Fix & Fill Expanding Foam Hand Held - 750ml

Thunderbolt Masonry Fixing - Priced Per Bolt

Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone.

It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications.

The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt.

Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.

Product Information:

- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust.

- Remove any loose debris from the hole.

- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action.

- Tighten the Thunderbolt™ to secure the fixture firmly in place.

Steel Hex Nut - BZP - 8mm

Full nuts are applied to a matching male thread (examples include bolts, set screws and machine screws) and tighten two or more component parts together.

Product Information:

- Hexagon fits corresponding sockets and spanners.

Truss Hanger Mono - 47mm

The THM (Truss Hanger Mono) is a joist hanger for supporting mono trusses from timber members.

Product Information:

- Features speed Prongs for ease of installation.

- Pre-galvanised mild steel.

9mm OSB3 External Grade Composite Board - 2400mm x 1200mm

Oriented Strand Board (OSB) is an engineered wood based panel board where strands of wood are laid in cross-oriented layers and glued with an ECO resin. This results in a strong board that resists moisture, is versatile, and suitable for structural use in humid conditions.

Product Information:

- OSB3: Suitable for fibreglass roofing.

- Also known as Sterling Board

- Size: 2400mm x 1200mm.

- Thickness: 9mm

25mm Insulating Polystyrene Sheet 2400mm x 1200mm

Product Information:

- Easy to cut to size using a sharp knife.

- Very cost effective and entirely rotproof when correctly installed.

- Effectively insulates wall areas which minimises heat loss and reduces energy bills.

- Lightweight and easily handled for easy installation.

- Can be used underneath concrete sla bs in solid ground floor constructions, and also above or below damp proof membranes.

- Manufactured from expanded polystyrene board.

- Sheet size: 2400mm x 1200mm.

25mm x 50mm BS5534 Engineered Roofing Batten Treated - 4.8 Metres

(Special Offer: £0.58 + VAT per metre)

Roofing batten engineered produced in Sweden BS 5534 Certified.

Product Information:

- Country of origin: Sweden

- Species: Spruce

- Grade: BS 5534 certified

- Moisture content: Kiln dried (18% approx.)

- Treatment: UC2

- Colour: Gold

- Surface finish: Sawn

- Machined from / size: 25mm x 50mm