Building - Admixtures, PVA, SBR, Sealants, Additives, Chemicals & Concrete cleaning solutions.
Everbuild 202 Integral Liquid Waterproofer - 5 Ltr
202 Integral Liquid Waterproofer is a liquid additive that provides long term water protection to mortar, concrete and rendering.
Product Information:
- Reduces water permeability
- Low toxicity
- Reduces surface absorption
- Air entraining – will not “flatten” the mix
- Will not corrode steel reinforcement (brick ties etc.)
- Improves workability
- Easier application in render mixes
- Increases compressive strength
- Tested to BSEN934-Part 3
- Suitable for all applications where resistance to water absorption is necessary, such as pool and tank linings, roof areas, external rendering and pointing and structures below ground level
Everbuild 203 Accelerator and Frostproofer
Is a liquid additive formulated to accelerate setting and hardening times of mortar, concretes, screeds and rendering and providing frost protection during the setting period,
Effective even in sub zero temperatures it can also be used in normal temperatures where a rapid set is required and as a plugging admixture.
Product Information:
Uses:
- Mortars.
- Floor screeds.
- External / internal cement based rendering.
- Concrete (non structural).
- Can be used as an emergency repair plugging aid when mixed neat with cement.
Characteristics / Advantages:
- Faster finishing times even in cold weather.
- Provides frost protection down to -8°C in wet mortar.
- 0.1% chloride ion, non corrosive formula
- Optimises mould usage.
Everbuild 204 Evermix 3 in 1 - 25 Litres
Evermix 3 in 1 triple action admixture waterproofs, plasticises and retards to assist workability, reduce water penetration and allow larger areas to be covered in one application.
Product Information:
Evermix 3 in 1 is particularly formulated for use in renders, dry dash and pebble-dashing, however it can also be used in any cement mixture where waterproofing and increased workability are required in conjunction with retarded setting.
Tested to BS4887 1973.
Everbuild 204 Evermix 3 in 1
Evermix 3 in 1 triple action admixture waterproofs, plasticises and retards to assist workability, reduce water penetration and allow larger areas to be covered in one application.
Product Information:
Evermix 3 in 1 is particularly formulated for use in renders, dry dash and pebble-dashing, however it can also be used in any cement mixture where waterproofing and increased workability are required in conjunction with retarded setting.
Tested to BS4887 1973.
403 Concrete Hardener and Dustproofer.
403 Concrete Hardener & Dustproofer is formulated from high quality silicate resins to harden and dustproof new and old concrete floors for both interior and exterior use, it reacts chemically with the lime content of concrete to form a hard wearing surface.
Product Information:
- Fast acting.
- Dries clear.
- Leaves a residual surface to prevent further dusting.
- Easy clean up with water.
- Helps in the prevention of bloom efflorescence.
Everbuild 501 Universal PVA Bond - 1 ltr
PVA Bond is a multi-purpose bonding agent, primer, sealer, cement and plaster admixture that adheres to most common building and DIY materials.
Ideal for priming unsound surfaces prior to plastering or painting, as an adhesive on wood, cork, textiles and most applications where at least one surface is porous, for general dust sealing on flaking paintwork/walls etc and as a cement and plaster admixture.
Product Information:
- Fully conforms to BS 5270
- Improves flexibility of sand cement products
- Reduced water : cement ratio for equivalent workability
- Reduces surface porosity of mortar and plaster
- Improved frost resistance
- Size - 1 Litre
Everbuild 501 Universal PVA Bond - 5ltr
PVA Bond is a multi-purpose bonding agent, primer, sealer, cement and plaster admixture that adheres to most common building and DIY materials.
Ideal for priming unsound surfaces prior to plastering or painting, as an adhesive on wood, cork, textiles and most applications where at least one surface is porous, for general dust sealing on flaking paintwork/walls etc and as a cement and plaster admixture.
Product Information:
- Fully conforms to BS 5270
- Improves flexibility of sand cement products
- Reduced water : cement ratio for equivalent workability
- Reduces surface porosity of mortar and plaster
- Improved frost resistance
Everbuild 507 Quick Drying Rendagrip - 10 ltr
Everbuild 507 Rendagrip is an extra grip render bonding agent that contains a fine aggregate to provide an improved key before applying render on external surfaces such as concrete, lightweight blockwork, brick etc.
The fine aggregates are suspended in a unique waterproof polymer to ensure easy application by roller or brush and an even spread of aggregate avoiding any weak spots in the key coat and preventing the aggregate particles coming loose during application.
Product Information:
- One coat application – render when dry
- Contains a fine aggregate to improve render key
- Reduces suction on porous substrates
- Red colour to indicate coverage
- Reduces suction on porous substrates
- Improves adhesion on smooth substrates
- Can be applied to damp surfaces
- Waterproof
- Size: 10 Litres
Febmix Admix - The Original SW - 25 Litres
Febmix Admix SW – The Original is an air entraining plasticiser that replaces lime in the mix. This version is a specially-designed South West formula available for use in South Wales and the West Country
Provides an easy to work “butter like” consistency to the mortar and to prevent shrinkage, cracking and crazing during the setting process.
