- Home Page
- Special Offers
- Building Products
- Timber & Joinery
- Sheet Materials
- Screws, Nails & Hardware
- Landscaping & Gardening
- Decking
- Fencing
- Turf, Topsoil & Bark
- Drainage Products
- Roofing & UPVC Products
- Guttering & Downpipe
- Velux Windows
- Paints, Preservers & Brushes
- Ironmongery
- Electrical
- Tools, Builders Equipment & Workwear
- Composite Products
- Stove Depot
- Special Offers
- Our Delivery Area
- Search
- Blog
- Contact Us
Fibreglass Roofing
A fibreglass roofing system, also referred to as a glass fibre or GRP roofing system, is a composite material made from resin and glass fibre strands, offering strength, lightweight properties, waterproofing, and durability.
GRP Fibreglass Roofing Matting 450g (Full Roll Approx 73m2)
Fibreglass Matting Roll 450g
Product Information:
- Weight: 450g per square metre.
- Full roll size: 73m2.
100mm GRP Fibreglass Roofing Bandage Roll 50mtr
Fibreglass Bandage - 75 metre Roll
75mm wide fibreglass bandage supplied in a 75mtr roll
Product Information:
- Roll width: 75mm
- Full Roll Length: 75mts
GRP Fibreglass Roofing Universal Flat Flashing 300mm - 20mtr
Fibreglass Flat Flashing - 300mm
Flat flashing 300mm wide x 20mts long.
Product Information:
- Width: 300mm.
- Length: 20mts.
Flashing Trim D260 For GRP Fibreglass Roofing - 3 Mtr
Flashing Trim D260 - For Fibreglass Roofing
3.0mts flashing trim for fibreglass roofing systems.
Product Information:
- Application: Flashing Trim.
- Length: 3mts.
Gutter Drip Trim A200 For GRP Fibreglass Roofing - 3 Mtr
Gutter Trim A200 - For Fibreglass Roofing
3.0mts gutter trim for fibreglass roofing systems.
Product Information:
- Application: Gutter Trim.
- Length: 3mts.
Joint Trim E280 For GRP Fibreglass Roofing - 3 Mtr
Jointing Trim E280 - For Fibreglass Roofing
3.0mts joint trim for fibreglass roofing systems.
Product Information:
- Application: Corner Trim
- Length: 3mts
Trim Corner Piece C1 For GRP Fibreglass Roofing
Corner Trim C1 - For Fibreglass Roofing
Corner piece trim for fibreglass roofing systems.
Product Information:
- Application: Corner Trim
Upstand Raised Edge Trim B260 For GRP Fibreglass Roofing - 3 Mtr
Upstand Trim B260 - For Fibreglass Roofing
3.0mts upstand trim for fibreglass roofing systems.
Product Information:
- Application: Upstand Trim.
- Length: 3mts.
Slate Granules For GRP Fibreglass Roofing - 25kg
Slate Granules 25kg - For Fibreglass Roofing
The Slate granules are used to provide a decorative finish by sprinkling onto the wet top-coat surface, and then dusting the excess off once the topcoat has cure; the granules can be rolled into the topcoat so that the granules are encapsulated giving a non-slip surface area or walkway on the roof.
Product Information:
- For achieving a non slip surface on GRP flat roofing.
- Coverage: 1m2 per kg.
- Weight: 25kg.
AQUA GRP Roofing Resin - 17 Ltr (20kg)
AQUA GRP Resin - 20kg (17 Litres)
Polyester resin for use in flat roofing applications.
Product Information:
- Aqua GRP Resin when used with Aqua Topcoat provides a leak free cost effective flat roofing system.
- The systm is cold applied and does not require any use of flame torches making installation safer.
- When competently installed the Aqua GRP range creates a seamless, frost proof and strong flat roof of any shape and size.
- Aqua Resin and Topcoat should be mixed with a quality hardener and is compatible with all good quality components such as GRP trims, trim adhesives and chopped strand matting.
- Economical alternative to Sentinel
Documents:
AQUA GRP Roofing Resin - 8.5 Ltr (10kg)
AQUA GRP Resin - 10kg (8.5 Litres)
Polyester resin for use in flat roofing applications.
Product Information:
- Aqua GRP Resin when used with Aqua Topcoat provides a leak free cost effective flat roofing system.
- The systm is cold applied and does not require any use of flame torches making installation safer.
- When competently installed the Aqua GRP range creates a seamless, frost proof and strong flat roof of any shape and size.
- Aqua Resin and Topcoat should be mixed with a quality hardener and is compatible with all good quality components such as GRP trims, trim adhesives and chopped strand matting.
- Economical alternative to Sentinel
Documents:
AQUA GRP Roofing Top Coat - Steel Grey - 17 Ltr (20kg)
AQUA GRP Topcoat - 20kg (17 Litres)
Steel grey, specifically formulated Top coat.
Product Information:
- Aqua GRP Resin when used with Aqua Topcoat provides a leak free cost effective flat roofing system.
- The systm is cold applied and does not require any use of flame torches making installation safer.
