Brackets & Nail Plates

Simpson Strong-Tie ABR90 Heavy Duty Angle Bracket - 70mm x 90mm 

Reinforced angle brackets are suitable for structural applications in framing and wood-frame houses.

Material:

- Pre-galvanised mild steel.

Benefits:

• Load capacity in all directions
• Improved capacities for full and partial nailing

Suitable On:

- Supporting member: solid wood, glued-laminated wood, concrete, steel, etc.

- Supported member: solid wood, composite lumber, glued-laminated wood, triangular trusses, profiles, etc.

When to Use:

- Fastening of small trusses.

- Cladding plates, cladding uprights.

- Rafter anchors, cantilevers, headers, etc.

Simpson Strong-Tie Reinforced Angle Bracket - 75mm x 48mm x 65mm

Reinforced angle brackets are suitable for structural applications in framing and wood-frame houses.

Material:

- Galvanized steel S250GD + Z275 according to NF EN 10346.

For Use With:

- Fastening of small trusses.

- Cladding plates, cladding uprights.

- Rafter anchors, cantilevers, headers, etc.

Simpson Strong-Tie Light Duty Angle Bracket - 100mm x 100mm

Light angle brackets are used in a large number of DIY applications and are commonly used for reinforcing furniture assemblies.

Material:

- Steel S235JR according to NF EN 10025, electro-galvanized finish.

Simpson Strong-Tie Light Duty Angle Bracket - 40mm x 40mm

Light angle brackets are used in a large number of DIY applications and are commonly used for reinforcing furniture assemblies.

Material:

- Steel S235JR according to NF EN 10025, electro-galvanized finish.

Simpson Strong-Tie Light Duty Angle Bracket - 60mm x 60mm

Light angle brackets are used in a large number of DIY applications and are commonly used for reinforcing furniture assemblies.

Material:

- Steel S235JR according to NF EN 10025, electro-galvanized finish.

Simpson Strong-Tie Light Duty Angle Bracket - 80mm x 80mm

Light angle brackets are used in a large number of DIY applications and are commonly used for reinforcing furniture assemblies.

Material:

- Steel S235JR according to NF EN 10025, electro-galvanized finish.

Simpson Strong-Tie Large Reinforced Angle Bracket - 150mm x 150mm x 65mm

Reinforced angle brackets are suitable for structural applications in framing and wood-frame houses.

Material:

- Pre-galvanised mild steel.

Benefits:

- Reinforced.

- Multiple applications.

Suitable On:

- Supporting member: solid wood, glued-laminated wood, concrete, steel, etc.

- Supported member: solid wood, composite lumber, glued-laminated wood, triangular trusses, profiles, etc.

When to Use:

- Fastening of small trusses.

- Cladding plates, cladding uprights.

- Rafter anchors, cantilevers, headers, etc.

Simpson Strong-Tie Large Reinforced Angle Bracket - 150mm x 90mm x 65mm

Reinforced angle brackets are suitable for structural applications in framing and wood-frame houses.

Material:

- Pre-galvanised mild steel.

Simpson Strong-Tie Adjustable Angle Bracket - 100mm x 55mm x 30mm

EFIXR angle brackets are intended for all assemblies for the design and installation of interior and exterior joinery. EFIXR stiffener improves rigidity particularly for large models.

Material:

- Galvanized steel S250GD + Z275 according to NF EN 10346.

Simpson Strong-Tie Adjustable Angle Bracket - 50mm x 55mm x 30mm

EFIXR angle brackets are intended for all assemblies for the design and installation of interior and exterior joinery. EFIXR stiffener improves rigidity particularly for large models.

Material:

- Galvanized steel S250GD + Z275 according to NF EN 10346.

Simpson Strong-Tie Adjustable Angle Bracket - 70mm x 55mm x 30mm

EFIXR angle brackets are intended for all assemblies for the design and installation of interior and exterior joinery. EFIXR stiffener improves rigidity particularly for large models.

Material:

- Galvanized steel S250GD + Z275 according to NF EN 10346.

Simpson Strong-Tie Angle Bracket - 50mm x 38mm x 35mm

The ‘A’ angles versatility means it can be used in many applications requiring 90° fixing.

Material:

- Pre-galvanised mild steel.

Simpsons High Wind Ties

Designed to provide wind ties for trusses or joists, this versatile range of products may be used for general tie applications where one member crosses another.

Suitable for use in Timber to Timber, Light Gauge Steel to Light Gauge Steel or Timber to Light Guage Steel Connections

Material:

- Pre-galvanised mild steel

Simpsons MP24 Mending Plate - 50mm x 100mm

The MP is an easy to use connector for timber splices, no nails required.

For non-structural applications only; not for truss applications.

Material:

- Pre-galvanised mild steel.

When to Use:

- Jointing of 2 pieces.

- Reinforcement of damaged or split assemblies.

- Boxes, etc.

Simpson Strong-Tie Multi Angle Bracket - 100mm x 70mm x 30mm

END type angle brackets have been completely redesigned for greater versatility in their applications.

Material:

- Galvanized steel S250GD + Z275 according to NF EN 10346.

Simpson Strong-Tie Multi Angle Bracket - 55mm x 60mm x 30mm

END type angle brackets have been completely redesigned for greater versatility in their applications.

Material:

- Galvanized steel S250GD + Z275 according to NF EN 10346.

Simpsons Nail Plate - 100mm x 140mm

Nail plates are used to connect two or more timber members together.

Material:

- Pre-glavanised mild steel. Grade S250GD

Benefits:

- Versatility of applications

- Can be bent on site

Simpsons Nail Plate - 100mm x 200mm

Nail plates are used to connect two or more timber members together.

Material:

- Pre-glavanised mild steel. Grade S250GD

Benefits:

- Versatility of applications

- Can be bent on site

Simpsons Nail Plate - 40mm x 120mm

Nail plates are used to connect two or more timber members together.

Material:

- Pre-glavanised mild steel. Grade S250GD

Benefits:

- Versatility of applications

- Can be bent on site

Simpsons Nail Plate - 80mm x 140mm

Nail plates are used to connect two or more timber members together.

Material:

- Pre-glavanised mild steel. Grade S250GD

Benefits:

- Versatility of applications

- Can be bent on site