40 x 3.75mm Square Twist Nails (Galvanised) - 500g

Mini Hanger - 47mm

The MHA is a galvanised mini joist hanger suitable for use with regularised timber, rough sawn timber, I-Joists and LVL.

Ideally suited for small timber sections and timber members; such as trimmers and ceiling joists.

Product Information:

- Pre-galvanised mild steel.

Joist Hanger with Adjustable Height Strap - 47mm x 270mm

Height adjustable joist hanger for supporting timber joists from timber members.

Product Information:

- A galvanised joist hanger that provides great support with ease of installation.

- Wider strap provides more surface area on the supporting timber and allows increased nail spacing, enhancing the performance of the critical hanger-to-support part of the connection.

- Minimum and maximum nailing schedules are stamped into the strap providing correct installation information for site operatives.

- Speed-prong holds the hanger in position to allow easier attachment. The installer no longer has to try to hold hanger, joist and nail with one hand and swing a hammer with the other!

- JHA270 range features a location tab which allows easier alignment of the hanger.

- The model number and size is stamped into the seat of the hanger for easy identification, even after installation.

- Pre-galvanised mild steel.

Suitable on:

- Solid sawn timber joists.

Thunderbolt Masonry Fixing - Priced Per Bolt

Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone.

It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications.

The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt.

Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.

Product Information:

- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust.

- Remove any loose debris from the hole.

- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action.

- Tighten the Thunderbolt™ to secure the fixture firmly in place.

Thunderbolt Masonry Fixing - Priced Per Bolt

Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone.

It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications.

The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt.

Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.

Product Information:

- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust.

- Remove any loose debris from the hole.

- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action.

- Tighten the Thunderbolt™ to secure the fixture firmly in place.

Boltdown Shoe - Hot Dipped Galvanised - 100mm

Bolt down fence post shoes are a quick and easy way to erect fencing and garden posts as they require no digging or concreting into place, saving time and money. Designed to be fixed down onto an existing concrete base or wall and are perfect for patio fencing, decking, pergolas or car ports. The bolt secure version features 2x 8mm carriage bolts that tighten and clamp the post firmly into the post holder section to prevent any post movement.

Product Information:

- Prevents against post rot and decay as it will hold the base of the post above ground level

- Hot dipped galvanised for maximum rust protection

- Can be painted over

UC3 Treated Sawn Timber - 100mm x 100mm - 3.6 Metres

Treated 4" x 4" Sawn green fence post.

Product Information:

- Country of origin: UK

- Species: Spruce

- Surface finish: Rough sawn

- Treatment: UC3

- Colour: Green

- Machined from / size: 100mm x 100mm

- Length: 3.6mts

30 x 3.75mm Square Twist Nails (Galvanised) - 500g

Square Twist Nails are an extra strong hardened nail used for fixing joist hangers and restraint straps. They are coated for protection against exposure to damp conditions.

Product Information:

- Length: 30mm

- Finish: Galvanised

- Pack size: 500g

Timco Brown Plastic Wall Plugs - 36mm (Box of 100)

Suitable for all kinds of concrete and masonry substrate materials. Ideal for medium and lightweight applications.

NOTE: It may be beneficial to reduce drill diameter in soft materials.

Product Information:

- Carton Quantity: 100

- Length: 36mm