5 x 45mm Velocity Premium Multi Purpose Screw - (200)

19mm x 38mm Roofing Batten Treated - 4.8 metres

Roofing batten type A produced in Sweden BS 8417 Certified.

Product Information:

- Country of origin: Sweden

- Species: Spruce

- Grade: BS 8417 certified

- Moisture content: Kiln dried (18% approx.)

- Treatment: UC2

- Colour: Green

- Surface finish: Sawn

- Machined from / size: 19mm x 38mm

- Length: 4.8mts

O'Brien Post Mix 20kg Bag

O’Brien Cement Post Mix is a simple to use rapid setting concrete mix for fixing posts in the ground. It is pre-mixed and blended and contains cement, dried aggregates and admixtures. The cement used is O’Brien Cement manufactured in Ireland and conforms to I.S EN 197-1 2011.

Product Information:

1. 1. Dig a hole to required size for post, half fill the hole with water and place the post in the hole,
2. 2. Tip the pre-mixed aggregate uniformly into the hole around the post, until it is above the level of water,
3. 3. If any dry powder remains visible at this stage, add additional water until absorbed by the material,
4. 4. Adjust the post into position and support appropriately until material set occurs, which takes approximately 10 minutes.

UC3 Treated Sawn Timber - 75mm x 75mm - 1.8 Metres

Treated 3" x 3" Sawn green fence post.

Product Information: Premium Quality!

- Country of origin: UK

- Species: Spruce

- Surface finish: Rough sawn

- Treatment: UC3

- Colour: Green

- Machined from / size: 75mm x 75mm

- Length: 1.8mts

UC3 Pressure Treated Sawn Timber - 22mm x 200mm - 4.8 Metres

This timber is mainly used for fencing but has other suitable applications.

Product Information:

- Country of origin: UK

- Species: Spruce

- Grade: Ungraded

- Surface finish: Sawn

- Colour: Green

- Treatment: UC3

- Size: 22mm x 200mm

- Length: 4.8mts

4.0 x 30mm Velocity Premium Multi Purpose Screw (Pack of 200)

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications.

Product Information:

- Dual angle thread designed for superior hold

- Rapid drive twist cut enhances drive performance

- Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque.