Everbuild Stixall Extreme Power Sealant & Adhesive 290ml - Crystal Clear

Insulation Sheets PIR Urethane 2400mm x 1200mm x 25mm

PIR is made by blending together two primary chemicals and other materials to form a rigid foam product.

The heat generated during the reaction enable gases to evaporate and become trapped within cells delivering premium thermal performance characteristics.

Product Information:

- For insulation.

- Easy to handle and install.

- Lowers energy use.

- Resists water vapour.

- Size: 2400mm x 1200mm.

- Thickness: 25mm.

Thermal Plasterboard Taper Edge 22mm x 1200mm x 2400mm -  (9.5mm Plasterboard & 12.5mm Polystyrene)

These boards are used to provide a basic level of improvement to thermal insulation, and for rooms where only a low level of insulation is required such as bedrooms.

Product Information:

- For ceilings and partitions

- Polystyrene backed 9.5mm taper edged plasterboard

- Reduces CO2 emissions

- The thermal conductivity is 0.038W/mK

- Vapour resistant boards

- CFC & HFC free

- 22mm thick x 1200mm wide x 2400mm long

- Taper edged

Plasterboard Foil Backed Vapour Shield Taper Edge 12.5mm x 1200mm x 2400mm

2400mm x 1200mm x 12.5mm Vapour Shield (foil backed) plasterboard taper edged.

The vapour panel is a laminated plasterboard with a metallised foil grey paper face, which has been specifically manufactured to resist vapour, applications include internal face of an external wall, roof and loft conversations. 

Product Information:

- For use when a vapour barrier is required to prevent moisture ingress

- Laminated with metallised polyester to block out water vapour

- Use where a vapour barrier is required, for example in pitched roofs and loft conversions

- Complies fully with BS1230 Part 1 1985

- Easy to score and cut with a sharp knife

- 12.5mm thick x 1200mm wide x 2400mm long

- Taper edged