- When competently installed the Aqua GRP range creates a seamless, frost proof and strong flat roof of any shape and size.
- Aqua Resin and Topcoat should be mixed with a quality hardener and is compatible with all good quality components such as GRP trims, trim adhesives and chopped strand matting.
- Economical alternative to Sentinel
Documents:
AQUA GRP Roofing Top Coat - Steel Grey - 8.5 Ltr (10kg)
AQUA GRP Topcoat - 10kg (8.5 Litres)
Steel grey, specifically formulated Top coat.
Product Information:
- Aqua GRP Resin when used with Aqua Topcoat provides a leak free cost effective flat roofing system.
- The systm is cold applied and does not require any use of flame torches making installation safer.
- When competently installed the Aqua GRP range creates a seamless, frost proof and strong flat roof of any shape and size.
- Aqua Resin and Topcoat should be mixed with a quality hardener and is compatible with all good quality components such as GRP trims, trim adhesives and chopped strand matting.
- Economical alternative to Sentinel
Documents:
Catalyst Activator - For GRP Fibreglass Roofing - 5kg
Roofing Hardener Catalyst 5kg - For Fibreglass Roofing
For top coat used in fibreglass roofing systems.
Product Information:
- Application: Catalyst for top coat.
- Sizes: 5kg.
Sentinel GRP Hardener Catalyst 1kg - Inc. Dispensing Bottle
GRP Catalyst 1 kg with Dispensing Bottle
Sentinel Hardener enables both Resin & Topcoat to cure. You need to add at a rate of between 1 & 4% by weight depending on the weather conditions.
Product Information:
- Sentinel hardener is used for applications such as a hand lay-up, spray up, centrifugal casting, filament winding, polyester concrete, etc
- It is particularly suitable for gel coat curing
- Its low viscosity makes it ideal for spray-up techniques (airless) with external mixing.
- Size: 1kg
Documents:
Sentinel GRP Pure Acetone - 5 Ltr
Sentinel Acetone - 5 Litres
Sentinel Acetone is used for cleaning tools, rollers and surfaces prior to applying Resin or Topcoat
Product Information:
- 5 Litres
Documents:
Graduated Mixing Bucket For GRP Fibreglass Roofing - 10 Ltr
Graduated GRP Mixing Bucket - 10L
Graduated Mixing Bucket with internal and external litre markings to assist in measuring.
Product Information:
- Application: For mixing fibreglass chemicals
- Volume: 10 Litres
GRP Fibreglass Roofing Metal Paddle Roller - 75mm
Metal Roller 75mm - For Fibreglass Roofing
The perfect tool for a quick wet out and air remove on large surfaces, this popular tool is also the least expensive and one of the best value rollers.
Product Information:
- Light aluminium construction.
- Easy use.
- Non stick properties.
- Quick wet out and good air removal of the laminate.
- Longer life and easier cleaning.
- Width: 75mm.
GRP Fibreglass Roofing Metal Paddle Roller - 150mm
Metal Roller 150mm - For Fibreglass Roofing
The perfect tool for a quick wet out and air remove on large surfaces, this popular tool is also the least expensive and one of the best value rollers.
Product Information:
- Light aluminium construction.
- Easy use.
- Non stick properties.
- Quick wet out and good air removal of the laminate.
- Longer life and easier cleaning.
- Width: 150mm.
GRP Fibreglass Roofing Metal Paddle Roller - 225mm
Metal Roller 225mm - For Fibreglass Roofing
The perfect tool for a quick wet out and air remove on large surfaces, this popular tool is also the least expensive and one of the best value rollers.
Product Information:
- Light aluminium construction.
- Easy use.
- Non stick properties.
- Quick wet out and good air removal of the laminate.
- Longer life and easier cleaning.
- Width: 225mm.
GRP Fibreglass Roofing Application Roller - 75mm
Phenolic Roller and Frame 75mm - For Fibreglass Roofing
The perfect tool for applying base coat to a fibreglass roof.
Product Information:
- Plastic handle with metal roller frame.
- Roller: Phenolic core shed resistant epoxy roller cover.
- Easy use.
- Width: 75mm.
GRP Fibreglass Roofing Application Roller - 225mm
Phenolic Roller and Frame 225mm - For Fibreglass Roofing
The perfect tool for applying base coat to a fibreglass roof.
Product Information:
- Plastic handle with metal roller frame.
- Roller: Phenolic core shed resistant epoxy roller cover.
- Easy use.
- Width: 225mm.
GRP Fibreglass Roofing Application Roller - 150mm
Phenolic Roller and Frame 150mm - For Fibreglass Roofing
The perfect tool for applying base coat to a fibreglass roof.
Product Information:
- Plastic handle with metal roller frame.
- Roller: Phenolic core shed resistant epoxy roller cover.
- Easy use.
- Width: 150mm.
Rolled Ridge Closure C5 (For Use With E280) - For GRP Fibreglass Roofing
Rolled Ridge Closure Trim C5 - For Fibreglass Roofing
Rolled ridge closure trim for fibreglass roofing systems for use with E280
Product Information:
- Application: For use with E280 Roofing trim
