofs and gutters. The EPDM cone, which is trimmed on site to fit, is ingeniously locked to a high grade and malleable 99.9% pure aluminium base. The fast economical way to flash a tile roof.

Product Information:

- Roof Pitch : 0-45°

- Base Size : 500 x 600mm

- Size Range : 50 - 170mm

- Material / Colour : Black EPDM

Seldek Aluminium Rubber Roof Flashing 110 - 200mm Black EPDM (SDA102B)

Installs in a flash on Tile or Slate Roofs, The Seldek Aluminium won't stain or corrode roofs and gutters. The EPDM cone, which is trimmed on site to fit, is ingeniously locked to a high grade and malleable 99.9% pure aluminium base. The fast economical way to flash a tile roof.

Product Information:

- Roof Pitch : 0-45°

- Base Size : 600 x 600mm

- Size Range : 110 - 200mm

- Material / Colour : Black EPDM

Everbuild Black Jack 902 Bitumen & Flashing Primer - 1 Ltr

Bitumen and Flashing Primer is a thin black primer used to give a key prior to applying bitumen paints, roof coatings and flashing.

Product Information:

- Suitable for use with all bituminous surface coatings

- Fast drying

- Size: 1 Litre

Usage:

Mainly used for priming:

- Concrete roofs and floors, cementitious screeds and renders.

- Bitumen felt, asphalt and mastic.

- Weathered corrugated iron and steel.

- Wood.

- Also suitable as a primer prior to applying BLACK JACK FLASHING TAPE.

Black Jack Flashing Tape Self-Adhesive - 150mm x 10 metres

Black Jack Flashing Tape provides a strong waterproof seal it comprises of an aluminium foil and a bitumen rubber adhesive.

Product Information:  Black Jack Self Adhesive Flashing Tape.pdf

- Exterior use.

- Replaces the requirement for lead flashing.

- Application: Self-adhesive.

- Suitability: For the majority of flashing applications.

- For general repair to existing flashings.

- Suitable for repairing lead gutters, cracks in concrete, and the replacement of lost lead flashings.

Black Jack Flashing Tape Self-Adhesive - 300mm x 10 metres

Black Jack Flashing Tape provides a strong waterproof seal it comprises of an aluminium foil and a bitumen rubber adhesive.

Product Information:  Black Jack Self Adhesive Flashing Tape.pdf

- Exterior use

- Replaces the requirement for lead flashing

- Application: Self-adhesive

- Suitability: For the majority of flashing applications

- For general repair to existing flashings

- Suitable for repairing lead gutters, cracks in concrete, and the replacement of lost lead flashings

Sika Black Jack Flashing Tape Self-Adhesive - 100mm x 10 metres

Product Information:

- Exterior use

- Replaces the requirement for lead flashing

- Application: Self-adhesive

- Suitability: For the majority of flashing applications

- For general repair to existing flashings

- Suitable for repairing lead gutters, cracks in concrete, and the replacement of lost lead flashings

Sika Black Jack Flashing Tape Self-Adhesive - 225mm x 10 metres

Product Information:

- Exterior use

- Replaces the requirement for lead flashing

- Application: Self-adhesive

- Suitability: For the majority of flashing applications

- For general repair to existing flashings

- Suitable for repairing lead gutters, cracks in concrete, and the replacement of lost lead flashings

Inter-loc Horizontal Cavity Tray - 2 Brick - 150mm Lead Attached

Preformed leaded horizontal cavity tray system for new build and existing walls.

Featuring integral interlocking lapped joints to securely join cavity tray lengths together and create a watertight run which eliminates the requirement of additional tray jointing adhesives (taping etc.) on site.

Uses:

- At the abutment of a flat roof with a cavity wall

- At the abutment of a lean-to or mono pitch roof with a cavity wall

- On external walls – not exceeding 102.5mm in thickness – built from standard brickwork, blockwork or stone

- Clear cavity widths of between 50mm-125mm

Inter-loc Horizontal Cavity Tray - 2 Brick - 300mm Lead Attached

Preformed leaded horizontal cavity tray system for new build and existing walls.

Featuring integral interlocking lapped joints to securely join cavity tray lengths together and create a watertight run which eliminates the requirement of additional tray jointing adhesives (taping etc.) on site.

Uses:

- At the abutment of a flat roof with a cavity wall

- At the abutment of a lean-to or mono pitch roof with a cavity wall

- On external walls – not exceeding 102.5mm in thickness – built from standard brickwork, blockwork or stone

- Clear cavity widths of between 50mm-125mm

Inter-loc Horizontal Cavity Tray - 4 Brick - 150mm Lead Attached

Preformed leaded horizontal cavity tray system for new build and existing walls.

Featuring integral interlocking lapped joints to securely join cavity tray lengths together and create a watertight run which eliminates the requirement of additional tray jointing adhesives (taping etc.) on site.

Uses:

- At the abutment of a flat roof with a cavity wall

- At the abutment of a lean-to or mono pitch roof with a cavity wall

- On external walls – not exceeding 102.5mm in thickness – built from standard brickwork, blockwork or stone

- Clear cavity widths of between 50mm-125mm

Inter-loc Horizontal Cavity Tray - 4 Brick - 300mm Lead Attached

Preformed leaded horizontal cavity tray system for new build and existing walls.

Featuring integral interlocking lapped joints to securely join cavity tray lengths together and create a watertight run which eliminates the requirement of additional tray jointing adhesives (taping etc.) on site.

Uses:

- At the abutment of a flat roof with a cavity wall

- At the abutment of a lean-to or mono pitch roof with a cavity wall

- On external walls – not exceeding 102.5mm in thickness – built from standard brickwork, blockwork or stone

- Clear cavity widths of between 50mm-125mm

Inter-loc Horizontal Cavity Tray External Corner - 150mm Lead Attached

Preformed leaded horizontal cavity tray system for new build and existing walls.

Featuring integral interlocking lapped joints to securely join cavity tray lengths together and create a watertight run which eliminates the requirement of additional tray jointing adhesives (taping etc.) on site.

Inter-loc Horizontal Cavity Tray External Corner - 300mm Lead Attached

Preformed leaded horizontal cavity tray system for new build and existing walls.

Featuring integral interlocking lapped joints to securely join cavity tray lengths together and create a watertight run which eliminates the requirement of additional tray jointing adhesives (taping etc.) on site.

Inter-loc Horizontal Cavity Tray Internal Corner - 150mm Lead Attached

Preformed leaded horizontal cavity tray system for new build and existing walls.

Featuring integral interlocking lapped joints to securely join cavity tray lengths together and create a watertight run which eliminates the requirement of additional tray jointing adhesives (taping etc.) on site.

Inter-loc Horizontal Cavity Tray Internal Corner - 300mm Lead Attached

Preformed leaded horizontal cavity tray system for new build and existing walls.

Featuring integral interlocking lapped joints to securely join cavity tray lengths together and create a watertight run which eliminates the requirement of additional tray jointing adhesives (taping etc.) on site.