Cement Products

Sika MaxMix Concentrated Integral Waterproofer - 1 Ltr

Sika MaxMix Waterproofer is a liquid admixture for pointing, renders and screeds. It can be used in all situations where resistance to water is required such as screeds, renders, pointing and mortars. 1 litre treats up to 250kg of cement.

Product Information:

- Concentrated formula 1ltr = 25ltrs of standard waterproofer

- Controlled dosage system, resulting in no waste or spillages

- Easy to use gauged bottle

- Improves water resistance

- Increases workability

- Improved freeze thaw resistance

- Reduces efflorescence

Sika MaxMix Concentrated Mortar Plasticiser - 1 Ltr

Sika MaxMix Plasticiser is a liquid air entraining agent for brick laying mortars, renders, pointing and screeds. It can be used in all situations where improved work-ability is required. 1 Litre treats up to 5 tons of cement.

Product Information:

- Concentrated formula. 1 L is equivalent to 25 L of standard mortar plasticiser

- Easy to use gauged bottle

- Superior plasticising action

- Improves workability of mortars

- Increased frost resistance

- Minimises cracking

Sika MaxMix Frostproofer and Accelerator - 1 Ltr

Sika MaxMix Frostproofer is a highly concentrated, chloride free, air entraining admix which is designed specifically for cold weather working, eliminating the requirement for a second frostproofing admix. Sika MaxMix Frostproofer reduces the setting time of sand and cement based mortars, renders, screeds etc and is the ideal choice for a cold weather admix providing frost protection below –4 °C. Being chloride free, Sika MaxMix Frostproofer will not attack embedded steel and hence is suitable for use with brick ties etc.

Product Information:

- Fast acting powerful formula - 1 Litre treats up to 100 kg of cement

- Reduces water absorption and penetration

- Improves workability and accelerates set

- Protects in subzero temperatures

- Easy to use, controlled dosage system, so no waste or spillages

O'Brien Post Mix 20kg Bag

O’Brien Cement Post Mix is a simple to use rapid setting concrete mix for fixing posts in the ground. It is pre-mixed and blended and contains cement, dried aggregates and admixtures. The cement used is O’Brien Cement manufactured in Ireland and conforms to I.S EN 197-1 2011.

Product Information:

1. 1. Dig a hole to required size for post, half fill the hole with water and place the post in the hole,
2. 2. Tip the pre-mixed aggregate uniformly into the hole around the post, until it is above the level of water,
3. 3. If any dry powder remains visible at this stage, add additional water until absorbed by the material,
4. 4. Adjust the post into position and support appropriately until material set occurs, which takes approximately 10 minutes.

O'Brien Sand & Cement Mortar Mix 20kg Bag

O’Brien Sand and cement is a dried sand and cement product that is pre-mixed and blended. The pre-mixed ratio is approximately 3 parts sand to 1 part cement using the traditional volume method or 4 parts sand to 1 part cement using the weight method. The individual constituents of this mix meet Irish and European standards for building products. The cement used is O’Brien cement manufactured in Ireland certified to IS EN 197-1 2011.

Product Information:

- Bricklaying

- Block laying

- Pointing

- Repair or maintenance

- Interior or exterior application

Benefits:

- General purpose mortar

- Recyclable showerproof plastic bag

- Simple to mix and use

Hydrated Lime - 25kg Bag

Premier hydrated lime is a high quality ultra fine ultra white calcitic hydrated building lime, which can be used on its own or mixed with hydraulic bi nders, for use in mortars for plastering and blockwork, the quality of hydrated lime is guaranteed to meet the requirements of air lime class CL 90 S in EN 459-1.

Product Information:

- Ultra-fine, ultra-white calcitic hydrated lime

- Suitable for plastering and blockwork mortars

- Can be used on its own or with hydraulic binders

- Complies with air lime class CL 90 S (EN 459-1)

- Pack size: 25kg

Cement White 25kg Bag

White Cement is a high quality cement, and is used where special colour requirements is specified for concrete or mortar.

Product Information:

Southern white cement supplied in a 25 kg bag is guaranteed to meet in full the requirements of EN 197-1 “cement part 1: composition, specifications and conformity criteria for common cements” and carries the CE mark.

Everbuild 203 Accelerator and Frostproofer

Is a liquid additive formulated to accelerate setting and hardening times of mortar, concretes, screeds and rendering and providing frost protection during the setting period,
Effective even in sub zero temperatures it can also be used in normal temperatures where a rapid set is required and as a plugging admixture.

Product Information:

Uses:

- Mortars.

- Floor screeds.

- External / internal cement based rendering.

- Concrete (non structural).

- Can be used as an emergency repair plugging aid when mixed neat with cement.

Characteristics / Advantages:

- Faster finishing times even in cold weather.

- Provides frost protection down to -8°C in wet mortar.

- 0.1% chloride ion, non corrosive formula

- Optimises mould usage.

Everbuild 204 Evermix 3 in 1 - 25 Litres

Evermix 3 in 1 triple action admixture waterproofs, plasticises and retards to assist workability, reduce water penetration and allow larger areas to be covered in one application.

Product Information:

Evermix 3 in 1 is particularly formulated for use in renders, dry dash and pebble-dashing, however it can also be used in any cement mixture where waterproofing and increased workability are required in conjunction with retarded setting. 

Tested to BS4887 1973.

Everbuild 204 Evermix 3 in 1

Evermix 3 in 1 triple action admixture waterproofs, plasticises and retards to assist workability, reduce water penetration and allow larger areas to be covered in one application.

Product Information:

Evermix 3 in 1 is particularly formulated for use in renders, dry dash and pebble-dashing, however it can also be used in any cement mixture where waterproofing and increased workability are required in conjunction with retarded setting. 

