Grange Elite Meloir Fence Panel Green Pressure Treated - 1.5m x 1.8m

Galvanised Bracket For Securing Fence Panels - 46mm

Simply attach to the fence posts slide in the panel and secure in position.

Product Information:

- Material: Steel galvanized

- Fixing: Four brackets required per panel

- Secure with corrosion resistant screws or nails

- Width: 46mm

UC3 Treated Sawn Timber - 75mm x 75mm - 1.8 Metres

Treated 3" x 3" Sawn green fence post.

Product Information: Premium Quality!

- Country of origin: UK

- Species: Spruce

- Surface finish: Rough sawn

- Treatment: UC3

- Colour: Green

- Machined from / size: 75mm x 75mm

- Length: 1.8mts

O'Brien Post Mix 20kg Bag

O’Brien Cement Post Mix is a simple to use rapid setting concrete mix for fixing posts in the ground. It is pre-mixed and blended and contains cement, dried aggregates and admixtures. The cement used is O’Brien Cement manufactured in Ireland and conforms to I.S EN 197-1 2011.

Product Information:

1. 1. Dig a hole to required size for post, half fill the hole with water and place the post in the hole,
2. 2. Tip the pre-mixed aggregate uniformly into the hole around the post, until it is above the level of water,
3. 3. If any dry powder remains visible at this stage, add additional water until absorbed by the material,
4. 4. Adjust the post into position and support appropriately until material set occurs, which takes approximately 10 minutes.

Boltdown Shoe - Hot Dipped Galvanised - 75mm

Bolt down fence post shoes are a quick and easy way to erect fencing and garden posts as they require no digging or concreting into place, saving time and money. Designed to be fixed down onto an existing concrete base or wall and are perfect for patio fencing, decking, pergolas or car ports. The bolt secure version features 2x 8mm carriage bolts that tighten and clamp the post firmly into the post holder section to prevent any post movement.

Product Information:

- Prevents against post rot and decay as it will hold the base of the post above ground level

- Hot dipped galvanised for maximum rust protection

- Can be painted over

4.0 x 50mm Velocity Premium Multi Purpose Screw (Pack of 200)

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications.

Product Information:

- Dual angle thread designed for superior hold

- Partially threaded stops the timber jacking.

- Rapid drive twist cut enhances drive performance

- Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque.