You have no items in your shopping cart.
6″ EPDM Cured Cover Tape - Cut Per Metre
6″ Cover Tape is used for stripping in metal edging, drip edges, gravel stops and fastening plates.
Product Information:
- It is used when joining two pieces of membrane where there is no overlap therefore a 3” splice/seam tape cannot be used.
- It is used to give a 3” cover join on both pieces of membrane, ensuring a completely waterproof seal and consists of a semi-cured EPDM strip laminated to a fully cured synthetic rubber-based pressure sensitive adhesive.
- It resists tearing, cracking and abrasion in all weather conditions and is suitable for all Standard EPDM Roofing Membranes.
- Sold per linear metre (1 Quantity = 1 Metre)
The product images displayed are for illustrative purposes only and may not fully represent the actual product.
The recommendations regarding the application and intended use of the products are based on our current knowledge and experience, assuming proper storage, handling, and application under standard conditions. All product specifications, information, and data provided on the website are subject to change. While the information provided is believed to be accurate and reliable, it is offered without any guarantee, warranty, or responsibility of any kind.
3" EPDM Seam Tape - Cut Per Metre
A double-sided tape designed for overlapping and joining two pieces of FlexiProof One Piece EPDM membrane or using as a flat roof repair tape.
- It can also be used to join EPDM membranes to lead and other smooth metal flashing details
9″ Uncured EPDM Flashing Tape - Cut Per Metre
FlexiProof™ 9” (225mm) Uncured Flashing Tape can be easily moulded and is highly adaptable to irregular shapes and surfaces.
- This self-curing tape is ideal for flashing and waterproofing of roof details such as pipes, corners, outlets, and other penetrations.
- 9 inches (225m) wide.
- Easily adaptable to irregular shapes and surfaces.
- Easy application with clear poly lining
- Self-curing and extremely flexible tape
8.5″ EPDM Circular Patch
A 216mm in diameter round piece of Uncured Flashing Tape, ideal for flashing outside corners or to be used as a cover patch for small repairs.
- Designed to flash outside corners or to be used as a cover patch for small repairs.
Primer for EPDM Roofing - 1 Litre
FlexiProof EPDM Primer is a solvent based product designed for one step cleaning and priming of EPDM and other suitable surfaces prior to application of pressure sensitive accessories.
- Perfect, cost-effective solution to help repair your roof from leaks or tears.
- Can be used for the application of pressure-sensitive tapes that you may want to add to your rubber roof.
- It is designed to be used with seam tape, cover tape, flashing tape, pipe seals and other accessories
- Size: 1 Ltr (covers 33 1/m @ 100mm Both Sides)
EPDM Contact Bonding Adhesive - 1 Litre
Used for bonding of the EPDM rubber roofing membrane at angle changes and verticals to absorbent and non-absorbent surfaces.
- FlexiProof Contact Bonding adhesive can be suitable for a wide range of surfaces e.g brickwork, timber, metal, GRP and concrete
- The FlexiProof Contact Bonding Adhesive is great for bonding EPDM membranes to horizontal and vertical roofs.
- Size: 1 Litre (covers approx 1 to 2 square meters)
EPDM Contact Bonding Adhesive - 2.5 Litres
- Size: 2.5 Litres (covers approx 4 to 5 square meters)