25mm x 125mm (Nominal) Treated Green Redwood Loglap Cladding 4.8mtr

11mm OSB3 External Grade Composite Board - 2440mm x 1220mm

Oriented Strand Board (OSB) is an engineered wood based panel board where strands of wood are laid in cross-oriented layers and glued with an ECO resin. This results in a strong board that resists moisture, is versatile, and suitable for structural use in humid conditions.

Product Information:

- OSB3: Suitable for fibreglass roofing.

- Also known as Sterling Board

- Size: 2440mm x 1220mm.

- Thickness: 11mm

UC3 Treated Sawn Timber - 75mm x 75mm - 2.4 Metres

Treated 3" x 3" Sawn green fence post.

Product Information: Premium Quality!

- Country of origin: UK

- Species: Spruce

- Surface finish: Rough sawn

- Treatment: UC3

- Colour: Green

- Machined from / size: 75mm x 75mm

- Length: 2.4mts

CLS Timber Studding 50mm x 75mm - 4.8 Metres

Used for internal stud work, partitions, framing and other applications.

Product Information:

- Country of origin: Sweden

- Species: Spruce

- Moisture content: Kiln dried (18% approx)

- Grade: C16 regularised (eased edges)

- Surface finish: Semi-Planed

- Machined from / size: 50mm x 75mm

- Finished size: 38mm x 63mm

- Length: 4.8mts

Insulation Sheets PIR Urethane 2400mm x 1200mm x 50mm

PIR is made by blending together two primary chemicals and other materials to form a rigid foam product.

The heat generated during the reaction enable gases to evaporate and become trapped within cells delivering premium thermal performance characteristics.

Product Information:

- For insulation

- Easy to handle and install

- Lowers energy use

- Resists water vapour

- Size: 2400mm x 1200mm

- Thickness: 50mm

12mm x 15mm Ovolo Pine Glass Bead - 2.4mts

Glass beads and window beading are an ideal solution to add a decorated finish while helping glass panels be held in place.

Product Information:

- The ovolo glass bead has a distinct style with a rounded edge which meats a straight edge

- Install your glass bead using adhesive or pins

- This product is made to the highest quality.

- Made using a lightweight, straight grained softwood which is easy to work with. Due to its strength, elasticity and relatively low cost, pine is a popular choice to be used in a variety of projects.

- To finish off pine, lightly sand before applying wood stain, varnish or a lacquer

Redwood Timber - 25mm x 100mm (Planed) - 4.2 Metres

This redwood timber is used for various construction purposes and is of excellent quality originating from Sweden.

Product Information:

- Country of origin: Sweden

- Material: European Redwood Spruce

- Kiln dried: 15% > 18%

- Surface finish: Planed

- Machined from / size: 25mm x 100mm

- Finished size: 20mm x 95mm

- Length: 4.2 Metres

O'Brien Post Mix 20kg Bag

O’Brien Cement Post Mix is a simple to use rapid setting concrete mix for fixing posts in the ground. It is pre-mixed and blended and contains cement, dried aggregates and admixtures. The cement used is O’Brien Cement manufactured in Ireland and conforms to I.S EN 197-1 2011.

Product Information:

1. 1. Dig a hole to required size for post, half fill the hole with water and place the post in the hole,
2. 2. Tip the pre-mixed aggregate uniformly into the hole around the post, until it is above the level of water,
3. 3. If any dry powder remains visible at this stage, add additional water until absorbed by the material,
4. 4. Adjust the post into position and support appropriately until material set occurs, which takes approximately 10 minutes.

UC3 Pressure Treated Sawn Timber - 22mm x 175mm - 4.8 Metres

This timber is mainly used for fencing but has other suitable applications.

Product Information:

- Country of origin: UK

- Species: Spruce

- Grade: Ungraded

- Surface finish: Sawn

- Colour: Green

- Treatment: UC3

- Size: 22mm x 175mm

- Length: 4.8mts

18mm OSB3 External Grade Composite Board - 2440mm x 1220mm

Oriented Strand Board (OSB) is an engineered wood based panel board where strands of wood are laid in cross-oriented layers and glued with an ECO resin. This results in a strong board that resists moisture, is versatile, and suitable for structural use in humid conditions.

Product Information:

- OSB3: Suitable for fibreglass roofing.

- Also known as Sterling Board

- Size: 2440mm x 1220mm.

- Thickness: 18mm

Round Head Felt Nails Galvanised Steel - 13mm Long

Large Head firmly secures all felt products.

Product Information:

- Galvanised steel

- Lengths: 13mm

- Gauge: 3.0mm

- Weight: 0.5kg bag