Everbuild Black Jack Self Adhesive Flashing Tape - 150mm x 10mtr

O'Brien Sand & Cement Mortar Mix 20kg Bag

O’Brien Sand and cement is a dried sand and cement product that is pre-mixed and blended. The pre-mixed ratio is approximately 3 parts sand to 1 part cement using the traditional volume method or 4 parts sand to 1 part cement using the weight method. The individual constituents of this mix meet Irish and European standards for building products. The cement used is O’Brien cement manufactured in Ireland certified to IS EN 197-1 2011.

Product Information:

- Bricklaying

- Block laying

- Pointing

- Repair or maintenance

- Interior or exterior application

Benefits:

- General purpose mortar

- Recyclable showerproof plastic bag

- Simple to mix and use

Gutter / Guttering Half Round Profile Support Bracket

Half Round Gutter Support Clip / Brackets are fixed to a wall to allow the installation of a gutter.

Product Information:

- Manufacturer: Freefoam.

- Profile: Half round.

- Fitting: Gutter support bracket / clip.

- Size: 112mm.

63mm Steel Handrail Bracket - White

Ideal for securing timber handrails to the wall.

Product Information:

- Use with timber handrails

- 63mm length

- Fixings included

O'Brien Post Mix 20kg Bag

O’Brien Cement Post Mix is a simple to use rapid setting concrete mix for fixing posts in the ground. It is pre-mixed and blended and contains cement, dried aggregates and admixtures. The cement used is O’Brien Cement manufactured in Ireland and conforms to I.S EN 197-1 2011.

Product Information:

1. 1. Dig a hole to required size for post, half fill the hole with water and place the post in the hole,
2. 2. Tip the pre-mixed aggregate uniformly into the hole around the post, until it is above the level of water,
3. 3. If any dry powder remains visible at this stage, add additional water until absorbed by the material,
4. 4. Adjust the post into position and support appropriately until material set occurs, which takes approximately 10 minutes.

19mm x 38mm Roofing Batten Treated - 4.8 metres

Roofing batten type A produced in Sweden BS 8417 Certified.

Product Information:

- Country of origin: Sweden

- Species: Spruce

- Grade: BS 8417 certified

- Moisture content: Kiln dried (18% approx.)

- Treatment: UC2

- Colour: Green

- Surface finish: Sawn

- Machined from / size: 19mm x 38mm

- Length: 4.8mts

Standard Plasterboard Taper Edge - 12.5mm x 1200mm x 2400mm

Product Information:

- For ceilings and forming partitions

- Can be decorated directly or coated with thistle plaster finish

- Easy to score and snap with a clean cut edge for quick use

- Ivory paper faced for ease of identification

- Can be fixed in single or multiple layers which increases acoustic and fire performance

- Easily fixed on to a wide range of materials with drywall fixings or adhesive

- 12.5mm thick x 1200mm wide x 2400mm long

- Taper edged

Timco Brown Plastic Wall Plugs - 36mm (Box of 100)

Suitable for all kinds of concrete and masonry substrate materials. Ideal for medium and lightweight applications.

NOTE: It may be beneficial to reduce drill diameter in soft materials.

Product Information:

- Carton Quantity: 100

- Length: 36mm

Downpipe Round Pipe Bracket

Product Information:

- Manufacturer: Freefoam.

- Profile: Round.

- Fitting: Round pipe clip.

- Size: 68mm.

Gutter / Guttering Half Round Profile 90° Degree Bend

90 Degree Half Round Gutter Bend for connecting 2 lengths of gutter around a corner.

Product Information:

- Manufacturer: Freefoam.

- Profile: Half round.

- Fitting: Gutter 90 degree bend.

- Size: 112mm.

Gutter / Guttering Half Round Profile External Stop End

Product Information:

- Manufacturer: Freefoam.

- Profile: Half round.

- Fitting: Gutter external stop end.

- Size: 112mm.