Batten, Firrings & Roofing Sheets

19mm x 38mm Roofing Batten Treated - 4.8 metres

Roofing batten type A produced in Sweden BS 8417 Certified.

Product Information:

- Country of origin: Sweden

- Species: Spruce

- Grade: BS 8417 certified

- Moisture content: Kiln dried (18% approx.)

- Treatment: UC2

- Colour: Green

- Surface finish: Sawn

- Machined from / size: 19mm x 38mm

- Length: 4.8mts

25mm x 38mm Roofing Batten Treated - 4.8 metres

Roofing batten type A produced in Sweden BS 8417 Certified.

Product Information:

- Country of origin: Sweden

- Species: Spruce

- Grade: BS 8417 certified

- Moisture content: Kiln dried (18% approx.)

- Treatment: UC2

- Colour: Green

- Surface finish: Sawn

- Machined from / size: 25mm x 38mm

- Length: 4.8mts

*Please scroll down to view lengths.*

25mm x 50mm Type A Roofing Batten Treated - Multiple Lengths

Roofing batten type A produced in Sweden BS 8417 Certified.

Product Information:

- Country of origin: Sweden

- Species: Spruce

- Grade: BS 8417 certified

- Moisture content: Kiln dried (18% approx.)

- Treatment: UC2

- Colour: Green

- Surface finish: Sawn

- Machined from / size: 25mm x 50mm

- Length: Listed below

25mm x 50mm BS5534 Engineered Roofing Batten Treated - 4.8 Metres

Roofing batten engineered produced in Sweden BS 5534 Certified.

Product Information:

- Country of origin: Sweden

- Species: Spruce

- Grade: BS 5534 certified

- Moisture content: Kiln dried (18% approx.)

- Treatment: UC2

- Colour: Gold

- Surface finish: Sawn

- Machined from / size: 25mm x 50mm

OSB3 T & G 18mm External Grade Boards

Oriented Strand Board (OSB) is an engineered wood based panel board where strands of wood are laid in cross-oriented layers and glued with an ECO resin.

This results in a strong board that resists moisture, is versatile, and suitable for structural use in humid conditions.

Product Information:

- Profile: Tongue & groove

- OSB3: Suitable for fibreglass roofing

- Size: 2400mm x 600mm

- Thickness: 18mm

*Please scroll down to view all thicknesses.*

OSB3 External Grade Composite Board - 8ft x 4ft

Oriented Strand Board (OSB) is an engineered wood based panel board where strands of wood are laid in cross-oriented layers and glued with an ECO resin. This results in a strong board that resists moisture, is versatile, and suitable for structural use in humid conditions.

Product Information:

- OSB3: Suitable for fibreglass roofing

- Also known as Sterling Board

- Size: Listed Below

- Thickness: Listed Below

*Please scroll down to view lengths.*

Ex 45mm to 0mm Softwood Firring Pieces (Per Pair) - Multiple Lengths 

Tilting firring pieces for attaining the desired degree of fall on a roof.

Product Information:

- Used for roof sloping

- Sold in pairs only

- Finished Size: 45mm x 45mm to 0mm

- Length: Listed below

*Please scroll down to view lengths.*

Ex 70mm to 0mm Softwood Firring Pieces (Per Pair) - Multiple Lengths 

Tilting firring pieces for attaining the desired degree of fall on a roof.

Product Information:

- Used for roof sloping

- Sold in pairs only

- Finished Size: 45mm x 70mm to 0mm

- Length: Listed below

*Please scroll down to view lengths.*

Ex 95mm to 0mm Softwood Firring Pieces (Per Pair) - Multiple Lengths 

Tilting firring pieces for attaining the desired degree of fall on a roof.

Product Information:

- Used for roof sloping

- Sold in pairs only

- Finished Size: 45mm x 95mm to 0mm

- Length: Listed below

*Please scroll down to view lengths.*

Ex 120mm to 0mm Softwood Firring Pieces (Per Pair) - Multiple Lengths 

Tilting firring pieces for attaining the desired degree of fall on a roof.

Product Information:

- Used for roof sloping

- Sold in pairs only

- Finished Size: 45mm x 120mm to 0mm

- Length: Listed below

*Please scroll down to view lengths.*

Ex 145mm to 0mm Softwood Firring Pieces (Per Pair) - Multiple Lengths 

Tilting firring pieces for attaining the desired degree of fall on a roof.

Product Information:

- Used for roof sloping

- Sold in pairs only

- Finished Size: 45mm x 145mm to 0mm

- Length: Listed below

*Please scroll down to view lengths.*

25mm x 25mm Sawn Angle fillet - Multiple Lengths

Angle fillets are commonly used to bridge the gap between two joists set at an angle or to promote water run-off by introducing a angle to flat roofs.

Product information:

- Material: Pine softwood

- Size: 25mm x 25mm

- Length: Listed below

*Please scroll down to view lengths.*

50mm x 50mm Sawn Angle fillet - Multiple Lengths

Angle fillets are commonly used to bridge the gap between two joists set at an angle or to promote water run-off by introducing a angle to flat roofs.

Product information:

- Material: Pine softwood

- Size: 50mm x 50mm

- Length: Listed below

*Please scroll down to view lengths.*

75mm x 75mm Sawn Angle fillet - Multiple Lengths

Angle fillets are commonly used to bridge the gap between two joists set at an angle or to promote water run-off by introducing a angle to flat roofs.

Product information:

- Material: Pine softwood

- Size: 75mm x 75mm

- Length: Listed below

*Please scroll down to view lengths.*

100mm x 100mm Sawn Angle fillet - Multiple Lengths

Angle fillets are commonly used to bridge the gap between two joists set at an angle or to promote water run-off by introducing a angle to flat roofs.

Product information:

- Material: Pine softwood

- Size: 100mm x 100mm

- Length: Listed below

19mm x 38mm Roofing Batten Treated - 4.5 metres

Roofing batten type A produced in Sweden BS 8417 Certified.

Product Information:

- Country of origin: Sweden

- Species: Spruce

- Grade: BS 8417 certified

- Moisture content: Kiln dried (18% approx.)

- Treatment: UC2

- Colour: Green

- Surface finish: Sawn

- Machined from / size: 19mm x 38mm

- Length: 4.5mts