Simpsons Heavy Duty Angle Bracket - 70mm x 90mm

Be the first to review this product

Simpson Strong-Tie ABR90 Heavy Duty Angle Bracket - 70mm x 90mm

Reinforced angle brackets are suitable for structural applications in framing and wood-frame houses.

Material:

- Pre-galvanised mild steel.

Benefits:

Load capacity in all directions
Improved capacities for full and partial nailing

Suitable On:

- Supporting member: solid wood, glued-laminated wood, concrete, steel, etc.

- Supported member: solid wood, composite lumber, glued-laminated wood, triangular trusses, profiles, etc.

When to Use:

- Fastening of small trusses.

- Cladding plates, cladding uprights.

- Rafter anchors, cantilevers, headers, etc.

SKU: E2-2.5-7090

Availability: Out of stock

£2.16 ex VAT

Qty:

i h

Overview
Specifications
Reviews
Disclaimer

Simpson Strong-Tie ABR90 Heavy Duty Angle Bracket - 70mm x 90mm

Reinforced angle brackets are suitable for structural applications in framing and wood-frame houses.

Material:

- Pre-galvanised mild steel.

Benefits:

Load capacity in all directions
Improved capacities for full and partial nailing

Suitable On:

- Supporting member: solid wood, glued-laminated wood, concrete, steel, etc.

- Supported member: solid wood, composite lumber, glued-laminated wood, triangular trusses, profiles, etc.

When to Use:

- Fastening of small trusses.

- Cladding plates, cladding uprights.

- Rafter anchors, cantilevers, headers, etc.

Products specifications

Product Type	Angle Bracket
Finish	Galvanised
Colour Group	Silver

0 review(s)

Write your own review Close

Product can be reviewed only after purchasing it
Only registered users can write reviews

The product images displayed are for illustrative purposes only and may not fully represent the actual product.

The recommendations regarding the application and intended use of the products are based on our current knowledge and experience, assuming proper storage, handling, and application under standard conditions. All product specifications, information, and data provided on the website are subject to change. While the information provided is believed to be accurate and reliable, it is offered without any guarantee, warranty, or responsibility of any kind.

Customers who bought this item also bought

47mm Truss Clip

TCP47

Truss Clip - 47mm

The TCP truss clip attaches girders, trusses and rafters to wall plates to provide wind restraint.

Product Information:

- TCP Truss Clips may be used for general purposes, to resist uplift wherever one member crosses another.

- Speed prong provides temporary attachment for ease of installation.

- Obround holes for easier nail driving.

- Pre-galvanised mild steel

£0.54 ex VAT

47mm Simpsons Mini Timber Hanger

MHA47

Mini Hanger - 47mm

The MHA is a galvanised mini joist hanger suitable for use with regularised timber, rough sawn timber, I-Joists and LVL.

Ideally suited for small timber sections and timber members; such as trimmers and ceiling joists.

Product Information:

- Pre-galvanised mild steel.

£0.95 ex VAT

75mm x 75mm (Nominal) Green Treated Fence Post 3mtr

75X75TR3

UC3 Treated Sawn Timber - 75mm x 75mm - 3 Metres

Treated 3" x 3" Sawn green fence post.

Product Information: Premium Quality!

- Country of origin: UK

- Species: Spruce

- Surface finish: Rough sawn

- Treatment: UC3

- Colour: Green

- Machined from / size: 75mm x 75mm

- Length: 3mts

£7.92 ex VAT

5 x 90mm Velocity Premium Multi Purpose Screw - (100)

50090VY

5.0 x 90mm Velocity Premium Multi Purpose Screw (Pack of 100)

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications.

Product Information:

- Dual angle thread designed for superior hold

- Partially threaded stops the timber jacking.

- Rapid drive twist cut enhances drive performance

- Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque.

£8.98 ex VAT

3.75 x 30mm Galv Simpsons Square Twist Nails (Sheradised) - 1kg

N3.75X30SH-1KG

3.75 x 30mm Galv Simpsons Square Twist Nails (Sheradised) - 1kg

N3.75 square twist nails are tested and approved for use when installing Simpson Strong-Tie connectors including joist hangers, brackets and straps. CE marked to EN14592.

Product Information:

Sheradised coating suitable for service class 2 environments.

Suitable On:

- Fastening hangers with straps

- Fastening hangers with top flanges

- Fastening ZS clip for I-beams

- Common Applications

- Fastening connectors to timber including solid wood, composite lumber and glued-laminated timber.

Pack Size: 1 kg

£8.99 ex VAT

6.7 x 100mm In-Dex Screw (Box of 50)

100IN

Timber Frame Construction & Landscaping Screws - 6.7 x 100mm

Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray test, this screw is ideal for external applications.

Product Information:

- Hex head countersunk with a fixed washer

- Long lasting plating withstands up to 1,000 hours salt spray resistance in accordance to BS EN 9227:2012

- Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion

- Helix shank for removing debris and to improve clamping

- 50° deep single thread to provide a secure fixing with high pull-out resistance

- Single slash point to reduce torque and the risk of timber splitting at low edge distance

- 25° sharp point and single lead for a fast start and improved thread acceptance

£11.08 ex VAT

4.5 x 50mm Decking Screw (Box of 250)

50C2D250BX

4.5 x 50mm Decking Screw (Box of 250)

This decking screw uses the C2 twin-cut technology.

Coated with a multi-layer patented corrosion resistant plating to withstand up to 1,000 hours in a salt spray cabi net.

This new and innovative designed screw enables the screw to rapidly penetrate into the timber, cleanly countersink, and securely clamp the decking board firmly to the joists.

Product Information:

- Strengthened head to prevent shearing when using an impact tool

- Ribs under the head to improve countersinking

- Helix shank for removing debris and to benefit clamping

- Coated with a patented multi-layer corrosion resistant plating which withstands up to 1,000 hours salt spray

- Patented twin cut technology for rapid "pick-up" which reduces timber splitting

£7.56 ex VAT

Onduline Bitumen Corrugated Roof Sheet - Green - 2mtr x 950mm

UOSGR

Onduline Corrugated Roofing Sheet Green - 2mts x 950mm x 3mm

Onduline is an extremely tough, lightweight, corrugated roofing and wall cladding material manufactured utilising a base board produced from recycled cellulose fibres which is saturated with bitumen under intense pressure and heat.

Onduline sheets are finished with a colour pigment and resin impregnation process which stains the colour into the sheet to provide excellent colour retention properties and enhanced U.V. resistance.

Product Information:

- Bituminous green corrugated roofing system

- Thermal resistance R value: 0.04mK/W

- Corrugation height: 38mm

- Corrugation width: 95mm

- Recommendation: 30 fixings per sheet

- Length: 2000mm

- Width: 950mm

- Thickness: 3mm

- Cover width: 855mm

- Colour: Green

£22.83 ex VAT