4 x 30mm Velocity Premium Multi Purpose Screw - (200)

6mm Plywood Hardwood Faced Sheet - 2440mm x 1220mm

Hardwood Faced Plywood is a strong and versatile wood material, ideal for both indoor and outdoor DIY projects such as furniture, cabinetry, and construction. Crafted with an exterior-grade hardwood veneer, it offers a sturdy and dependable base for any woodworking or home improvement task, designed to endure various conditions.

19mm x 100mm PTGV Redwood Treated UC3 Cladding - 5.4 Metres

Ideal for exterior purposes such as soffits.

Product Information:

- Country of origin: Sweden

- Material: European redwood spruce

- FSC certified

- Kiln dried: Moisture content 15% > 18%

- Treatment: UC3

- Surface finish: Planed moulded

- Application: Profiled for horizontal or vertical fixing (PTG / V joint)

- Machined from / size: 19mm x 100mm

- Finished size: 15mm x 95mm

- Coverage: 87mm (11.49 metres / per sq metre)

19mm x 38mm Roofing Batten Treated - 4.8 metres

Roofing batten type A produced in Sweden BS 8417 Certified.

Product Information:

- Country of origin: Sweden

- Species: Spruce

- Grade: BS 8417 certified

- Moisture content: Kiln dried (18% approx.)

- Treatment: UC2

- Colour: Green

- Surface finish: Sawn

- Machined from / size: 19mm x 38mm

- Length: 4.8mts

Redwood Timber - 25mm x 25mm (Planed) - 5.1 Metres

This redwood timber is used for various construction purposes and is of excellent quality originating from Sweden.

Product Information:

- Country of origin: Sweden

- Material: European Redwood Spruce

- Kiln dried: 15% > 18%

- Surface finish: Planed

- Machined from / size: 25mm x 25mm

- Finished size: 20mm x 20mm

- Length: 5.1mts

OSB3 T & G 18mm External Grade Boards

Oriented Strand Board (OSB) is an engineered wood based panel board where strands of wood are laid in cross-oriented layers and glued with an ECO resin.

This results in a strong board that resists moisture, is versatile, and suitable for structural use in humid conditions.

Product Information:

- Profile: Tongue & groove

- OSB3: Suitable for fibreglass roofing

- Size: 2400mm x 600mm

- Thickness: 18mm

Simpson Strong-Tie Light Duty Angle Bracket - 40mm x 40mm

Light angle brackets are used in a large number of DIY applications and are commonly used for reinforcing furniture assemblies.

Material:

- Steel S235JR according to NF EN 10025, electro-galvanized finish.

Double Steel Washered Butt Hinge - Solid Brass - Polished Chrome - 76mm x 50mm

Ideal for hanging internal doors in domestic applications.

Product Information:

- Double washers prevent knuckle wear for long lasting performance

- Economy steel pin and washers

- Hinge manufactured from solid brass to guarantee no rust and a superior finish

Thunderbolt Masonry Fixing - Priced Per Bolt

Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone. It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications. The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt. Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.

Product Information:

- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust

- Remove any loose debris from the hole

- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action

- Tighten the Thunderbolt™ to secure the fixture firmly in place

O'Brien Post Mix 20kg Bag

O’Brien Cement Post Mix is a simple to use rapid setting concrete mix for fixing posts in the ground. It is pre-mixed and blended and contains cement, dried aggregates and admixtures. The cement used is O’Brien Cement manufactured in Ireland and conforms to I.S EN 197-1 2011.

Product Information:

1. 1. Dig a hole to required size for post, half fill the hole with water and place the post in the hole,
2. 2. Tip the pre-mixed aggregate uniformly into the hole around the post, until it is above the level of water,
3. 3. If any dry powder remains visible at this stage, add additional water until absorbed by the material,
4. 4. Adjust the post into position and support appropriately until material set occurs, which takes approximately 10 minutes.

4.0 x 50mm Velocity Premium Multi Purpose Screw (Pack of 200)

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications.

Product Information:

- Dual angle thread designed for superior hold

- Partially threaded stops the timber jacking.

- Rapid drive twist cut enhances drive performance

- Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque.