Grange Superior Lap Fence Panel Pressure Treated Green 1.8m x 1.83m

O'Brien Post Mix 20kg Bag

O’Brien Cement Post Mix is a simple to use rapid setting concrete mix for fixing posts in the ground. It is pre-mixed and blended and contains cement, dried aggregates and admixtures. The cement used is O’Brien Cement manufactured in Ireland and conforms to I.S EN 197-1 2011.

Product Information:

1. 1. Dig a hole to required size for post, half fill the hole with water and place the post in the hole,
2. 2. Tip the pre-mixed aggregate uniformly into the hole around the post, until it is above the level of water,
3. 3. If any dry powder remains visible at this stage, add additional water until absorbed by the material,
4. 4. Adjust the post into position and support appropriately until material set occurs, which takes approximately 10 minutes.

Galvanised Bracket For Securing Fence Panels - 46mm

Simply attach to the fence posts slide in the panel and secure in position.

Product Information:

- Material: Steel galvanized.

- Fixing: Four brackets required per panel.

- Secure with corrosion resistant screws or nails.

- Width: 46mm.

UC3 Treated Sawn Timber - 75mm x 75mm - 2.4 Metres

Treated 3" x 3" Sawn green fence post.

Product Information: Premium Quality!

- Country of origin: UK

- Species: Spruce

- Surface finish: Rough sawn

- Treatment: UC3

- Colour: Green

- Machined from / size: 75mm x 75mm

- Length: 2.4mts

UC3 Pressure Treated Sawn Timber - 22mm x 175mm - 4.8 Metres

This timber is mainly used for fencing but has other suitable applications.

Product Information:

- Country of origin: UK

- Species: Spruce

- Grade: Ungraded

- Surface finish: Sawn

- Colour: Green

- Treatment: UC3

- Size: 22mm x 175mm

- Length: 4.8mts

35mm x 35mm Pine Cushion Corner Angle - 2.4mts

Angles are an effective solution to add a finishing touch to a wide variety of projects. Angles can help to conceal screw fixings, slight imperfections and rough edges on a variety of different surfaces such as worktops, shelving and where to two boards join.

Product Information:

- The cushion corner adds a slightly rounded edge to add some softness to the corners

- Pine can be easily installed using adhesive, screws or pins depending on the size of the product and the end use

- Angles are a standalone product which can be used on its own

- This product is made to the highest quality.

- Made using a lightweight, straight grained softwood which is easy to work with. Due to its strength, elasticity and relatively low cost, pine is a popular choice to be used in a variety of projects.

- To finish off pine, lightly sand before applying wood stain, varnish or a lacquer.

30mm x 30mm Pine Cushion Corner Angle - 2.4mts

Angles are an effective solution to add a finishing touch to a wide variety of projects. Angles can help to conceal screw fixings, slight imperfections and rough edges on a variety of different surfaces such as worktops, shelving and where to two boards join.

Product Information:

- The cushion corner adds a slightly rounded edge to add some softness to the corners

- Pine can be easily installed using adhesive, screws or pins depending on the size of the product and the end use

- Angles are a standalone product which can be used on its own

- This product is made to the highest quality.

- Made using a lightweight, straight grained softwood which is easy to work with. Due to its strength, elasticity and relatively low cost, pine is a popular choice to be used in a variety of projects.

- To finish off pine, lightly sand before applying wood stain, varnish or a lacquer.

Elite Grooved Fence Panel H Post

This Elite grooved fence panel H post from Grange Fencing is available in 2 different sizes & made from pressure-treated timber for long-lasting use.

Gap for fence panel is 43mm, please check width of your fence post for fit before purchase.

Dimensions (H x W x D) - 240 x 9 x 9 (cm)

PTGV Redwood Cladding 13mm x 100mm - 2.4 Metres - Sold in Packs of 10

Ideal for interior decorative purposes on walls and ceilings.

Product Information:

- Country of origin: Sweden

- Material: European redwood spruce

- Kiln dried: Moisture content 15% > 18%

- Surface finish: Planed moulded

- Application: Profiled for horizontal or vertical fixing (PTG / V joint)

- Machined from / size: 13mm x 100mm

- Finished size: 8.5mm x 95mm

- Coverage: 87mm (11.49 metres / per sq metre)

- Length: 2.4mts

- Sold in packs of 10 pieces

UC3 Treated Sawn Timber - 100mm x 100mm - 2.4 Metres

Treated 4" x 4" Sawn green fence post.

Product Information:

- Country of origin: UK

- Species: Spruce

- Surface finish: Rough sawn

- Treatment: UC3

- Colour: Green

- Machined from / size: 100mm x 100mm

- Length: 2.4mts

25mm x 38mm Roofing Batten Treated - 4.8 metres

Roofing batten type A produced in Sweden BS 8417 Certified.

Product Information:

- Country of origin: Sweden

- Species: Spruce

- Grade: BS 8417 certified

- Moisture content: Kiln dried (18% approx.)

- Treatment: UC2

- Colour: Green

- Surface finish: Sawn

- Machined from / size: 25mm x 38mm

- Length: 4.8mts