3.75 x 30mm Galv Simpsons Square Twist Nails (Sheradised) - 1kg

Joist Hanger with Adjustable Height Strap - 47mm x 270mm

Height adjustable joist hanger for supporting timber joists from timber members.

Product Information:

- A galvanised joist hanger that provides great support with ease of installation.

- Wider strap provides more surface area on the supporting timber and allows increased nail spacing, enhancing the performance of the critical hanger-to-support part of the connection.

- Minimum and maximum nailing schedules are stamped into the strap providing correct installation information for site operatives.

- Speed-prong holds the hanger in position to allow easier attachment. The installer no longer has to try to hold hanger, joist and nail with one hand and swing a hammer with the other!

- JHA270 range features a location tab which allows easier alignment of the hanger.

- The model number and size is stamped into the seat of the hanger for easy identification, even after installation.

- Pre-galvanised mild steel.

Suitable on:

- Solid sawn timber joists.

Truss Clip - 47mm

The TCP truss clip attaches girders, trusses and rafters to wall plates to provide wind restraint.

Product Information:

- TCP Truss Clips may be used for general purposes, to resist uplift wherever one member crosses another.

- Speed prong provides temporary attachment for ease of installation.

- Obround holes for easier nail driving.

- Pre-galvanised mild steel

OSB3 T & G 18mm External Grade Boards

Oriented Strand Board (OSB) is an engineered wood based panel board where strands of wood are laid in cross-oriented layers and glued with an ECO resin.

This results in a strong board that resists moisture, is versatile, and suitable for structural use in humid conditions.

Product Information:

- Profile: Tongue & groove

- OSB3: Suitable for fibreglass roofing

- Size: 2400mm x 600mm

- Thickness: 18mm

Mini Hanger - 47mm

The MHA is a galvanised mini joist hanger suitable for use with regularised timber, rough sawn timber, I-Joists and LVL.

Ideally suited for small timber sections and timber members; such as trimmers and ceiling joists.

Product Information:

- Pre-galvanised mild steel.

Simpson Strong-Tie ABR90 Heavy Duty Angle Bracket - 70mm x 90mm 

Reinforced angle brackets are suitable for structural applications in framing and wood-frame houses.

Material:

- Pre-galvanised mild steel.

Benefits:

• Load capacity in all directions
• Improved capacities for full and partial nailing

Suitable On:

- Supporting member: solid wood, glued-laminated wood, concrete, steel, etc.

- Supported member: solid wood, composite lumber, glued-laminated wood, triangular trusses, profiles, etc.

When to Use:

- Fastening of small trusses.

- Cladding plates, cladding uprights.

- Rafter anchors, cantilevers, headers, etc.

18mm OSB3 External Grade Composite Board - 2440mm x 1220mm

Oriented Strand Board (OSB) is an engineered wood based panel board where strands of wood are laid in cross-oriented layers and glued with an ECO resin. This results in a strong board that resists moisture, is versatile, and suitable for structural use in humid conditions.

Product Information:

- OSB3: Suitable for fibreglass roofing.

- Also known as Sterling Board

- Size: 2440mm x 1220mm.

- Thickness: 18mm

Cement 25kg Supplied in a Weatherproof Plastic Bag

O'Brien premium grade cement for jobs which require higher strength cement, such as screeds, concrete, plastering and mortar, this premium grade product is ideal.

Product Information:

- Smooth, uniform finish, and impressive drying performance.

- Premium grade O'Brien cement with 42.5N strength which offers exceptional performance.

- Supplied in a plastic based bag.

Insulation Sheets PIR Urethane 2400mm x 1200mm x 100mm

PIR is made by blending together two primary chemicals and other materials to form a rigid foam product.

The heat generated during the reaction enable gases to evaporate and become trapped within cells delivering premium thermal performance characteristics.

Product Information:

- For insulation

- Easy to handle and install

- Lowers energy use

- Resists water vapour

- Size: 2400mm x 1200mm

- Thickness: 100mm

UC3 Treated Sawn Timber - 75mm x 75mm - 2.1 Metres

Treated 3" x 3" Sawn green fence post.

Product Information: Premium Quality!

- Country of origin: UK

- Species: Spruce

- Surface finish: Rough sawn

- Treatment: UC3

- Colour: Green

- Machined from / size: 75mm x 75mm

- Length: 2.1mts