47mm Simpsons Mini Timber Hanger

Concrete Block 100mm (4") Thick

This dense concrete block offers durability and reliability, making it ideal for both internal and external applications, including load-bearing walls and cavity walls.

Product Information:

- 100 mm thick concrete block for construction purposes 7.3 N

- Size: 440mm long x 215mm high x 100mm depth

- 10 Blocks per sq metre (Including 10mm mortar joint)

- Full packs of concrete blocks will be delivered by one of our crane vehicles (72 Blocks = Full Pack)

Truss Clip - 47mm

The TCP truss clip attaches girders, trusses and rafters to wall plates to provide wind restraint.

Product Information:

- TCP Truss Clips may be used for general purposes, to resist uplift wherever one member crosses another.

- Speed prong provides temporary attachment for ease of installation.

- Obround holes for easier nail driving.

- Pre-galvanised mild steel

Cement 25kg Supplied in a Weatherproof Plastic Bag

O'Brien premium grade cement for jobs which require higher strength cement, such as screeds, concrete, plastering and mortar, this premium grade product is ideal.

Product Information:

- Smooth, uniform finish, and impressive drying performance.

- Premium grade O'Brien cement with 42.5N strength which offers exceptional performance.

- Supplied in a plastic based bag.

Thunderbolt Masonry Fixing - Priced Per Bolt

Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone. It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications. The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt. Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.

Product Information:

- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust

- Remove any loose debris from the hole

- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action

- Tighten the Thunderbolt™ to secure the fixture firmly in place

Simpson Strong-Tie Adjustable Angle Bracket - 70mm x 55mm x 30mm

EFIXR angle brackets are intended for all assemblies for the design and installation of interior and exterior joinery. EFIXR stiffener improves rigidity particularly for large models.

Material:

- Galvanized steel S250GD + Z275 according to NF EN 10346.

19mm x 38mm Roofing Batten Treated - 4.8 metres

Roofing batten type A produced in Sweden BS 8417 Certified.

Product Information:

- Country of origin: Sweden

- Species: Spruce

- Grade: BS 8417 certified

- Moisture content: Kiln dried (18% approx.)

- Treatment: UC2

- Colour: Green

- Surface finish: Sawn

- Machined from / size: 19mm x 38mm

- Length: 4.8mts

Onduline Corrugated Roofing Sheet Black - 2mts x 950mm x 3mm

Onduline is an extremely tough, lightweight, corrugated roofing and wall cladding material manufactured utilising a base board produced from recycled cellulose fibres which is saturated with bitumen under intense pressure and heat.

Onduline sheets are finished with a colour pigment and resin impregnation process which stains the colour into the sheet to provide excellent colour retention properties and enhanced U.V. resistance.

Product Information:

- Bituminous black corrugated roofing system

- Thermal resistance R value: 0.04mK/W

- Corrugation height: 38mm

- Corrugation width: 95mm

- Recommendation: 30 fixings per sheet

- Length: 2000mm

- Width: 950mm

- Thickness: 3mm

- Cover width: 855mm

- Colour: Black

Onduline Eaves Foam Filler

For use with Onduline Corrugated Roofing sheets, these polyethylene eaves filler units seal the corrugations at eaves and ridges, preventing the ingress of water, dust and draughts.

Onduline eaves fillers are a simple accessory for adding further protections to your outdoor and DIY project with minimal hassle.

Product Information:

- Length: 900mm

O'Brien Post Mix 20kg Bag

O’Brien Cement Post Mix is a simple to use rapid setting concrete mix for fixing posts in the ground. It is pre-mixed and blended and contains cement, dried aggregates and admixtures. The cement used is O’Brien Cement manufactured in Ireland and conforms to I.S EN 197-1 2011.

Product Information:

1. 1. Dig a hole to required size for post, half fill the hole with water and place the post in the hole,
2. 2. Tip the pre-mixed aggregate uniformly into the hole around the post, until it is above the level of water,
3. 3. If any dry powder remains visible at this stage, add additional water until absorbed by the material,
4. 4. Adjust the post into position and support appropriately until material set occurs, which takes approximately 10 minutes.

Thunderbolt Masonry Fixing - Priced Per Bolt

Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone. It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications. The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt. Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.

Product Information:

- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust

- Remove any loose debris from the hole

- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action

- Tighten the Thunderbolt™ to secure the fixture firmly in place