Bagged Cement Products

Cement 25kg Supplied in a Weatherproof Plastic Bag

O'Brien premium grade cement for jobs which require higher strength cement, such as screeds, concrete, plastering and mortar, this premium grade product is ideal.

Product Information:

- Smooth, uniform finish, and impressive drying performance.

- Premium grade O'Brien cement with 42.5N strength which offers exceptional performance.

- Supplied in a plastic based bag.

O'Brien Post Mix 20kg Bag

O’Brien Cement Post Mix is a simple to use rapid setting concrete mix for fixing posts in the ground. It is pre-mixed and blended and contains cement, dried aggregates and admixtures. The cement used is O’Brien Cement manufactured in Ireland and conforms to I.S EN 197-1 2011.

Product Information:

1. 1. Dig a hole to required size for post, half fill the hole with water and place the post in the hole,
2. 2. Tip the pre-mixed aggregate uniformly into the hole around the post, until it is above the level of water,
3. 3. If any dry powder remains visible at this stage, add additional water until absorbed by the material,
4. 4. Adjust the post into position and support appropriately until material set occurs, which takes approximately 10 minutes.

O'Brien Sand & Cement Mortar Mix 20kg Bag

O’Brien Sand and cement is a dried sand and cement product that is pre-mixed and blended. The pre-mixed ratio is approximately 3 parts sand to 1 part cement using the traditional volume method or 4 parts sand to 1 part cement using the weight method. The individual constituents of this mix meet Irish and European standards for building products. The cement used is O’Brien cement manufactured in Ireland certified to IS EN 197-1 2011.

Product Information:

- Bricklaying

- Block laying

- Pointing

- Repair or maintenance

- Interior or exterior application

Benefits:

- General purpose mortar

- Recyclable showerproof plastic bag

- Simple to mix and use

Hydrated Lime 25kg Bag

Product information:

Premier hydrated lime is a high quality ultra fine ultra white calcitic hydrated building lime, which can be used on its own or mixed with hydraulic bi nders, for use in mortars for plastering and blockwork, the quality of hydrated lime is guaranteed to meet the requirements of air lime class CL 90 S in EN 459-1.

Cement White 25kg Bag

White Cement is a high quality cement, and is used where special colour requirements is specified for concrete or mortar.

Product Information:

Southern white cement supplied in a 25 kg bag is guaranteed to meet in full the requirements of EN 197-1 “cement part 1: composition, specifications and conformity criteria for common cements” and carries the CE mark.

Everbuild Jetcem Rapid - 6kg

Everbuild Jetcem Rapid is a specially formulated rapid setting cement based patching/repair compound which when mixed with water sets in about 30 minutes.

Product Information:

- Rapid setting (30 minutes, depending on ambient temperature and conditions).

- Easy mixing, just add water.

- Fills up to 25 mm in one application

Everbuild Jetcem Waterproof - 3kg

Everbuild Jetcem Waterproof is a cement based mix, formulated specifically for water resistance and is designed to set hard in about 30 minutes.

Product Information:

- Rapid setting (30 minutes, depending on ambient temperature and conditions).

- Easy mixing, just add water.

- Waterproof once cured.

- Fast, strong and easy to use.

- Use on concrete, stone and brick.

Mapei Ultraplan Renovation Screed 25kg

- Fibre reinforced self-levelling compound designed for the renovation/refurbishment of existing floor substrates.

- Can be used from 3-40mm on concrete, screed, stone, ceramic, timber (ply wood, chipb oard, T&G floorboards).

- Suitable for use with underfloor heating systems and for encapsulating electric cable under tile heating systems.

Product Information:

- For domestic & commercial use.

- Can be applied by hand or pump.

- Coverage: 6m2 at 3mm thick approx.

Documents:

- TechnicalDataSheet.pdf

Sikafloor-125 Level Flex - 20kg

Self levelling compound with added polymer powder. 

Sikafloor-125 Level Flex is a 1-part, ready to use latex modified smoothing and levelling compound for advanced flexibility and resilience. It is suitable for smoothing and levelling uneven, rigid internal floors prior to applying final wearing coverings.

Product Information:

- Flexible, self-smoothing and highly fluid.

- Low shrinkage.

- Easy to apply by pump or manual application.

- 2–4 hours walk on time (+20 °C).

- Can be overlaid in approx. 8 hours (+20 °C).

- Maintains good workability and joint healing.

- Good surface appearance and hardness.

- Protein and formaldehyde free.

Usage:

Levelling/smoothing

- Concrete.

- Sand/cement screeds (not anhydrite).

- Quarry tiles, terrazzo, ceramic tiles.

- Underfloor heating applications beneath heating cables/pipe

Wykamol Tanking Slurry - 20kg Bag in a Bucket BBA - Coverage approx 7sqm per tub

Wykamol Tanking Slurry is a cementitious waterproofing system which creates a monolithic bond using crystalline chemicals when applied to concrete and masonry structures. BBA and WRAS approved. Can also be used as a radon barrier with appropriate application.

When mixed with clean water and applied correctly, Wykamol Tanking Slurry forms a permanent waterproof coating to the concrete and masonry and is easily applied by brush, roller or spray.

Tanking Slurry waterproofs against positive and negative hydrostatic heads of water and is suitable for use, internally, externally, above and below ground. Tanking slurry is ideal for use as part of a damp-proofing course (DPC).

Typical Uses: 

Product Information:

CLEARANCE - DAMAGED BAG

O'Brien Post Mix - 20kg Damaged Bag

Damaged 20kg bags of Postcrete including: holes in bags, split seals and generally damaged packaging.

Product Original Description:

O’Brien Cement Post Mix is a simple to use rapid setting concrete mix for fixing posts in the ground. It is pre-mixed and blended and contains cement, dried aggregates and admixtures. The cement used is O’Brien Cement manufactured in Ireland and conforms to I.S EN 197-1 2011.

Product Information:

1. Dig a hole to required size for post, half fill the hole with water and place the post in the hole

2. Tip the pre-mixed aggregate uniformly into the hole around the post, until it is above the level of water

3. If any dry powder remains visible at this stage, add additional water until absorbed by the material

4. Adjust the post into position and support appropriately until material set occurs, which takes approximately 10 minutes