Cement Additives & Dyes

Everbuild 203 Accelerator and Frostproofer

Is a liquid additive formulated to accelerate setting and hardening times of mortar, concretes, screeds and rendering and providing frost protection during the setting period,
Effective even in sub zero temperatures it can also be used in normal temperatures where a rapid set is required and as a plugging admixture.

Product Information:

Uses:

- Mortars.

- Floor screeds.

- External / internal cement based rendering.

- Concrete (non structural).

- Can be used as an emergency repair plugging aid when mixed neat with cement.

Characteristics / Advantages:

- Faster finishing times even in cold weather.

- Provides frost protection down to -8°C in wet mortar.

- 0.1% chloride ion, non corrosive formula

- Optimises mould usage.

Everbuild 204 Evermix 3 in 1

Evermix 3 in 1 triple action admixture waterproofs, plasticises and retards to assist workability, reduce water penetration and allow larger areas to be covered in one application.

Product Information:

Evermix 3 in 1 is particularly formulated for use in renders, dry dash and pebble-dashing, however it can also be used in any cement mixture where waterproofing and increased workability are required in conjunction with retarded setting. 

Tested to BS4887 1973.

Everbuild Powder Mortar Tone - 1kg - All Colours

Mortar Tone (208 Powder) is formulated from high quality oxide pigments for the colouring of all types of mortars, renders, concrete and pointing, the pigments easily disperse into the mix allowing a uniform shade for each batch mixed; the dose can be adjusted to provide a wider variety of colour depths

Frequently Asked Questions:

Q/. Can I use Cement Colours with a lime mortar.

A/. Yes, but the lime may bloom to the surface or produce efflorescence which may lighten the colour.

Q/. Can I use Cement Colours to brush onto concrete?

A/. No these colours must be part of a proper sa nd / cement mix for them to work properly, if they are painted on to a surface they will simply wash off as they are inert inorganic pigments.

Febmix Admix - The Original SW - 5 Litres

Febmix Admix SW – The Original is an air entraining plasticiser that replaces lime in the mix. This version is a specially-designed South West formula available for use in South Wales and the West Country

Provides an easy to work “butter like” consistency to the mortar and to prevent shrinkage, cracking and crazing during the setting process.

Product Information:

- Suitable for use in brick laying and plastering mortars

- Reduces bleed and segregation of mortar

- Helps to reduce efflorescence

- Improved weather resistance and durability

- Provides a degree of frost resistance and long term resistance to freeze-thaw cycles when set

- Conforms to the requirements of EN934-3 (2009) +A1 (2012)

- Specially-designed South West formula available for use in South Wales and the West Country

- Reduces shrinkage

Sika MaxMix Concentrated Integral Waterproofer - 1 Ltr

Sika MaxMix Waterproofer is a liquid admixture for pointing, renders and screeds. It can be used in all situations where resistance to water is required such as screeds, renders, pointing and mortars. 1 litre treats up to 250kg of cement.

Product Information:

- Improves water resistance

- Increases workability

- Improved freeze thaw resistance

- Reduces efflorescence

Sika MaxMix Concentrated Mortar Plasticiser - 1 Ltr

Sika MaxMix Plasticiser is a liquid air entraining agent for brick laying mortars, renders, pointing and screeds. It can be used in all situations where improved work-ability is required. 1litre treats up to 5 tons of cement.

Product Information:

- Increases workability

- Reduces efflorescence

- Increases resistance to frost damage

Sika MaxMix Frostproofer and Accelerator - 1 Ltr

Sika MaxMix Frostproofer & Accelerator is a liquid admixture for mortars and concrete. It can be used in all situations where reduced setting time is required. For working at temperatures down to -2 degrees. 1 litre treats up to 100kg of cement.

Product Information:

- Faster setting time

- Air entraining to give a more trowelable mix