Product Information:
- Suitable for use in brick laying and plastering mortars
- Reduces bleed and segregation of mortar
- Helps to reduce efflorescence
- Improved weather resistance and durability
- Provides a degree of frost resistance and long term resistance to freeze-thaw cycles when set
- Conforms to the requirements of EN934-3 (2009) +A1 (2012)
- Specially-designed South West formula available for use in South Wales and the West Country
- Reduces shrinkage
Febmix Admix - The Original SW - 5 Litres
Febmix Admix SW – The Original is an air entraining plasticiser that replaces lime in the mix. This version is a specially-designed South West formula available for use in South Wales and the West Country
Provides an easy to work “butter like” consistency to the mortar and to prevent shrinkage, cracking and crazing during the setting process.
Product Information:
- Suitable for use in brick laying and plastering mortars
- Reduces bleed and segregation of mortar
- Helps to reduce efflorescence
- Improved weather resistance and durability
- Provides a degree of frost resistance and long term resistance to freeze-thaw cycles when set
- Conforms to the requirements of EN934-3 (2009) +A1 (2012)
- Specially-designed South West formula available for use in South Wales and the West Country
- Reduces shrinkage
Feb Febond SBR - Waterproofer and Bonding Admixture - 5 Litres
Is a styrene-butadiene co-polymer latex especially designed for use with cementitious mixes. It is used in mortar and concrete as an admixture it increases water and abrasion resistance and durability. It is used with cement as a reliable water resisting bonding agent.
Product Information:
- Greatly increased flexing and tensile strength, toughness and durability, with improved abrasion resistance.
- Reduces shrinkage with an appropriate aggregate.
- Prevents bleeding.
- Lowers the water to cement ratio.
- Good frost and abrasion resistance to water borne salt penetration.
Sika Brick and Patio Cleaner - 5 Litres
Is a fast acting, acid based cleaning solution for brickwork, concrete and pavings.
Easy to use, with a powerful formula which dissolves mortar and cement stains, ingrained dirt, efflorescence and most.
paints on mineral surfaces such as brick, stone and paving materials.
Product Information:
Uses:
- Cleans stains from brickwork, natural stone, concrete and earthenware.
- Cleans stains from patios, garages, and factory floors.
- As a stain remover for brickwork & concrete.
Characteristics / Advantages:
- Removes mortar, cement, efflorescence,
- Stain remover,
- Fast acting acid based formula,
- Easy to use,
- Can be diluted to suit requirements.
Sika MaxMix Concentrated Integral Waterproofer - 1 Ltr
Sika MaxMix Waterproofer is a liquid admixture for pointing, renders and screeds. It can be used in all situations where resistance to water is required such as screeds, renders, pointing and mortars. 1 litre treats up to 250kg of cement.
Product Information:
- Concentrated formula 1ltr = 25ltrs of standard waterproofer
- Controlled dosage system, resulting in no waste or spillages
- Easy to use gauged bottle
- Improves water resistance
- Increases workability
- Improved freeze thaw resistance
- Reduces efflorescence
Sika MaxMix Concentrated Mortar Plasticiser - 1 Ltr
Sika MaxMix Plasticiser is a liquid air entraining agent for brick laying mortars, renders, pointing and screeds. It can be used in all situations where improved work-ability is required. 1 Litre treats up to 5 tons of cement.
Product Information:
- Concentrated formula. 1 L is equivalent to 25 L of standard mortar plasticiser
- Easy to use gauged bottle
- Superior plasticising action
- Improves workability of mortars
- Increased frost resistance
- Minimises cracking
Sika MaxMix Frostproofer and Accelerator - 1 Ltr
Sika MaxMix Frostproofer is a highly concentrated, chloride free, air entraining admix which is designed specifically for cold weather working, eliminating the requirement for a second frostproofing admix. Sika MaxMix Frostproofer reduces the setting time of sand and cement based mortars, renders, screeds etc and is the ideal choice for a cold weather admix providing frost protection below –4 °C. Being chloride free, Sika MaxMix Frostproofer will not attack embedded steel and hence is suitable for use with brick ties etc.
Product Information:
- Fast acting powerful formula - 1 Litre treats up to 100 kg of cement
- Reduces water absorption and penetration
- Improves workability and accelerates set
- Protects in subzero temperatures
- Easy to use, controlled dosage system, so no waste or spillages
Sika Release Oil - Mould Release Agent - 5 Ltr
A ready to use formwork release agent suitable for mould and shutter faces prior to casting concrete in order to achieve a clean release after removal of formwork. The resultant concrete has a smooth uniform finish with reduced incidence of blow holes.
SikaBond Waterproof PVA 5 Litres
Is a waterproof vinyl acetate polymer formulated for external uses as an adhesive and sealer, suitable for brickwork, mortar, render, screeds and plaster.
Product Information:
- Easy to use.
- Waterproof formula.
- Suitable for internal and external use.
- Doesn't emulsify when wet unlike standard PVA.
- Ideal for renders and toughening floors and screeds.
Wykamol Tanking Slurry - 20kg Bag in a Bucket BBA - Coverage approx 7sqm per tub
Wykamol Tanking Slurry is a cementitious waterproofing system which creates a monolithic bond using crystalline chemicals when applied to concrete and masonry structures. BBA and WRAS approved. Can also be used as a radon barrier with appropriate application.
When mixed with clean water and applied correctly, Wykamol Tanking Slurry forms a permanent waterproof coating to the concrete and masonry and is easily applied by brush, roller or spray.
Tanking Slurry waterproofs against positive and negative hydrostatic heads of water and is suitable for use, internally, externally, above and below ground. Tanking slurry is ideal for use as part of a damp-proofing course (DPC).
Typical Uses:
Product Information: