Joist Hangers

Joist Hanger with Adjustable Height Strap - 100mm x 270mm

Height adjustable joist hanger for supporting timber joists from timber members.

Product Information:

- A galvanised joist hanger that provides great support with ease of installation.

- Wider strap provides more surface area on the supporting timber and allows increased nail spacing, enhancing the performance of the critical hanger-to-support part of the connection.

- Minimum and maximum nailing schedules are stamped into the strap providing correct installation information for site operatives.

- Speed-prong holds the hanger in position to allow easier attachment. The installer no longer has to try to hold hanger, joist and nail with one hand and swing a hammer with the other!

- JHA270 range features a location tab which allows easier alignment of the hanger.

- The model number and size is stamped into the seat of the hanger for easy identification, even after installation.

- Pre-galvanised mild steel.

Suitable on:

- Solid sawn timber joists.

When to use:

- Face Fix

- Wrap Over

Joist Hanger with Adjustable Height Strap - 100mm x 450mm

Height adjustable joist hanger for supporting timber joists from timber members.

Product Information:

- A galvanised joist hanger that provides great support with ease of installation.

- Wider strap provides more surface area on the supporting timber and allows increased nail spacing, enhancing the performance of the critical hanger-to-support part of the connection.

- Minimum and maximum nailing schedules are stamped into the strap providing correct installation information for site operatives.

- Speed-prong holds the hanger in position to allow easier attachment. The installer no longer has to try to hold hanger, joist and nail with one hand and swing a hammer with the other!

- JHA450 range features longer legs.

- The model number and size is stamped into the seat of the hanger for easy identification, even after installation.

- Pre-galvanised mild steel.

Suitable on:

- Solid sawn timber joists.

When to use:

- Face Fix

- Wrap Over

Joist Hanger with Adjustable Height Strap - 150mm x 450mm

Height adjustable joist hanger for supporting timber joists from timber members.

Product Information:

- A galvanised joist hanger that provides great support with ease of installation.

- Wider strap provides more surface area on the supporting timber and allows increased nail spacing, enhancing the performance of the critical hanger-to-support part of the connection.

- Minimum and maximum nailing schedules are stamped into the strap providing correct installation information for site operatives.

- Speed-prong holds the hanger in position to allow easier attachment. The installer no longer has to try to hold hanger, joist and nail with one hand and swing a hammer with the other!

- JHA450 range features longer legs.

- The model number and size is stamped into the seat of the hanger for easy identification, even after installation.

- Pre-galvanised mild steel.

Suitable on:

- Solid sawn timber joists.

When to use:

- Face Fix

- Wrap Over

3.75 x 30mm Galv Simpsons Square Twist Nails (Sheradised) - 1kg

N3.75 square twist nails are tested and approved for use when installing Simpson Strong-Tie connectors including joist hangers, brackets and straps. CE marked to EN14592.

Product Information:

Sheradised coating suitable for service class 2 environments.

Suitable On:

- Fastening hangers with straps

- Fastening hangers with top flanges

- Fastening ZS clip for I-beams

- Common Applications

- Fastening connectors to timber including solid wood, composite lumber and glued-laminated timber.

Pack Size: 1 kg

3.75 x 30mm Galv Simpsons Square Twist Nails (Sheradised) - 5kg

N3.75 square twist nails are tested and approved for use when installing Simpson Strong-Tie connectors including joist hangers, brackets and straps. CE marked to EN14592.

Product Information:

Sheradised coating suitable for service class 2 environments.

Suitable On:

- Fastening hangers with straps

- Fastening hangers with top flanges

- Fastening ZS clip for I-beams

- Common Applications

- Fastening connectors to timber including solid wood, composite lumber and glued-laminated timber.

Pack Size: 5 kg

Truss Clip - 38mm

The TCP truss clip attaches girders, trusses and rafters to wall plates to provide wind restraint.

Product Information:

- TCP Truss Clips may be used for general purposes, to resist uplift wherever one member crosses another.

- Speed prong provides temporary attachment for ease of installation.

- Obround holes for easier nail driving.

