Admixtures & Chemicals

Everbuild 203 Accelerator and Frostproofer

Is a liquid additive formulated to accelerate setting and hardening times of mortar, concretes, screeds and rendering and providing frost protection during the setting period,
Effective even in sub zero temperatures it can also be used in normal temperatures where a rapid set is required and as a plugging admixture.

Product Information:

Uses:

- Mortars.

- Floor screeds.

- External / internal cement based rendering.

- Concrete (non structural).

- Can be used as an emergency repair plugging aid when mixed neat with cement.

Characteristics / Advantages:

- Faster finishing times even in cold weather.

- Provides frost protection down to -8°C in wet mortar.

- 0.1% chloride ion, non corrosive formula

- Optimises mould usage.

Everbuild 204 Evermix 3 in 1 - 25 Litres

Evermix 3 in 1 triple action admixture waterproofs, plasticises and retards to assist workability, reduce water penetration and allow larger areas to be covered in one application.

Product Information:

Evermix 3 in 1 is particularly formulated for use in renders, dry dash and pebble-dashing, however it can also be used in any cement mixture where waterproofing and increased workability are required in conjunction with retarded setting. 

Tested to BS4887 1973.

Everbuild 204 Evermix 3 in 1

Evermix 3 in 1 triple action admixture waterproofs, plasticises and retards to assist workability, reduce water penetration and allow larger areas to be covered in one application.

Product Information:

Evermix 3 in 1 is particularly formulated for use in renders, dry dash and pebble-dashing, however it can also be used in any cement mixture where waterproofing and increased workability are required in conjunction with retarded setting. 

Tested to BS4887 1973.

403 Concrete Hardener and Dustproofer.

403 Concrete Hardener & Dustproofer is formulated from high quality silicate resins to harden and dustproof new and old concrete floors for both interior and exterior use, it reacts chemically with the lime content of concrete to form a hard wearing surface.

Product Information:

- Fast acting.

- Dries clear.

- Leaves a residual surface to prevent further dusting.

- Easy clean up with water.

- Helps in the prevention of bloom efflorescence.

Everbuild 501 Universal PVA Bond - 1 ltr

PVA Bond is a multi-purpose bonding agent, primer, sealer, cement and plaster admixture that adheres to most common building and DIY materials.

Ideal for priming unsound surfaces prior to plastering or painting, as an adhesive on wood, cork, textiles and most applications where at least one surface is porous, for general dust sealing on flaking paintwork/walls etc and as a cement and plaster admixture.

Product Information:

- Fully conforms to BS 5270

- Improves flexibility of sand cement products

- Reduced water : cement ratio for equivalent workability

- Reduces surface porosity of mortar and plaster

- Improved frost resistance

- Size - 1 Litre

Everbuild 501 Universal PVA Bond - 5ltr

PVA Bond is a multi-purpose bonding agent, primer, sealer, cement and plaster admixture that adheres to most common building and DIY materials.

Ideal for priming unsound surfaces prior to plastering or painting, as an adhesive on wood, cork, textiles and most applications where at least one surface is porous, for general dust sealing on flaking paintwork/walls etc and as a cement and plaster admixture.

Product Information:

- Fully conforms to BS 5270

- Improves flexibility of sand cement products

- Reduced water : cement ratio for equivalent workability

- Reduces surface porosity of mortar and plaster

- Improved frost resistance

Febmix Admix - The Original SW - 5 Litres

Febmix Admix SW – The Original is an air entraining plasticiser that replaces lime in the mix. This version is a specially-designed South West formula available for use in South Wales and the West Country

Provides an easy to work “butter like” consistency to the mortar and to prevent shrinkage, cracking and crazing during the setting process.

Product Information:

- Suitable for use in brick laying and plastering mortars

- Reduces bleed and segregation of mortar

- Helps to reduce efflorescence

- Improved weather resistance and durability

- Provides a degree of frost resistance and long term resistance to freeze-thaw cycles when set

- Conforms to the requirements of EN934-3 (2009) +A1 (2012)

- Specially-designed South West formula available for use in South Wales and the West Country

- Reduces shrinkage

Feb Febond SBR - Waterproofer and Bonding Admixture - 5 Litres

Is a styrene-butadiene co-polymer latex especially designed for use with cementitious mixes. It is used in mortar and concrete as an admixture it increases water and abrasion resistance and durability. It is used with cement as a reliable water resisting bonding agent.

Product Information:

- Greatly increased flexing and tensile strength, toughness and durability, with improved abrasion resistance.

- Reduces shrinkage with an appropriate aggregate.

- Prevents bleeding.

- Lowers the water to cement ratio.

- Good frost and abrasion resistance to water borne salt penetration.

Sika Brick and Patio Cleaner - 5 Litres

Is a fast acting, acid based cleaning solution for brickwork, concrete and pavings.

Easy to use, with a powerful formula which dissolves mortar and cement stains, ingrained dirt, efflorescence and most.

paints on mineral surfaces such as brick, stone and paving materials.

Product Information:

Uses:

- Cleans stains from brickwork, natural stone, concrete and earthenware.

- Cleans stains from patios, garages, and factory floors.

- As a stain remover for brickwork & concrete.

Characteristics / Advantages:

- Removes mortar, cement, efflorescence,

- Stain remover,

- Fast acting acid based formula,

- Easy to use,

- Can be diluted to suit requirements.

Sika Release Oil - Mould Release Agent - 5 Ltr

A ready to use formwork release agent suitable for mould and shutter faces prior to casting concrete in order to achieve a clean release after removal of formwork. The resultant concrete has a smooth uniform finish with reduced incidence of blow holes.

SikaBond Waterproof PVA 5 Litres

Is a waterproof vinyl acetate polymer formulated for external uses as an adhesive and sealer, suitable for brickwork, mortar, render, screeds and plaster.

Product Information:

- Easy to use.

- Waterproof formula.

- Suitable for internal and external use.

- Doesn't emulsify when wet unlike standard PVA.

- Ideal for renders and toughening floors and screeds.