Joint For EPDM Roofing System Trim - Black

Joist Hanger with Adjustable Height Strap - 47mm x 270mm

Height adjustable joist hanger for supporting timber joists from timber members.

Product Information:

- A galvanised joist hanger that provides great support with ease of installation.

- Wider strap provides more surface area on the supporting timber and allows increased nail spacing, enhancing the performance of the critical hanger-to-support part of the connection.

- Minimum and maximum nailing schedules are stamped into the strap providing correct installation information for site operatives.

- Speed-prong holds the hanger in position to allow easier attachment. The installer no longer has to try to hold hanger, joist and nail with one hand and swing a hammer with the other!

- JHA270 range features a location tab which allows easier alignment of the hanger.

- The model number and size is stamped into the seat of the hanger for easy identification, even after installation.

- Pre-galvanised mild steel.

Suitable on:

- Solid sawn timber joists.

Rubber Cover 4.57mts Wide - For Rubber Roofing

RubberCover 1.14mm EPDM flat roof membrane offers simple installation.

EPDM offers unmatched longevity at a low cost, and remains flexible and durable with over 50 year life expectancy.

Product Information:

- Fast and easy to install

- No roofing experience required

- 50-year life expectancy

- Thickness: 1.14mm

(Sold per metre) x 4.57mts wide: eg. 1metre x 4.57mts , 2 metre x 4.57mts , 3 metre x 4.57mts etc (up to 30mts maximum)

PTGV Redwood Cladding 13mm x 100mm - 3 Metres - Sold in Packs of 10

Ideal for interior decorative purposes on walls and ceilings.

Product Information:

- Country of origin: Sweden

- Material: European redwood spruce

- Kiln dried: Moisture content 15% > 18%

- Surface finish: Planed moulded

- Application: Profiled for horizontal or vertical fixing (PTG / V joint)

- Machined from / size: 13mm x 100mm

- Finished size: 8.5mm x 95mm

- Coverage: 87mm (11.49 metres / per sq metre)

- Length: 3mts

- Sold in packs of 10 pieces

OSB3 T & G 18mm External Grade Boards

Oriented Strand Board (OSB) is an engineered wood based panel board where strands of wood are laid in cross-oriented layers and glued with an ECO resin.

This results in a strong board that resists moisture, is versatile, and suitable for structural use in humid conditions.

Product Information:

- Profile: Tongue & groove

- OSB3: Suitable for fibreglass roofing

- Size: 2400mm x 600mm

- Thickness: 18mm

18mm OSB3 External Grade Composite Board - 2440mm x 1220mm

Oriented Strand Board (OSB) is an engineered wood based panel board where strands of wood are laid in cross-oriented layers and glued with an ECO resin. This results in a strong board that resists moisture, is versatile, and suitable for structural use in humid conditions.

Product Information:

- OSB3: Suitable for fibreglass roofing.

- Also known as Sterling Board

- Size: 2440mm x 1220mm.

- Thickness: 18mm

Cement 25kg Supplied in a Weatherproof Plastic Bag

O'Brien premium grade cement for jobs which require higher strength cement, such as screeds, concrete, plastering and mortar, this premium grade product is ideal.

Product Information:

- Smooth, uniform finish, and impressive drying performance.

- Premium grade O'Brien cement with 42.5N strength which offers exceptional performance.

- Supplied in a plastic based bag.

FWX Fascia Corner Plastic (uPVC) - Anthracite

Using cap over fascia boards is the perfect solution for improving existing wood fascia boards without fully replacing them.

Easy to joint together with a Freefoam (300mm long) FWX corner for 10mm thick boards.

Product Information:

- Manufacturer: Freefoam.

- Type: FWX cap over fascia corner.

- Finish: Smooth.

- Colour: Anthracite.

- Length: 300mm.

60mm x 6mm UPVC Pencil Round Architrave 5mtr - White

One rounded edge (pencil edge) uPVC trim 6mm thick x 60mm wide x 5mts long.

Product Information:

- Manufacturer: Freefoam

- Type: FA45 architrave trim

- Finish: Smooth

- Colours: Smooth White

- Width: 60mm

- Length: 5mts

Bond and Seal Black 300ml - For Rubber Roofing

A specially formulated sealant / adhesive which is designed for maximum adhesion to single ply membranes, which can be used to bond rubber roofing edge trim, external and internal corners, end caps and joint clips to EPDM membranes.

Product Information:

- Application: By Sealant gun.

- Colour: Black.

- Tube Size: 300ml.