5 x 100mm Velocity Premium Multi Purpose Screw - (100)

Concrete Block 100mm (4") Thick

This dense concrete block offers durability and reliability, making it ideal for both internal and external applications, including load-bearing walls and cavity walls.

Product Information:

- 100 mm thick concrete block for construction purposes 7.3 N

- Size: 440mm long x 215mm high x 100mm depth

- 10 Blocks per sq metre (Including 10mm mortar joint)

- Full packs of concrete blocks will be delivered by one of our crane vehicles (72 Blocks = Full Pack)

Dense Concrete Block - 140mm Thick

This 140mm concrete block offers durability and reliability, making it ideal for both internal and external applications, including load-bearing walls and cavity walls.

Product Information:

- 140 mm thick concrete block for construction purposes 7.3 N

- Size: 440mm long x 215mm high x 140mm depth

- 10 blocks per sq metre (including 10mm mortar joint)

- Full packs of concrete blocks will be delivered by one of our crane vehicles (48 Blocks = Full Pack)

Thunderbolt Masonry Fixing - Priced Per Bolt

Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone. It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications. The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt. Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.

Product Information:

- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust

- Remove any loose debris from the hole

- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action

- Tighten the Thunderbolt™ to secure the fixture firmly in place

18mm Chipboard Loft Storage Boards Square Edged - 2350mm x 550mm

Chipboard for loft storage moisture resistant flooring quality square edged 2350mm x 550mm x 18mm

Please note: These boards have been cut down to be Square Edged, this may impact the moisture resistance of the board.

Product Information:

- Chipboard square edged

- 18mm x 2350mm x 550mm

Half Round 100mm Treated Green Fence Post - 3.6mtr

Rounded pressure treated Green half round 100mm diameter x 3.6mts long.

Product Information:

- Profile: Half Round

- Treatment: UC3

- Colour: Green

- Diameter: 100mm

- Length: 3.6mts

O'Brien Post Mix 20kg Bag

O’Brien Cement Post Mix is a simple to use rapid setting concrete mix for fixing posts in the ground. It is pre-mixed and blended and contains cement, dried aggregates and admixtures. The cement used is O’Brien Cement manufactured in Ireland and conforms to I.S EN 197-1 2011.

Product Information:

1. 1. Dig a hole to required size for post, half fill the hole with water and place the post in the hole,
2. 2. Tip the pre-mixed aggregate uniformly into the hole around the post, until it is above the level of water,
3. 3. If any dry powder remains visible at this stage, add additional water until absorbed by the material,
4. 4. Adjust the post into position and support appropriately until material set occurs, which takes approximately 10 minutes.

38mm x 88mm Fencing Rail Treated UC3 Green - 3.6mtr

This timber is mainly used for fencing rails but has other suitable applications.

Product Information: Premium Quality!

- Country of origin: UK

- Species: Spruce

- Grade: Ungraded

- Surface finish: Sawn

- Colour: Green

- Treatment: UC3

- Size: 38mm x 88mm

- Length: 3.6 metre

38mm x 88mm Fencing Rail Treated UC3 Green - 2.4mtr

This timber is mainly used for fencing rails but has other suitable applications.

Product Information: Premium Quality!

- Country of origin: UK

- Species: Spruce

- Grade: Ungraded

- Surface finish: Sawn

- Colour: Green

- Treatment: UC3

- Size: 38mm x 88mm

- Length: 2.4 metre

Steel Hex Nut - BZP - 8mm

Full nuts are applied to a matching male thread (examples include bolts, set screws and machine screws) and tighten two or more component parts together.

Product Information:

- Hexagon fits corresponding sockets and spanners.

10mm Steel Washer - BZP - M10

Used under the head of a bolt or nut to distribute the forces applied when tightening

Product Information:

- External Diameter: 24mm

- Thickness: 2.0mm

- Finish: BZP