Everbuild Black Jack 901 Black Bitumen Paint - 1 Ltr

Decking Spindle Turned Profile Treated

Treated Green decking spindles turned profile 900mm long x 41mm x 41mm

Product Information:

- Machined from: Scandinavian redwood timber.

- Profile: Turned.

- Treatment: Pressure treated UC3.

- Colour: Green (this is not a finish it contains no UV protection).

- Finished size: 41mm x 41mm.

- Length: 900mm.

Decking Newel Post With Round Ball Top Planed Treated

Treated decking newel post with ball top included 1.46mts long x 92mm x 92mm

Product Information:

- Classic design with ball top included.

- Machined from Scandinavian redwood timber (pressure treated).

- Colour: Green UC3 treated (this is not a finish it contains no UV protection).

- Dimensions: 92mm x 92mm.

- Length: 1.46mts.

UC3 Treated Sawn Timber - 100mm x 100mm - 1.8 Metres

Treated 4" x 4" Sawn green fence post.

Product Information:

- Country of origin: UK

- Species: Spruce

- Surface finish: Rough sawn

- Treatment: UC3

- Colour: Green

- Machined from / size: 100mm x 100mm

- Length: 1.8mts

O'Brien Post Mix 20kg Bag

O’Brien Cement Post Mix is a simple to use rapid setting concrete mix for fixing posts in the ground. It is pre-mixed and blended and contains cement, dried aggregates and admixtures. The cement used is O’Brien Cement manufactured in Ireland and conforms to I.S EN 197-1 2011.

Product Information:

1. 1. Dig a hole to required size for post, half fill the hole with water and place the post in the hole,
2. 2. Tip the pre-mixed aggregate uniformly into the hole around the post, until it is above the level of water,
3. 3. If any dry powder remains visible at this stage, add additional water until absorbed by the material,
4. 4. Adjust the post into position and support appropriately until material set occurs, which takes approximately 10 minutes.

Decking Handrail / Baserail Treated - 3.6mts

Dual profile to be used as handrail and baserail.

Product Information:

- Material: Redwood

- Treatment: UC3 please note this is not a finish

- Colour: Green (this is not a finish it contains no UV protection)

- Machined from: 38mm x 100mm

- Finished size: 32mm x 78mm

- Length: 3.6 metres

38mm x 88mm Fencing Rail Treated UC3 Green - 3.6mtr

This timber is mainly used for fencing rails but has other suitable applications.

Product Information: Premium Quality!

- Country of origin: UK

- Species: Spruce

- Grade: Ungraded

- Surface finish: Sawn

- Colour: Green

- Treatment: UC3

- Size: 38mm x 88mm

- Length: 3.6 metre

UC3 Treated Sawn Timber - 75mm x 75mm - 2.1 Metres

Treated 3" x 3" Sawn green fence post.

Product Information: Premium Quality!

- Country of origin: UK

- Species: Spruce

- Surface finish: Rough sawn

- Treatment: UC3

- Colour: Green

- Machined from / size: 75mm x 75mm

- Length: 2.1mts

38mm x 63mm Capping Rail Treated Green - 3.6mtr

For finishing the top edge of a fence.

Product Information:

- Material: UK softwood

- Finish: Sawn

- Treatment: UC3

- Colour: Green

- Width: 63mm

- Thickness: 38mm

- Length: 3.6mts

Timco FirmaHold Collated Clipped Head Nails - Plain Shank - FirmaGalv

3.1 x 90

For use in structural applications using high quality paper collation for reduced nail jams. Rust protection to comply with building regulations and meet with service classes.

Product Information:

- 34° collation angle

- Diamond point for maximum penetration

- Clipped head to increase the number of nails per strip and therefore reduce tool loading times

- Suitable for indoor applications

- Conforms to Eurocode 5 and Service Class 1

- Plain shank type

- Pack size: 2000 pieces

- Fuel Cell quantity: 2