Joint-It Simple Paving Jointing Compound Mortar 20kg - Dark Grey

Joint It Jointing Mortar For Slabs / Paving - Grey - 20kg

Joint-It Simple is a ready-mixed, permeable, jointing compound that can be applied in all weathers.

Product Information:

STEP 1: PREPARATION
Make sure all joints are clear of any dirt, oil, grease and debris,
Make sure all joints are cleaned out to a minimum depth of 20mm and a width of at least 3mm,

STEP 2: PRE-WET
Soak the area well prior to opening and spreading Joint-It Simple,

STEP 3: POUR
Open the tub and immediately pour Joint-It Simple onto the area,

STEP 4 : WORK-IT-IN
Using a squeegee or street broom, spread Joint-It Simple evenly,
Work-it-in so that it goes deeply into the joints and is well compacted,

STEP 5: ADD MORE WATER
Add more water sparingly to help Joint-It Simple flow into the paving joints,
Work diagonally across the joints to make sure that Joint-It Simple has penetrated all of the paving joints,

STEP 6: FINAL CLEANING
Clean the surface carefully with a fine-hair broom so that all Joint-It is removed,
Always sweep diagonally across the joints,
Any residual materials can be swept off after application using a soft broom.

Joint It Jointing Mortar For Slabs / Paving - Neutral - 20kg

Joint-It Simple is a ready-mixed, permeable, jointing compound that can be applied in all weathers.

Product Information:

STEP 1: PREPARATION
Make sure all joints are clear of any dirt, oil, grease and debris,
Make sure all joints are cleaned out to a minimum depth of 20mm and a width of at least 3mm,

STEP 2: PRE-WET
Soak the area well prior to opening and spreading Joint-It Simple,

STEP 3: POUR
Open the tub and immediately pour Joint-It Simple onto the area,

STEP 4 : WORK-IT-IN
Using a squeegee or street broom, spread Joint-It Simple evenly,
Work-it-in so that it goes deeply into the joints and is well compacted,

STEP 5: ADD MORE WATER
Add more water sparingly to help Joint-It Simple flow into the paving joints,
Work diagonally across the joints to make sure that Joint-It Simple has penetrated all of the paving joints,

STEP 6: FINAL CLEANING
Clean the surface carefully with a fine-hair broom so that all Joint-It is removed,
Always sweep diagonally across the joints,
Any residual materials can be swept off after application using a soft broom.

Joint It Jointing Mortar For Slabs / Paving - Black - 20kg

Joint-It Simple is a ready-mixed, permeable, jointing compound that can be applied in all weathers.

Product Information:

STEP 1: PREPARATION
Make sure all joints are clear of any dirt, oil, grease and debris,
Make sure all joints are cleaned out to a minimum depth of 20mm and a width of at least 3mm,

STEP 2: PRE-WET
Soak the area well prior to opening and spreading Joint-It Simple,

STEP 3: POUR
Open the tub and immediately pour Joint-It Simple onto the area,

STEP 4 : WORK-IT-IN
Using a squeegee or street broom, spread Joint-It Simple evenly,
Work-it-in so that it goes deeply into the joints and is well compacted,

STEP 5: ADD MORE WATER
Add more water sparingly to help Joint-It Simple flow into the paving joints,
Work diagonally across the joints to make sure that Joint-It Simple has penetrated all of the paving joints,

STEP 6: FINAL CLEANING
Clean the surface carefully with a fine-hair broom so that all Joint-It is removed,
Always sweep diagonally across the joints,
Any residual materials can be swept off after application using a soft broom.