5 x 80mm Velocity Premium Multi Purpose Screw (Tub 350)

38mm x 88mm Fencing Rail Treated UC3 Green - 2.4mtr

This timber is mainly used for fencing rails but has other suitable applications.

Product Information: Premium Quality!

- Country of origin: UK

- Species: Spruce

- Grade: Ungraded

- Surface finish: Sawn

- Colour: Green

- Treatment: UC3

- Size: 38mm x 88mm

- Length: 2.4 metre

38mm x 88mm Fencing Rail Treated UC3 Green - 3.6mtr

This timber is mainly used for fencing rails but has other suitable applications.

Product Information: Premium Quality!

- Country of origin: UK

- Species: Spruce

- Grade: Ungraded

- Surface finish: Sawn

- Colour: Green

- Treatment: UC3

- Size: 38mm x 88mm

- Length: 3.6 metre

Thunderbolt Masonry Fixing - Priced Per Bolt

Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone. It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications. The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt. Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.

Product Information:

- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust

- Remove any loose debris from the hole

- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action

- Tighten the Thunderbolt™ to secure the fixture firmly in place

O'Brien Post Mix 20kg Bag

O’Brien Cement Post Mix is a simple to use rapid setting concrete mix for fixing posts in the ground. It is pre-mixed and blended and contains cement, dried aggregates and admixtures. The cement used is O’Brien Cement manufactured in Ireland and conforms to I.S EN 197-1 2011.

Product Information:

1. 1. Dig a hole to required size for post, half fill the hole with water and place the post in the hole,
2. 2. Tip the pre-mixed aggregate uniformly into the hole around the post, until it is above the level of water,
3. 3. If any dry powder remains visible at this stage, add additional water until absorbed by the material,
4. 4. Adjust the post into position and support appropriately until material set occurs, which takes approximately 10 minutes.

38mm x 63mm Capping Rail Treated Green - 3.6mtr

For finishing the top edge of a fence.

Product Information:

- Material: UK softwood

- Finish: Sawn

- Treatment: UC3

- Colour: Green

- Width: 63mm

- Thickness: 38mm

- Length: 3.6mts

Steel Hex Nut - BZP - 10mm

Full nuts are applied to a matching male thread (examples include bolts, set screws and machine screws) and tighten two or more component parts together.

Product Information:

- Hexagon fits corresponding sockets and spanners.

Square Plate Washer - BZP - 10mm

Product Information:

- Used with all fasteners for larger load distribution, e.g. bolting through a wall

- Round hole

- Zinc coated for corrosion resistance

- External size: 40mm x 40mm

- Thickness: 3.0mm

Flush Fit Bolt Down Shoe - Hot Dipped Galvanised - 100mm

Flush fit bolt down fence post shoes are a quick and easy way to erect fencing and garden posts as they require no digging or concreting into place, saving time and money. They are designed to be fixed down onto an existing concrete base or wall and are perfect for patio fencing, decking, pergolas or car ports where the post needs to be fitted flush against a wall. The bolt secure version features 2x 8mm carriage bolts.

Product Information:

- Prevents against post rot and decay as it will hold the base of the post above ground level

- Hot dipped galvanised for maximum rust protection

- Can be painted over

OSB3 T & G 18mm External Grade Boards

Oriented Strand Board (OSB) is an engineered wood based panel board where strands of wood are laid in cross-oriented layers and glued with an ECO resin.

This results in a strong board that resists moisture, is versatile, and suitable for structural use in humid conditions.

Product Information:

- Profile: Tongue & groove

- OSB3: Suitable for fibreglass roofing

- Size: 2400mm x 600mm

- Thickness: 18mm

Plasterboard Moisture Resistant Taper Edge 12.5mm x 1200mm x 2400mm

Moisture Resistant plasterboard is designed to tolerate humid and moisture conditions, It has silicone additives and water repellent liners which create a product that is suitable for use in kitchens, bathrooms, plus areas where levels of humidity are high.

Product Information:

- Increased moisture resistance over standard plasterboard

- Has water repellent additives in the paper liners and core

- Suitable for use on external soffits in sheltered positions

- Perfect for kitchen walls, bathrooms, and ceilings

- 12.5mm thick x 1200mm wide x 2400mm long

- Taper edged