Bolts, Bars, Nuts & Washers

*Please scroll down to view lengths.*

M6 Coach Bolt - Multiple Lengths 

Product Information:

- Conforms to DIN 603 Grade 4.8

- Fully threaded up to 100mm

- Metric coarse thread

- Zinc plated for increased corrosion resistance

- Length: Listed below

*Please scroll down to view lengths.*

M8 Coach Bolt - Multiple Lengths 

Product Information:

- Conforms to DIN 603 Grade 4.8

- Fully threaded up to 100mm

- Metric coarse thread

- Zinc plated for increased corrosion resistance

- Length: Listed below

*Please scroll down to view lengths.*

M10 Coach Bolt - Multiple Lengths 

Product Information:

- Conforms to DIN 603 Grade 4.8

- Fully threaded up to 100mm

- Metric coarse thread

- Zinc plated for increased corrosion resistance

- Length: Listed below

*Please scroll down to view lengths.*

M12 Coach Bolt - Multiple Lengths 

Product Information:

- Conforms to DIN 603 Grade 4.8

- Fully threaded up to 100mm

- Metric coarse thread

- Zinc plated for increased corrosion resistance

- Length: Listed below

Thunderbolt Masonry Fixing - Priced Per Bolt

Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone. It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications. The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt. Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.

Product Information:

- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust

- Remove any loose debris from the hole

- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action

- Tighten the Thunderbolt™ to secure the fixture firmly in place

Thunderbolt Masonry Fixing - Priced Per Bolt

Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone. It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications. The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt. Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.

Product Information:

- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust

- Remove any loose debris from the hole

- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action

- Tighten the Thunderbolt™ to secure the fixture firmly in place

Thunderbolt Masonry Fixing - Priced Per Bolt

Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone. It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications. The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt. Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.

Product Information:

- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust

- Remove any loose debris from the hole

- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action

- Tighten the Thunderbolt™ to secure the fixture firmly in place

Thunderbolt Masonry Fixing - Priced Per Bolt

Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone. It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications. The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt. Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.

Product Information:

- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust

- Remove any loose debris from the hole

- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action

- Tighten the Thunderbolt™ to secure the fixture firmly in place

Thunderbolt Masonry Fixing - Priced Per Bolt

Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone. It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications. The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt. Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.

Product Information:

- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust

- Remove any loose debris from the hole

- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action

- Tighten the Thunderbolt™ to secure the fixture firmly in place

Nylon Insert Nut - 10mm

Nylon insert nuts are an economical means of combatting loosening from vibration. A nylon neck situated at the top of the nut, is slightly narrower than the thread; as the nut is tightened, the nylon grips the corresponding thread.

Product Information:

- Metric coarse thread DIN 985 Type T

- The bolt threads into the nylon material located at the top of the hex nut

- The nut then "self-locks" and prevents loosening from vibration

- High tensile steel Grade 8.8

- Zinc coated for corrosion resistance

Square Plate Washer - BZP - 10mm

Product Information:

- Used with all fasteners for larger load distribution, e.g. bolting through a wall

- Round hole

- Zinc coated for corrosion resistance

- External size: 40mm x 40mm

- Thickness: 3.0mm

Steel Hex Nut - BZP - 10mm

Full nuts are applied to a matching male thread (examples include bolts, set screws and machine screws) and tighten two or more component parts together.

Product Information:

- Hexagon fits corresponding sockets and spanners.

10mm Steel Washer - BZP - M10

Used under the head of a bolt or nut to distribute the forces applied when tightening

Product Information:

- External Diameter: 24mm

- Thickness: 2.0mm

- Finish: BZP

Thunderbolt Masonry Fixing - Priced Per Bolt

Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone. It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications. The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt. Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.

Product Information:

- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust

- Remove any loose debris from the hole

- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action

- Tighten the Thunderbolt™ to secure the fixture firmly in place

Thunderbolt Masonry Fixing - Priced Per Bolt

Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone. It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications. The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt. Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.

Product Information:

- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust

- Remove any loose debris from the hole

- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action

- Tighten the Thunderbolt™ to secure the fixture firmly in place

Thunderbolt Masonry Fixing - Priced Per Bolt

Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone. It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications. The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt. Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.

Product Information:

- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust

- Remove any loose debris from the hole

- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action

- Tighten the Thunderbolt™ to secure the fixture firmly in place

Thunderbolt Masonry Fixing - Priced Per Bolt

Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone. It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications. The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt. Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.

Product Information:

- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust

- Remove any loose debris from the hole

- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action

- Tighten the Thunderbolt™ to secure the fixture firmly in place

Nylon Insert Nut - 12mm

Nylon insert nuts are an economical means of combatting loosening from vibration. A nylon neck situated at the top of the nut, is slightly narrower than the thread; as the nut is tightened, the nylon grips the corresponding thread.

Product Information:

- Metric coarse thread DIN 985 Type T

- The bolt threads into the nylon material located at the top of the hex nut

- The nut then "self-locks" and prevents loosening from vibration

- High tensile steel Grade 8.8

- Zinc coated for corrosion resistance

Square Plate Washer - BZP - 12mm

Product Information:

- Used with all fasteners for larger load distribution, e.g. bolting through a wall

- Round hole

- Zinc coated for corrosion resistance

- External size: 50mm x 50mm

- Thickness: 3.0mm

Steel Hex Nut - BZP - 12mm

Full nuts are applied to a matching male thread (examples include bolts, set screws and machine screws) and tighten two or more component parts together.

Product Information:

- Hexagon fits corresponding sockets and spanners.