76mm x 50mm x 2mm Grade 7 Fire Door Hinges - Epoxy Black

Thunderbolt Masonry Fixing - Priced Per Bolt

Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone.

It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications.

The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt.

Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.

Product Information:

- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust.

- Remove any loose debris from the hole.

- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action.

- Tighten the Thunderbolt™ to secure the fixture firmly in place.

18mm OSB3 External Grade Composite Board - 2440mm x 1220mm

Oriented Strand Board (OSB) is an engineered wood based panel board where strands of wood are laid in cross-oriented layers and glued with an ECO resin. This results in a strong board that resists moisture, is versatile, and suitable for structural use in humid conditions.

Product Information:

- OSB3: Suitable for fibreglass roofing.

- Also known as Sterling Board

- Size: 2440mm x 1220mm.

- Thickness: 18mm

Fence Staples Galvanised Steel - 15mm x 1.6mm x 500g

Staples are commonly used for securing wire to fence posts, especially in the agricultural sector. They are galvanised for protection against exposure to wet conditions.

Product Information:

- Galvanised steel.

- Length: 15mm.

- Weight: 0.5kg bag.

4" Tower Bolt - Black Finish

Product Information:

- Finish: Black japanned

- Lengths: 101mm

Classic Multi-Purpose Screws - PZ - Double Countersunk - A2 Stainless Steel - 4 x 40mm

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipb oard, M DF and p lastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

Product Information:

- Double countersunk reduces the likelihood of head shear and assists completion of countersinking

- 40° deep single thread to provide a secure fixing with high pull-out resistance

- Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge

- All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length