22mm MR P5 EGGER T&G Chipboard Flooring - 2400mm x 600mm

18mm EGGER T&G Chipboard Flooring Moisture Resistant P5

Flooring designed for easy installation available in 18mm and 22mm thick.

Used for flooring and lofts but is suitable for use in most flooring applications.

Product Information:

- Brand: Egger (Please note: these are not compatible with our other P5 T&G boards)

- Colour may vary

- Tongue & groove design for added strength

- Moisture resistant P5

- Size: 2400mm x 600mm

- Thickness: 18mm

11mm OSB3 External Grade Composite Board - 2440mm x 1220mm

Oriented Strand Board (OSB) is an engineered wood based panel board where strands of wood are laid in cross-oriented layers and glued with an ECO resin. This results in a strong board that resists moisture, is versatile, and suitable for structural use in humid conditions.

Product Information:

- OSB3: Suitable for fibreglass roofing.

- Also known as Sterling Board

- Size: 2440mm x 1220mm.

- Thickness: 11mm

25mm x 50mm BS5534 Engineered Roofing Batten Treated - 4.8 Metres

Roofing batten engineered produced in Sweden BS 5534 Certified.

Product Information:

- Country of origin: Sweden

- Species: Spruce

- Grade: BS 5534 certified

- Moisture content: Kiln dried (18% approx.)

- Treatment: UC2

- Colour: Gold

- Surface finish: Sawn

- Machined from / size: 25mm x 50mm

Concrete Block 100mm (4") Thick

This dense concrete block offers durability and reliability, making it ideal for both internal and external applications, including load-bearing walls and cavity walls.

Product Information:

- 100 mm thick concrete block for construction purposes 7.3 N

- Size: 440mm long x 215mm high x 100mm depth

- 10 Blocks per sq metre (Including 10mm mortar joint)

- Full packs of concrete blocks will be delivered by one of our crane vehicles (72 Blocks = Full Pack)

Thunderbolt Masonry Fixing - Priced Per Bolt

Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone. It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications. The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt. Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.

Product Information:

- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust

- Remove any loose debris from the hole

- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action

- Tighten the Thunderbolt™ to secure the fixture firmly in place

Onduline Corrugated Roofing Sheet Black - 2mts x 950mm x 3mm

Onduline is an extremely tough, lightweight, corrugated roofing and wall cladding material manufactured utilising a base board produced from recycled cellulose fibres which is saturated with bitumen under intense pressure and heat.

Onduline sheets are finished with a colour pigment and resin impregnation process which stains the colour into the sheet to provide excellent colour retention properties and enhanced U.V. resistance.

Product Information:

- Bituminous black corrugated roofing system

- Thermal resistance R value: 0.04mK/W

- Corrugation height: 38mm

- Corrugation width: 95mm

- Recommendation: 30 fixings per sheet

- Length: 2000mm

- Width: 950mm

- Thickness: 3mm

- Cover width: 855mm

- Colour: Black

Onduline Verge - Black

Product Information:

- Manufactured to the same specification as Onduline classic 

- Onduline roof verge is finished with a colour pigment and resin impregnation process which allows for excellent colour retention and enhanced U.V resistance

- This roof verge is ideal for your outdoor DIY project such as a summerhouse, shed, and all outbuildings

- Colour: Black

- Length: 900mm

Cement 25kg Supplied in a Weatherproof Plastic Bag

O'Brien premium grade cement for jobs which require higher strength cement, such as screeds, concrete, plastering and mortar, this premium grade product is ideal.

Product Information:

- Smooth, uniform finish, and impressive drying performance.

- Premium grade O'Brien cement with 42.5N strength which offers exceptional performance.

- Supplied in a plastic based bag.

4mm Plywood Hardwood Faced Sheet - 2440mm x 1220mm

Hardwood Faced Plywood is a strong and versatile wood material, ideal for both indoor and outdoor DIY projects such as furniture, cabinetry, and construction. Crafted with an exterior-grade hardwood veneer, it offers a sturdy and dependable base for any woodworking or home improvement task, designed to endure various conditions.

18mm Plywood Sheet CDX Shuttering External Grade - 2440mm x 1220mm

Versatile plywood suitable for shuttering, hoarding, and a wide range of general building applications.

Product Information:

- CDX Grade Plywood

- Size: 2440mm x 1220mm

- Thickness: 18mm

Onduline Ridge - Black - 1 Metre

The roof ridges are ideal for your outdoor DIY projects such as summerhouses, sheds and all outbuildings.

Product Information:

- Manufactured to the same specification as Onduline classic

- Onduline roof ridges are finished with a colour pigment and resin impregnation process which allows for excellent colour retention and enhanced U.V resistance

- We stock Black Onduline roof ridges in two different lengths.