22mm x 150mm (Nominal) Planed & Treated Whitewood Timber 4.2mtr

Whitewood Timber - 22mm x 75mm (Planed & Treated) - 4.2 Metres

This treated whitewood timber is used for various purposes and is of excellent quality originating from Sweden.

Product Information:

- Country of origin: Sweden

- Material: European Whitewood Spruce

- Treatment: UC3

- Kiln dried:  15% > 18%

- Surface finish: Planed

- Machined from / size: 22mm x 75mm

- Finished size: 18mm x 70mm

- Length: 4.2mts

OSB3 T & G 18mm External Grade Boards

Oriented Strand Board (OSB) is an engineered wood based panel board where strands of wood are laid in cross-oriented layers and glued with an ECO resin.

This results in a strong board that resists moisture, is versatile, and suitable for structural use in humid conditions.

Product Information:

- Profile: Tongue & groove

- OSB3: Suitable for fibreglass roofing

- Size: 2400mm x 600mm

- Thickness: 18mm

Onduline Corrugated Roofing Sheet Black - 2mts x 950mm x 3mm

Onduline is an extremely tough, lightweight, corrugated roofing and wall cladding material manufactured utilising a base board produced from recycled cellulose fibres which is saturated with bitumen under intense pressure and heat.

Onduline sheets are finished with a colour pigment and resin impregnation process which stains the colour into the sheet to provide excellent colour retention properties and enhanced U.V. resistance.

Product Information:

- Bituminous black corrugated roofing system

- Thermal resistance R value: 0.04mK/W

- Corrugation height: 38mm

- Corrugation width: 95mm

- Recommendation: 30 fixings per sheet

- Length: 2000mm

- Width: 950mm

- Thickness: 3mm

- Cover width: 855mm

- Colour: Black

Thunderbolt Masonry Fixing - Priced Per Bolt

Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone. It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications. The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt. Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.

Product Information:

- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust

- Remove any loose debris from the hole

- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action

- Tighten the Thunderbolt™ to secure the fixture firmly in place

Gutter / Guttering Square Profile Support Bracket

Square Gutter Support Clip / Brackets are fixed to a wall to allow the installation of a gutter.

Product Information:

- Manufacturer: Freefoam.

- Profile: Square.

- Fitting: Gutter support bracket.

- Size: 114mm.

19mm x 38mm Roofing Batten Treated - 4.8 metres

Roofing batten type A produced in Sweden BS 8417 Certified.

Product Information:

- Country of origin: Sweden

- Species: Spruce

- Grade: BS 8417 certified

- Moisture content: Kiln dried (18% approx.)

- Treatment: UC2

- Colour: Green

- Surface finish: Sawn

- Machined from / size: 19mm x 38mm

- Length: 4.8mts

Fence Post Caps Square Chamfered Treated Green

Square chamfered treated fence post cap for 100mm post.

Product Information:

- For 100mm fence post (125mm cap).

O'Brien Post Mix 20kg Bag

O’Brien Cement Post Mix is a simple to use rapid setting concrete mix for fixing posts in the ground. It is pre-mixed and blended and contains cement, dried aggregates and admixtures. The cement used is O’Brien Cement manufactured in Ireland and conforms to I.S EN 197-1 2011.

Product Information:

1. 1. Dig a hole to required size for post, half fill the hole with water and place the post in the hole,
2. 2. Tip the pre-mixed aggregate uniformly into the hole around the post, until it is above the level of water,
3. 3. If any dry powder remains visible at this stage, add additional water until absorbed by the material,
4. 4. Adjust the post into position and support appropriately until material set occurs, which takes approximately 10 minutes.

Flush Fit Bolt Down Shoe - Hot Dipped Galvanised - 75mm

Flush fit bolt down fence post shoes are a quick and easy way to erect fencing and garden posts as they require no digging or concreting into place, saving time and money. They are designed to be fixed down onto an existing concrete base or wall and are perfect for patio fencing, decking, pergolas or car ports where the post needs to be fitted flush against a wall. The bolt secure version features 2x 8mm carriage bolts.

Product Information:

- Prevents against post rot and decay as it will hold the base of the post above ground level

- Hot dipped galvanised for maximum rust protection

- Can be painted over

4" Tower Bolt - Galvanised Finish

Product Information:

- Finish: Galvanised (Silver)

- Lengths: 100mm