You have no items in your shopping cart.
Everbuild B1 Hand Held Fire Foam - 750ml
B1 Handheld Fire Foam is a quick-setting one-part polyurethane foam with fire-retardant properties. The foam expands on application to up to 50 times its original volume and meets the test criteria BS476 Part 20; Class B1. Fire rated up to 4 hours in certain joint configurations. Once cured, the foam can be cut, sawn or plastered over after approximately one hour.
Product Information:
- High degree of fire rating: slows down the passage of flames and smoke
- Quick setting - can be cut, sawn or plastered in 1 hour
- Economical in use - expands up to 50 times its original aerosol volume
- Fills irregular and broad gaps where most conventional fillers would fail
- Possesses insulating and sound deadening properties
- Size: 750ml
The product images displayed are for illustrative purposes only and may not fully represent the actual product.
The recommendations regarding the application and intended use of the products are based on our current knowledge and experience, assuming proper storage, handling, and application under standard conditions. All product specifications, information, and data provided on the website are subject to change. While the information provided is believed to be accurate and reliable, it is offered without any guarantee, warranty, or responsibility of any kind.
Cement White 25kg Bag
White Cement is a high quality cement, and is used where special colour requirements is specified for concrete or mortar.
Southern white cement supplied in a 25 kg bag is guaranteed to meet in full the requirements of EN 197-1 “cement part 1: composition, specifications and conformity criteria for common cements” and carries the CE mark.
O'Brien Sand & Cement Mortar Mix 20kg Bag
O’Brien Sand and cement is a dried sand and cement product that is pre-mixed and blended. The pre-mixed ratio is approximately 3 parts sand to 1 part cement using the traditional volume method or 4 parts sand to 1 part cement using the weight method. The individual constituents of this mix meet Irish and European standards for building products. The cement used is O’Brien cement manufactured in Ireland certified to IS EN 197-1 2011.
- Bricklaying
- Block laying
- Pointing
- Repair or maintenance
- Interior or exterior application
Benefits:
- General purpose mortar
- Recyclable showerproof plastic bag
- Simple to mix and use
Feb Febond SBR - Waterproofer and Bonding Admixture - 5 Litres
Is a styrene-butadiene co-polymer latex especially designed for use with cementitious mixes. It is used in mortar and concrete as an admixture it increases water and abrasion resistance and durability. It is used with cement as a reliable water resisting bonding agent.
- Greatly increased flexing and tensile strength, toughness and durability, with improved abrasion resistance.
- Reduces shrinkage with an appropriate aggregate.
- Prevents bleeding.
- Lowers the water to cement ratio.
- Good frost and abrasion resistance to water borne salt penetration.
Febond Blue Grit Bonding Agent Primer - 10 Litres
Blue Grit is a high-performance plasterers grip coat bonding agent designed to provide an improved key to smooth surfaces. It contains a fine aggregate which provides a mechanical key to backgrounds such as plaster, concrete, painted surfaces, textured surfaces and ceramic tiles.
- Bond strength tested in accordance with EN13892-8.
- Ready to use immediately from the tub.
- Simple application by roller or brush.
- Coloured Blue to indicate coverage.
- One coat application.