Tested to BS4887 1973.

403 Concrete Hardener and Dustproofer.

403 Concrete Hardener & Dustproofer is formulated from high quality silicate resins to harden and dustproof new and old concrete floors for both interior and exterior use, it reacts chemically with the lime content of concrete to form a hard wearing surface.

Product Information:

- Fast acting.

- Dries clear.

- Leaves a residual surface to prevent further dusting.

- Easy clean up with water.

- Helps in the prevention of bloom efflorescence.

Everbuild 501 Universal PVA Bond - 1 ltr

PVA Bond is a multi-purpose bonding agent, primer, sealer, cement and plaster admixture that adheres to most common building and DIY materials.

Ideal for priming unsound surfaces prior to plastering or painting, as an adhesive on wood, cork, textiles and most applications where at least one surface is porous, for general dust sealing on flaking paintwork/walls etc and as a cement and plaster admixture.

Product Information:

- Fully conforms to BS 5270

- Improves flexibility of sand cement products

- Reduced water : cement ratio for equivalent workability

- Reduces surface porosity of mortar and plaster

- Improved frost resistance

- Size - 1 Litre

Everbuild 501 Universal PVA Bond - 5ltr

PVA Bond is a multi-purpose bonding agent, primer, sealer, cement and plaster admixture that adheres to most common building and DIY materials.

Ideal for priming unsound surfaces prior to plastering or painting, as an adhesive on wood, cork, textiles and most applications where at least one surface is porous, for general dust sealing on flaking paintwork/walls etc and as a cement and plaster admixture.

Product Information:

- Fully conforms to BS 5270

- Improves flexibility of sand cement products

- Reduced water : cement ratio for equivalent workability

- Reduces surface porosity of mortar and plaster

- Improved frost resistance

Everbuild Jetcem Rapid - 6kg

Everbuild Jetcem Rapid is a specially formulated rapid setting cement based patching/repair compound which when mixed with water sets in about 30 minutes.

Product Information:

- Rapid setting (30 minutes, depending on ambient temperature and conditions).

- Easy mixing, just add water.

- Fills up to 25 mm in one application

Everbuild Jetcem Waterproof - 3kg

Everbuild Jetcem Waterproof is a cement based mix, formulated specifically for water resistance and is designed to set hard in about 30 minutes.

Product Information:

- Rapid setting (30 minutes, depending on ambient temperature and conditions).

- Easy mixing, just add water.

- Waterproof once cured.

- Fast, strong and easy to use.

- Use on concrete, stone and brick.

Febmix Admix - The Original SW - 5 Litres

Febmix Admix SW – The Original is an air entraining plasticiser that replaces lime in the mix. This version is a specially-designed South West formula available for use in South Wales and the West Country

Provides an easy to work “butter like” consistency to the mortar and to prevent shrinkage, cracking and crazing during the setting process.

Product Information:

- Suitable for use in brick laying and plastering mortars

- Reduces bleed and segregation of mortar

- Helps to reduce efflorescence

- Improved weather resistance and durability

- Provides a degree of frost resistance and long term resistance to freeze-thaw cycles when set

- Conforms to the requirements of EN934-3 (2009) +A1 (2012)

- Specially-designed South West formula available for use in South Wales and the West Country

- Reduces shrinkage

Mapei Ultraplan Renovation Screed 25kg

- Fibre reinforced self-levelling compound designed for the renovation/refurbishment of existing floor substrates.

- Can be used from 3-40mm on concrete, screed, stone, ceramic, timber (ply wood, chipb oard, T&G floorboards).

- Suitable for use with underfloor heating systems and for encapsulating electric cable under tile heating systems.

Product Information:

- For domestic & commercial use.

- Can be applied by hand or pump.

- Coverage: 6m2 at 3mm thick approx.

Documents:

- TechnicalDataSheet.pdf

Sika MaxMix Powder Mortar Tone - 1kg - Brown

Sika MaxMix Powder Mortar Tone is a range of powdered oxide pigments which can be accurately measured to colour concrete, render, screeds, mortar etc. The pigments disperse easily into the mix to give a uniform shade for each mix batch, dose can be adjusted to provide a wider variety of colour depths.

Product Information:

- Improves workability/trowelability - contains a plasticiser

- Chloride free

- Reduces bleeding/segregation

- Inhibits efflorescence

- Adjustable colour depth

- Disperses easily for consistent colour

- Easy to control dosage

Sika MaxMix Powder Mortar Tone - 1kg - Buff

Sika MaxMix Powder Mortar Tone is a range of powdered oxide pigments which can be accurately measured to colour concrete, render, screeds, mortar etc. The pigments disperse easily into the mix to give a uniform shade for each mix batch, dose can be adjusted to provide a wider variety of colour depths.

Product Information:

- Improves workability/trowelability - contains a plasticiser

- Chloride free

- Reduces bleeding/segregation

- Inhibits efflorescence

- Adjustable colour depth

- Disperses easily for consistent colour

- Easy to control dosage

SikaBond SBR - 5 Litres

SikaBond SBR is a styrene-butadiene co-polymer, which has numerous uses as an admixture, primer, bonding agent and sealer for use in areas subject to humidity, dampness and water contact. Improves water resistance of cement mixtures by forming a reinforcing polymer that increases long term durability and flexibility of the mix on renderings and floor screeds. An admixture for cement and concrete applications, including repair and renovation, surfacing of floors and bonding generally. It contains anti-foam to control the density of cementitious mixes.

Product Information:

- Excellent adhesion to steel and concrete

- Adheres well to brick, tiles, glass, asphalt, wood, expanded polystyrene and most building materials

- Mixes may be applied in much thinner sections