- Pre-galvanised mild steel

Mini Hanger - 47mm

The MHA is a galvanised mini joist hanger suitable for use with regularised timber, rough sawn timber, I-Joists and LVL.

Ideally suited for small timber sections and timber members; such as trimmers and ceiling joists.

Product Information:

- Pre-galvanised mild steel.

47mm Simpsons Ridge Rafter Connector

The RR ridge rafter connector provides alignment control and correct nailing locations. The RR may be used with any rafter slope up to 30°.

Material:

- Pre-galvanised mild steel

Truss Hanger Mono - 47mm

The THM (Truss Hanger Mono) is a joist hanger for supporting mono trusses from timber members.

Product Information:

- Features speed Prongs for ease of installation.

- Pre-galvanised mild steel.

Truss Clip - 47mm

The TCP truss clip attaches girders, trusses and rafters to wall plates to provide wind restraint.

Product Information:

- TCP Truss Clips may be used for general purposes, to resist uplift wherever one member crosses another.

- Speed prong provides temporary attachment for ease of installation.

- Obround holes for easier nail driving.

- Pre-galvanised mild steel

Joist Hanger with Adjustable Height Strap - 47mm x 270mm

Height adjustable joist hanger for supporting timber joists from timber members.

Product Information:

- A galvanised joist hanger that provides great support with ease of installation.

- Wider strap provides more surface area on the supporting timber and allows increased nail spacing, enhancing the performance of the critical hanger-to-support part of the connection.

- Minimum and maximum nailing schedules are stamped into the strap providing correct installation information for site operatives.

- Speed-prong holds the hanger in position to allow easier attachment. The installer no longer has to try to hold hanger, joist and nail with one hand and swing a hammer with the other!

- JHA270 range features a location tab which allows easier alignment of the hanger.

- The model number and size is stamped into the seat of the hanger for easy identification, even after installation.

- Pre-galvanised mild steel.

Suitable on:

- Solid sawn timber joists.

Joist Hanger with Adjustable Height Strap - 75mm x 270mm

Height adjustable joist hanger for supporting timber joists from timber members.

Product Information:

- A galvanised joist hanger that provides great support with ease of installation.

- Wider strap provides more surface area on the supporting timber and allows increased nail spacing, enhancing the performance of the critical hanger-to-support part of the connection.

- Minimum and maximum nailing schedules are stamped into the strap providing correct installation information for site operatives.

- Speed-prong holds the hanger in position to allow easier attachment. The installer no longer has to try to hold hanger, joist and nail with one hand and swing a hammer with the other!

- JHA270 range features a location tab which allows easier alignment of the hanger.

- The model number and size is stamped into the seat of the hanger for easy identification, even after installation.

- Pre-galvanised mild steel.

Suitable on:

- Solid sawn timber joists.

When to use:

- Face Fix

- Wrap Over

Joist Hanger with Adjustable Height Strap - 75mm x 450mm

Height adjustable joist hanger for supporting timber joists from timber members.

Product Information:

- A galvanised joist hanger that provides great support with ease of installation.

- Wider strap provides more surface area on the supporting timber and allows increased nail spacing, enhancing the performance of the critical hanger-to-support part of the connection.

- Minimum and maximum nailing schedules are stamped into the strap providing correct installation information for site operatives.

- Speed-prong holds the hanger in position to allow easier attachment. The installer no longer has to try to hold hanger, joist and nail with one hand and swing a hammer with the other!

- JHA450 range features longer legs.

- The model number and size is stamped into the seat of the hanger for easy identification, even after installation.

- Pre-galvanised mild steel.

Suitable on:

- Solid sawn timber joists.

When to use:

- Face Fix

- Wrap Over

Joist Hanger with Adjustable Height Strap - 91mm x 270mm

Height adjustable joist hanger for supporting timber joists from timber members.

Product Information:

- A galvanised joist hanger that provides great support with ease of installation.

- Wider strap provides more surface area on the supporting timber and allows increased nail spacing, enhancing the performance of the critical hanger-to-support part of the connection.

- Minimum and maximum nailing schedules are stamped into the strap providing correct installation information for site operatives.

