FlexiProof Raised Kerb External Corner For Integra Trim - Black

EPDM Raised Kerb Trim - Gloss Black - 2.5 Metres

Product Information:

- Easily installed, looks great and delivers an effective 20mm water check upstand along flat roof perimeters – no need to fit a timber upstand!

- Pre-fitted with a 10mm x 15mm foam compression strip

- High-quality cellular uPVC extrusion

- Fully waterproof

- Long-lasting performance

- Convenient 2.5m length

- Fully recyclable

Raised Kerb Trim Internal Corner Profile - Gloss Black

Designed to match the profile of the Raised Kerb Trim

Product Information:

- Easily join two lengths of Raised Kerb Trim wherever they meet on an internal right angle

- Designed and manufactured to snugly fit onto Raised Kerb Trim

- Quickly glues into place

- Low profile, seamless finish

- 20mm (W) x 100mm (D)

EPDM Raised Kerb Trim - Gloss Black - 2.5 Metres

Product Information:

- Easily installed, looks great and delivers an effective 20mm water check upstand along flat roof perimeters – no need to fit a timber upstand!

- Pre-fitted with a 10mm x 15mm foam compression strip

- High-quality cellular uPVC extrusion

- Fully waterproof

- Long-lasting performance

- Convenient 2.5m length

- Fully recyclable

Rubber Cover 6.10mts Wide - For Rubber Roofing

RubberCover 1.14mm EPDM flat roof membrane offers simple installation.

EPDM offers unmatched longevity at a low cost, and remains flexible and durable with over 50 year life expectancy.

Product Information:

- Fast and easy to install

- No roofing experience required

- 50-year life expectancy

- Thickness: 1.14mm

(Sold per metre) x 6.10mts wide: eg. 1metre x 6.10mts , 2 metre x 6.10mts , 3 metre x 6.10mts etc (up to 30mts maximum)

EPDM Gutter Drip Trim - Gloss Black - 2.5 Metres

This gutter trim can be used on a roof edge to direct water drainage into a gutter.

Product Information:

- Easy to install, looks great and creates an effective gutter drip edge, every time!

- Front plate pre-fitted with a compression foam strip to create a watertight seal

- Sloping edge on back plate ensures easy front plate alignment

- High-quality cellular uPVC extrusion

- Fully waterproof

- Long-lasting performance

- Convenient 2.5m length

- Fully recyclable

Mini Mesh Galvanised Angle Plastering Bead 2.4mts

Product Information:

- Galvanized steel

- Small mesh forms a perfect key for plaster

- Ideal for a 2 to 3mm skim of plaster

- Promotes strength to corners of plaster board walls

Raised Kerb Trim Internal Corner Profile - Gloss Black

Designed to match the profile of the Raised Kerb Trim

Product Information:

- Easily join two lengths of Raised Kerb Trim wherever they meet on an internal right angle

- Designed and manufactured to snugly fit onto Raised Kerb Trim

- Quickly glues into place

- Low profile, seamless finish

- 20mm (W) x 100mm (D)

Gutter Drip Trim External Corner Profile - Gloss Black

Designed to match the profile of the Drip Trim

Product Information:

- Easily join two lengths of Gutter Drip Trim wherever they meet on an external right angle

- Designed and manufactured to snugly fit onto Gutter Drip Trim

- Quickly glues into place

- Low profile, seamless finish

- 40mm (W) x 76mm (D)

Dust (Limestone Dust) Jumbo Sling Bag 900kg approx

Delivered by one of our crane vehicles in a large nylon bag.

This is a natural product and colour variations can occur.

EPDM Water Based Deck Adhesive - 5 Litres

This high-strength, acrylic based adhesive allowing for fast, effective bonding of EPDM membranes to timber flat roofing substrates.

Product Information:

- The FlexiProof Water Based Deck Adhesive is a high strength, low odour adhesive used for bonding a one piece membrane sheet to a timber deck.

- Before applying the FlexiProof Water Based Deck Adhesive, all boards must be resistant to moisture and shouldn’t be sealed with adhesive repellent or any other non-absorbent substance.

- Size: 5 Litres (covers approx 15 to 20sqm)

Aerosol Spray Contact Adhesive for EPDM Roofing - 750ml

Fast-acting, spray-applied contact bonding adhesive for bonding EPDM to timber and non-absorbent surfaces.

Product Information:

- Contact Bonding Spray is a high-performance, fast-setting adhesive designed for bonding EPDM to various surfaces, including timber, glass, GRP, metal, and tissue-faced insulation.

- Size: 750ml

Thistle MultiFinish Plaster 25kg

Thistle Multi Finish plaster is the most popular universal skim finishes for common backgrounds; it can be used as part of a two-coat plaster system or directly on plaster board.

Thistle MultiFinish is an excellent choice for finishing most backgrounds. Quick and easy to apply, it has excellent workability and a reliable setting time. This makes it an ideal skim coat plaster for a durable decorative finish to plaster board walls or ce ilings, or for finishing over undercoat plasters.

It's very flexible making it an ideal choice for small repair jobs and patch work.

Using Thistle Multi Finish adds additional sound insulation to many of the GypWall CLASSIC systems of up to 2dB.