You have no items in your shopping cart.
25mm x 125mm PTGV Redwood Cladding - 4.2mtr
Exterior PTGV redwood cladding suitable for door construction.
Product Information:
- Country of origin: Sweden
- Material: European redwood spruce
- FSC certified
- Kiln dried: Moisture content 15% > 18%
- Surface finish: Planed moulded
- Application: Profiled for horizontal or vertical fixing (PTG / V joint)
- Machined from / size: 25mm x 125mm
- Finished size: 20mm x 120mm
- Coverage: 109mm (9.17 metres / per sq metre)
The product images displayed are for illustrative purposes only and may not fully represent the actual product.
The recommendations regarding the application and intended use of the products are based on our current knowledge and experience, assuming proper storage, handling, and application under standard conditions. All product specifications, information, and data provided on the website are subject to change. While the information provided is believed to be accurate and reliable, it is offered without any guarantee, warranty, or responsibility of any kind.
25mm x 38mm Roofing Batten Treated - 4.8 metres
Roofing batten type A produced in Sweden BS 8417 Certified.
- Species: Spruce
- Grade: BS 8417 certified
- Moisture content: Kiln dried (18% approx.)
- Treatment: UC2
- Colour: Green
- Surface finish: Sawn
- Machined from / size: 25mm x 38mm
- Length: 4.8mts
Gutter / Guttering Half Round Profile Support Bracket
Half Round Gutter Support Clip / Brackets are fixed to a wall to allow the installation of a gutter.
- Manufacturer: Freefoam.
- Profile: Half round.
- Fitting: Gutter support bracket / clip.
- Size: 112mm.
Downpipe Round Pipe Bracket
- Profile: Round.
- Fitting: Round pipe clip.
- Size: 68mm.
Downpipe Round 112° Offset Pipe Bend
- Fitting: Downpipe 112° offset pipe bend.
Gutter / Guttering Half Round Profile 5.0mts
5 Metre length of Half Round Profile Gutter.
- Length: 5.0mts.
Gutter / Guttering Half Round Profile 90° Degree Bend
90 Degree Half Round Gutter Bend for connecting 2 lengths of gutter around a corner.
- Fitting: Gutter 90 degree bend.
Gutter / Guttering Half Round Profile Stop End Outlet
Half Round Gutter Stopend Outlets can be used at the end of a gutter to allow a downpipe to be fitted for the drainage of water.
- Fitting: Gutter stop end outlet.
Gutter / Guttering Half Round Profile External Stop End
- Fitting: Gutter external stop end.