You have no items in your shopping cart.
Zeta Bathroom Handles - Satin Chrome - 175mm x 45mm
Zeta lever bathroom handle, for use on internal bathroom/WC doors in conjunction with a mortice bathroom lock.
Product Information:
- Contemporary style
- Used with bathroom lock
- Suitable for most wooden doors
- Internal use
- Screws included
- Pack Quantity: 1 Pairs
The product images displayed are for illustrative purposes only and may not fully represent the actual product.
The recommendations regarding the application and intended use of the products are based on our current knowledge and experience, assuming proper storage, handling, and application under standard conditions. All product specifications, information, and data provided on the website are subject to change. While the information provided is believed to be accurate and reliable, it is offered without any guarantee, warranty, or responsibility of any kind.
Plasterboard Moisture Resistant Taper Edge 12.5mm x 1200mm x 2400mm
Moisture Resistant plasterboard is designed to tolerate humid and moisture conditions, It has silicone additives and water repellent liners which create a product that is suitable for use in kitchens, bathrooms, plus areas where levels of humidity are high.
- Increased moisture resistance over standard plasterboard
- Has water repellent additives in the paper liners and core
- Suitable for use on external soffits in sheltered positions
- Perfect for kitchen walls, bathrooms, and ceilings
- 12.5mm thick x 1200mm wide x 2400mm long
- Taper edged
Thunderbolt Masonry Fixing - Priced Per Bolt
Thunderbolt™ is the original self tapping masonry anchor with the power to be used on a whole range of construction materials such as concrete, brick and stone. It is a single piece, non expansion anchor, meaning that it does not require a wall plug or resin, and therefore makes it an ideal solution for close to edge fixing applications. The threaded anchor and self tapping action allow for a safe strong anchorage, with the substrate becoming the nut to the bolt. Installation is quick and easy, making it the ideal general purpose anchor which is versatile even in a temporary situation.
- Drill a hole the same size as the Thunderbolt™ into the masonry, ensure the hole is a little deeper than the bolt to allow for dust
- Remove any loose debris from the hole
- Screw in the Thunderbolt™ with a suitable driver and apply a slight downward pressure to start the self tapping action
- Tighten the Thunderbolt™ to secure the fixture firmly in place
6.0 x 100mm Velocity Premium Multi Purpose Screw (Pack of 100)
The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications.
- Dual angle thread designed for superior hold
- Partially threaded stops the timber jacking.
- Rapid drive twist cut enhances drive performance
- Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque.
- Manufactured by Knauf.
- Lightweight non combustible mineral wool roll which is designed to provide thermal and acoustic insulation in lofts.
- The rolls can be used in other applications where a lightweight insulation is required and may be split into three commonly required widths.
- Energy performance will improve using this product.
- Thermal conductivity: 0.044W/mK.
- Nominal density: 10 kg/m2.
- Fire performance: Euroclass A1 (non combustible).
Pack size:
- 200mm (6.84 mts2)
Drywall Screws - PH - Bugle - Coarse Thread - Grey - 3.5 x 38
Used to secure wallboards to stud work.
- Phillips No.2 recess for a positive drive
- Bugle head to reduce likelihood of damaging the board surface
- 25° super sharp point for ease of penetration
- Coarse thread for extreme hold
- Fire Classification - A1
138mm x 32mm Firecheck Door Lining Set
Fire check door lining set 32mm x 138mm finished size (28mm x 132mm) with reversible head for 30" & 33" doors rebated for intumescent strips.
- Actual finished size (28mm x 132mm) for fire regulations
- Stops are not included
- Intumescent strips are not included
- Reversible head to suit 30" and 33" doors
Grade 13 Fire Door Hinges - Satin Stainless Steel - 101mm x 76mm x 3mm
Designed for use on heavy duty fire doors in public buildings. Lubricated ball bearing washers provide a lifetime of smooth door operation making them ideal for use with door closers as they reduce closing friction. Fixings included.
- Smooth ball bearing action
- Suitable for 30 & 60 minute fire doors weighing up to 120kg
- For doors with heavy traffic - tested to 200,000 cycles
- CE Approved - BS EN 1935
Tubular Latch - Satin Nickel - 76 case / 57 backset
A medium duty tubular latch suitable for use in domestic and commercial applications. The latch should be used with sprung door furniture.
- Suitable for 30 & 60 minute fire doors
- Bolt through
- Use with sprung furniture
- Complete with dust box and fixing screws
2' 9" - Frame Ledge & Brace UK Manufactured Solid Pine Tongue & Grooved Solid Door
Solid pine frame ledge & brace doors UK manufactured from tongue / grooved V jointed Swedish redwood.
- UK manufactured
- Style: Frame ledge & brace (The braces are loose pinned)
- Material: Solid pine V jointed t&g (Swedish timber)
- 33" wide x 78" tall