50mm x 75mm (Nominal) Planed Redwood Timber 3.6mtr

19mm x 100mm PTGV Redwood Treated UC3 Cladding - 4.8 Metres

Ideal for exterior purposes such as soffits.

Product Information:

- Country of origin: Sweden

- Material: European redwood spruce

- FSC certified

- Kiln dried: Moisture content 15% > 18%

- Treatment: UC3

- Surface finish: Planed moulded

- Application: Profiled for horizontal or vertical fixing (PTG / V joint)

- Machined from / size: 19mm x 100mm

- Finished size: 15mm x 95mm

- Coverage: 87mm (11.49 metres / per sq metre)

O'Brien Post Mix 20kg Bag

O’Brien Cement Post Mix is a simple to use rapid setting concrete mix for fixing posts in the ground. It is pre-mixed and blended and contains cement, dried aggregates and admixtures. The cement used is O’Brien Cement manufactured in Ireland and conforms to I.S EN 197-1 2011.

Product Information:

1. 1. Dig a hole to required size for post, half fill the hole with water and place the post in the hole,
2. 2. Tip the pre-mixed aggregate uniformly into the hole around the post, until it is above the level of water,
3. 3. If any dry powder remains visible at this stage, add additional water until absorbed by the material,
4. 4. Adjust the post into position and support appropriately until material set occurs, which takes approximately 10 minutes.

19mm x 100mm PTGV Redwood Treated UC3 Cladding - 5.4 Metres

Ideal for exterior purposes such as soffits.

Product Information:

- Country of origin: Sweden

- Material: European redwood spruce

- FSC certified

- Kiln dried: Moisture content 15% > 18%

- Treatment: UC3

- Surface finish: Planed moulded

- Application: Profiled for horizontal or vertical fixing (PTG / V joint)

- Machined from / size: 19mm x 100mm

- Finished size: 15mm x 95mm

- Coverage: 87mm (11.49 metres / per sq metre)

12mm Plywood Hardwood Faced Sheet - 2440mm x 1220mm

Hardwood Faced Plywood is a strong and versatile wood material, ideal for both indoor and outdoor DIY projects such as furniture, cabinetry, and construction. Crafted with an exterior-grade hardwood veneer, it offers a sturdy and dependable base for any woodworking or home improvement task, designed to endure various conditions.

Hardboard Sheet 3.2mm x 1220mm x 2400mm

Light, versatile, high density non-structural panel and are ideal for floor covering, furniture manufacture, packaging, and general DIY.

Product Information:

- Size: 2440mm x 1220mm

- Thickness: 3.2mm

Standard Plasterboard - Square Edge - 12.5mm x 1200mm x 2400mm

Product Information:

- For ceilings and forming partitions.

- Can be decorated directly or coated with thistle plaster finish.

- Easy to score and snap with a clean cut edge for quick use.

- Ivory paper faced for ease of identification.

- Can be fixed in single or multiple layers which increases acoustic and fire performance.

- Easily fixed on to a wide range of materials with drywall fixings or adhesive.

- 12.5mm thick x 1200mm wide x 2400mm long.

- Square edged.

25mm x 38mm Roofing Batten Treated - 4.8 metres

Roofing batten type A produced in Sweden BS 8417 Certified.

Product Information:

- Country of origin: Sweden

- Species: Spruce

- Grade: BS 8417 certified

- Moisture content: Kiln dried (18% approx.)

- Treatment: UC2

- Colour: Green

- Surface finish: Sawn

- Machined from / size: 25mm x 38mm

- Length: 4.8mts

UC3 Pressure Treated Sawn Timber - 22mm x 225mm - 4.8 Metres

This timber is mainly used for fencing but has other suitable applications.

Product Information:

- Country of origin: UK

- Species: Spruce

- Grade: Ungraded

- Surface finish: Sawn

- Colour: Green

- Treatment: UC3

- Size: 22mm x 225mm

- Length: 4.8mts

Redwood Timber - 50mm x 175mm (Planed) - 1.2 Metres

This redwood timber is used for various construction purposes and is of excellent quality originating from Sweden.

Product Information:

- Country of origin: Sweden

- Material: European Redwood Spruce

- Kiln dried: 15% > 18%

- Surface finish: Planed

- Machined from / size: 50mm x 175mm

- Finished size: 45mm x 170mm

- Length: 1.2mts

12" Medium Tee Hinge - Galvanised (Per Pair)

Ideal for exterior gates and interior use.

Product Information:

- Style: T hinge

- Finish: Galvanised

- Sizes: 300mm

- Price shown is per pair