- Speed-prong holds the hanger in position to allow easier attachment. The installer no longer has to try to hold hanger, joist and nail with one hand and swing a hammer with the other!

- JHA270 range features a location tab which allows easier alignment of the hanger.

- The model number and size is stamped into the seat of the hanger for easy identification, even after installation.

- Pre-galvanised mild steel.

Suitable on:

- Solid sawn timber joists.

When to use:

- Face Fix

- Wrap Over

Joist Hanger with Adjustable Height Strap - 91mm x 450mm

Height adjustable joist hanger for supporting timber joists from timber members.

Product Information:

- A galvanised joist hanger that provides great support with ease of installation.

- Wider strap provides more surface area on the supporting timber and allows increased nail spacing, enhancing the performance of the critical hanger-to-support part of the connection.

- Minimum and maximum nailing schedules are stamped into the strap providing correct installation information for site operatives.

- Speed-prong holds the hanger in position to allow easier attachment. The installer no longer has to try to hold hanger, joist and nail with one hand and swing a hammer with the other!

- JHA450 range features longer legs.

- The model number and size is stamped into the seat of the hanger for easy identification, even after installation.

- Pre-galvanised mild steel.

Suitable on:

- Solid sawn timber joists.

When to use:

- Face Fix

- Wrap Over

Joist Hanger for Masonry - 100mm x 50mm

The JHM range of joist hangers can be used to connect solid sawn joists, trusses and engineered joists to masonry walls or steel beams.

Product Information:

- Built-in inspection slot at the base of the hanger to aid inspection from the ground

- Top flange provides widest area in contact with masonry support allowing superior performance.

- Embossments on JHM stiffen top flange and holes allow improved mortar keying.

- JHM side flange on deeper hangers is much higher than traditional style, providing greatly enhanced resistance to joist rotation.

- Pre-galvanised mild steel.

Joist Hanger for Masonry - 150mm x 100mm

The JHM range of joist hangers can be used to connect solid sawn joists, trusses and engineered joists to masonry walls or steel beams.

Product Information:

- Built-in inspection slot at the base of the hanger to aid inspection from the ground

- Top flange provides widest area in contact with masonry support allowing superior performance.

- Embossments on JHM stiffen top flange and holes allow improved mortar keying.

- JHM side flange on deeper hangers is much higher than traditional style, providing greatly enhanced resistance to joist rotation.

- Pre-galvanised mild steel.

Joist Hanger for Masonry - 150mm x 75mm

The JHM range of joist hangers can be used to connect solid sawn joists, trusses and engineered joists to masonry walls or steel beams.

Product Information:

- Built-in inspection slot at the base of the hanger to aid inspection from the ground

- Top flange provides widest area in contact with masonry support allowing superior performance.

- Embossments on JHM stiffen top flange and holes allow improved mortar keying.

- JHM side flange on deeper hangers is much higher than traditional style, providing greatly enhanced resistance to joist rotation.

- Pre-galvanised mild steel.

Joist Hanger for Masonry - 175mm x 50mm

The JHM range of joist hangers can be used to connect solid sawn joists, trusses and engineered joists to masonry walls or steel beams.

Product Information:

- Built-in inspection slot at the base of the hanger to aid inspection from the ground

- Top flange provides widest area in contact with masonry support allowing superior performance.

- Embossments on JHM stiffen top flange and holes allow improved mortar keying.

- JHM side flange on deeper hangers is much higher than traditional style, providing greatly enhanced resistance to joist rotation.

- Pre-galvanised mild steel.

Joist Hanger for Masonry - 175mm x 75mm

The JHM range of joist hangers can be used to connect solid sawn joists, trusses and engineered joists to masonry walls or steel beams.

Product Information:

- Built-in inspection slot at the base of the hanger to aid inspection from the ground

- Top flange provides widest area in contact with masonry support allowing superior performance.

- Embossments on JHM stiffen top flange and holes allow improved mortar keying.

- JHM side flange on deeper hangers is much higher than traditional style, providing greatly enhanced resistance to joist rotation.

- Pre-galvanised mild steel.